References
- Baghaee Moghaddam, T., & & Baaj, H. (2016). The use of rejuvenating agents in production of recycled hot mix asphalt: A systematic review. Construction and Building Materials, 114, 805–816. doi: https://doi.org/10.1016/J.CONBUILDMAT.2016.04.015
- Cavalli, M. C., Partl, M. N., & Poulikakos, L. D. (2017). Measuring the binder film residues on black rock in mixtures with high amounts of reclaimed asphalt. Journal of Cleaner Production, 149, 665–672. doi: https://doi.org/10.1016/j.jclepro.2017.02.055
- Cavalli, M. C., Zaumanis, M., Mazza, E., Partl, M. N., & Poulikakos, L. D. (2018). Effect of ageing on the mechanical and chemical properties of binder from RAP treated with bio-based rejuvenators. Composites Part B: Engineering, 141, 174–181. doi: https://doi.org/10.1016/j.compositesb.2017.12.060
- Jung, D. H., & Vinson, T. S. (1994). Low-temperature cracking: Test selection. Washington, DC: SHRP.
- Karlsson, R., & Isacsson, U. (2006). Material-related aspects of asphalt recycling – state-of-the-art. Journal of Materials in Civil Engineering, 18, 81–92. doi: https://doi.org/10.1061/(ASCE)0899-1561(2006)18:1(81)
- Kriz, P., Grant, D. L., Veloza, B. A., Gale, M. J., Blahey, A. G., Brownie, J. H., … Maccarrone, S. (2014). Blending and diffusion of reclaimed asphalt pavement and virgin asphalt binders. Road Materials and Pavement Design, 15(sup1), 78–112. doi: https://doi.org/10.1080/14680629.2014.927411
- McDaniel, R. S., Shah, A., Huber, G. A., & Copeland, A. (2012). Effects of reclaimed asphalt pavement content and virgin binder grade on properties of plant produced mixtures. Road Materials and Pavement Design, 13(sup1), 161–182. doi: https://doi.org/10.1080/14680629.2012.657066
- Mogawer, W., Austerman, A., Mohammad, L., & Kutay, M. E. (2013). Evaluation of high RAP-WMA asphalt rubber mixtures. Road Materials and Pavement Design, 14(sup2), 129–147. doi: https://doi.org/10.1080/14680629.2013.812846
- Stimilli, A., Virgili, A., & Canestrari, F. (2015). New method to estimate the “re-activated” binder amount in recycled hot-mix asphalt. Road Materials and Pavement Design, 16(sup1), 442–459. doi: https://doi.org/10.1080/14680629.2015.1029678
- Williams, M. L., Landel, R. F., & Ferry, J. D. (1955). The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77(14), 3701–3707. doi: https://doi.org/10.1021/ja01619a008
- Witczak, M., & Fonseca, O. (1996). Revised predictive model for dynamic (complex) modulus of asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1540, 15–23. doi:10.3141/1540-03 doi: https://doi.org/10.1177/0361198196154000103
- Zaumanis, M., Boesiger, L., Kunz, B., Cavalli, M. C., & Poulikakos, L. (2019). Determining optimum rejuvenator addition location in asphalt production plant. Construction and Building Materials, 198, 368–378. doi: https://doi.org/10.1016/J.CONBUILDMAT.2018.11.239
- Zaumanis, M., Cavalli, M. C., & Poulikakos, L. D. (2018). Effect of rejuvenator addition location in plant on mechanical and chemical properties of RAP binder. International Journal of Pavement Engineering. doi: https://doi.org/10.1080/10298436.2018.1492133
- Zaumanis, M., & Mallick, R. B. (2015). Review of very high-content reclaimed asphalt use in plant-produced pavements: State of the art. International Journal of Pavement Engineering, 16(1), 39–55. doi: https://doi.org/10.1080/10298436.2014.893331
- Zaumanis, M., Mallick, R. B., & Frank, R. (2014). Determining optimum rejuvenator dose for asphalt recycling based on Superpave performance grade specifications. Construction and Building Materials, 69, 159–166. doi: https://doi.org/10.1016/j.conbuildmat.2014.07.035
- Zaumanis, M., Mallick, R. B., & Frank, R. (2016). 100% hot mix asphalt recycling: Challenges and benefits. In Transportation research procedia (Vol. 14, pp. 3493–3502). doi: https://doi.org/10.1016/j.trpro.2016.05.315
- Zaumanis, M., Poulikakos, L. D., & Partl, M. N. (2018). Performance-based design of asphalt mixtures and review of key parameters. Materials and Design, 141, 185–201. doi: https://doi.org/10.1016/j.matdes.2017.12.035