Effect of synthetic fibres on fracture performance of asphalt mortar

References

• Apostolidis, P., Liu, X., Scarpas, A., Kasbergen, C., & van de Ven, M. (2016). Advanced evaluation of asphalt mortar for induction healing purposes. Construction and Building Materials, 126, 9–25. doi: 10.1016/j.conbuildmat.2016.09.011
   Web of Science ®Google Scholar
• Edgar, R. (1998). Ten year performance of asphalt additive test section Lava Butte–Fremont highway junction section. Final report. FHWA-ORRD- 99-08. Salem: Oregon Department of Transportation.
   Google Scholar
• Erkens, S. (2002). Asphalt concrete response (ACRs): Determination, modeling and prediction (PhD Thesis). Delft University of Technology.
   Google Scholar
• Gibson, N., & Li, X. (2015). Characterizing cracking of asphalt mixtures with fibre reinforcement: Use of cyclic fatigue and direct tension strength tests. Transportation Research Record: Journal of the Transportation Research Board, 2507, 57–66. doi: 10.3141/2507-07
   Google Scholar
• Gibson, N., Qi, X., Shenoy, A., Al-Khateeb, G., Kutay, E., Andriescu, A., … Harman, T. (2012). Performance testing for superpave and structural validation. Report FHWA-HRT-11-045. McLean, VA: Federal Highway Administration, U.S. Department of Transportation.
   Google Scholar
• Guistozzi, F., Crispino, M., Toraldo, E., & Mariani, E. (2015). Mix design of polymer-modified and fibre-reinforced warm-mix asphalts with high amount of reclaimed asphalt pavement: Achieving sustainable and high-performing pavements. In Transportation Research Record: Journal of the Transportation Research Board, no. 2523 (pp. 3–10). Washington, DC: Transportation Research Board of National Academies.
   Google Scholar
• Ho, C., Shan, J., Wang, F., Chen, Y., & Almonnieay, A. (2016). Performance of fibre-reinforced polymer modified asphalt: Two-year review in Northern Arizona. In Transportation Research Record: Journal of the Transportation Research Board, no. 2575 (pp. 138–149). Washington, DC: Transportation Research Board of National Academies.
   Google Scholar
• Jassal, M., & Ghosh, S. (2002). Aramid fibres-an overview. Indian Journal of Fibre and Textile Research, 27(3), 290–306.
   Web of Science ®Google Scholar
• Kaloush, K. E., Biligiri, K. P., Zeiada, W. A., Rodezno, M. C., & Reed, J. X. (2010). Evaluation of fibre-reinforced asphalt mixtures using advanced material characterization tests. Journal of Testing and Evaluation, 38(4), 1–12.
   Web of Science ®Google Scholar
• Mather, R. (2009). The structure of polyolefin fibres. In S.J. Eichhorn, J.W.S. Hearle, M. Jaffe, & T. Kikutani (Eds.), Handbook of textile fibre structure -  Volume 1: Fundamentals and manufactured polymer fibres (pp. 276–304). Cambridge: Woodhead Publishing Series in Textiles.
   Google Scholar
• McDaniel, R., & Shah, A. (2003). Asphalt additives to control rutting and cracking. Report FHWA/IN/JTRP-2002/29. West Lafayette, IN: Purdue University.
   Google Scholar
• Miracle, D.B., & Donaldson, R.L. (2001). ASM Handbook Volume 21, Composites. Materials Park, OH: ASM International.
   Google Scholar
• Muftah, A., Bahadori, A., Bayomy, F., & Kassem, E. (2017). Fibre-reinforced hot-mix asphalt: Idaho case study. In Transportation Research Record: Journal of the Transportation Research Board, no. 2633 (pp. 98–107). Washington, DC: Transportation Research Board of National Academies.
   Google Scholar
• NCHRP Synthesis 475. (2015). Fiber additives in asphalt mixtures. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• Park, P., El-Tawil, S., & Naaman, A. (2017). Pull-out behavior of straight steel fibers from asphalt binder. Construction and Building Materials, 144, 125–137. doi: 10.1016/j.conbuildmat.2017.03.159
   Web of Science ®Google Scholar
• Prowell, D. B. (2000). Design, construction, and early performance of hot- mix asphalt stabilizer and modifier test sections. Interim report. VTRC 00-IR2. Charlottesville: Virginia Transportation Research Council.
   Google Scholar
• Qian, S., Ma, H., & Feng, J. (2014). Fiber reinforcing effect on asphalt binder under low temperature. Construction and Building Materials, 61, 120–124. doi: 10.1016/j.conbuildmat.2014.02.035
   Web of Science ®Google Scholar
• Stempihar, J., Souliman, M., & Kaloush, K. (2012). Fibre-reinforced asphalt concrete as sustainable paving material for airfields. In Transportation Research Record: Journal of the Transportation Research Board, no. 2266 (pp. 60–68). Washington, DC: Transportation Research Board of National Academies.
   Google Scholar
• TRB Circular E-C165. (2012). Alternative binders for sustainable asphalt pavements. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• TRB Circular E-C186. (2014). Enhancing durability of asphalt pavements. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• van der Zwaag, S. (2009). Structure and properties of aramid fibres. In S.J. Eichhorn, J.W.S. Hearle, M. Jaffe, & T. Kikutani (Eds.), Handbook of textile fibre structure -  Volume 1: Fundamentals and manufactured polymer fibres (Vol. 1, pp. 394–412). Cambridge: Woodhead Publishing Series in Textiles.
   Google Scholar