References
- AASHTO. (2006). Guide for design of pavement structures. Washington, DC: American Association of State Highway and Transportation Officials.
- Amouzadeh Omrani, M., & Modarres, A. (2018). Emulsified cold recycled mixtures using cement kiln dust and coal waste ash-mechanical-environmental impacts. Journal of Cleaner Production, 199, 101–111. doi: 10.1016/j.jclepro.2018.07.155
- Asphalt Institute. MS-19. (2008). Basic asphalt emulsion manual (4th ed.). Lexington, KY: Asphalt Institute and Asphalt Emulsion Manufacturers Association.
- Brown, S. F., & Needham, D. (2000). A study of cement modified bitumen emulsion mixtures. In Proceedings of association of asphalt pavement technologist (Vol. 69, pp. 92–121). Reno, NV: Association of Asphalt Paving Technologists (AAPT).
- Coppola, L., Buoso, A., Coffetti, D., Kara, P., Lorenzi, S., & D’Alessandro, F. (2017). The effect of sodium silicate on the behavior of shotcretes for tunnel lining. Journal of Scientific Research & Reports, 14(2), 1–8. doi: 10.9734/JSRR/2017/33641
- Fang, X., Garcia, A., Winnefeld, F., Partl, M. N., & Lura, P. (2016). Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt. Materials and Structures, 49(1–2), 487–498. doi: 10.1617/s11527-014-0512-3
- Frederico, V. G., Kamilla, L. V., Liedi, L. B. B., & Kim, J. J. (2018). Laboratory and field evaluation of cold recycling mixture with foamed asphalt. Road Materials and Pavement Design, 19(2), 385–399. doi: 10.1080/14680629.2016.1261726
- Garcia, A., Lura, P., & Partl, M. N. (2013). Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance. Materials and Structures, 46, 1275–1289. doi: 10.1617/s11527-012-9971-6
- Godenzoni, C., Graziani, A., Bocci, E., & Bocci, M. (2018). The evolution of the mechanical behaviour of cold recycled mixtures stabilised with cement and bitumen: Field and laboratory study. Road Materials and Pavement Design, 19(4), 856–877. doi: 10.1080/14680629.2017.1279073
- Huang, B., Shu, X., & Li, G. (2005). Laboratory investigation of Portland cement concrete containing recycled asphalt pavement. Cement and Concrete Research, 35, 2008–2013. doi: 10.1016/j.cemconres.2005.05.002
- Janotka, I. (2001). Hydration of the cement paste with Na2CO3 addition. Ceramics – Silikaty, 45(1), 16–23.
- Jenkins, K. J., Twagira, M. E., Kelfkens, R. W., & Mulusa, W. K. (2012). New laboratory testing procedures for mix design and classification of bitumen-stabilised materials. Road Materials and Pavement Design, 13(4), 618–641. doi: 10.1080/14680629.2012.742625
- Kavussi, A., & Modarres, A. (2010). Laboratory fatigue models for recycled mixes with bitumen emulsion and cement. Construction and Building Materials, 24, 1920–1927. doi: 10.1016/j.conbuildmat.2010.04.009
- Kim, S. G. (2010). Effect of heat generation from cement hydration on mass concrete placement (MSc thesis). Iowa State University, Ames, IA.
- Lin, J., Hong, J., & Xiao, Y. (2017). Dynamic characteristics of 100% cold recycled asphalt mixture using asphalt emulsion and cement. Journal of Cleaner Production, 156(Jul), 337–344. doi: 10.1016/j.jclepro.2017.04.065
- Liu, Y., Liu, M., Wang, F., & Hu, S. (2013, October). Study on the sulphoaluminate cement–asphalt composite mortar for high-speed railway repair. In Proceedings of the 1st international conference on sulphoaluminate cement: Materials and engineering technology (pp. 23–24). Wuhan.
- Luigi, C., Coffetti, D., Kara, P., & Lorenzi, S. (2017). The effect of sodium silicate on the behavior of shotcretes for tunnel lining. Journal of Scientific Research and Reports, 14(2), 1–8. doi: 10.24191/srj.v14i2.9358
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018). One-part alkali-activated materials: A review. Cement and Concrete Research, 103, 21–34. doi: 10.1016/j.cemconres.2017.10.001
- Modarres, A., & Ayar, P. (2016). Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement. International Journal of Pavement Engineering, 17(3), 211–224. doi: 10.1080/10298436.2014.979821
- Modarres, A., & Rahmanzadeh, M. (2014). Application of coal waste powder as filler in hot mix asphalt. Construction and Building Materials, 66, 476–483. doi: 10.1016/j.conbuildmat.2014.06.002
- Montepara, A., & Giuliani, F. (2001, July 29–August 1). The role of cement in the recycling of asphalt pavement cold-stabilized with bituminous emulsions. Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control, Auburn, AL.
- Niazi, Y., & Jalili, M. (2009). Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23, 1338–1343. doi: 10.1016/j.conbuildmat.2008.07.020
- Pouliot, N., Marchand, J., & Pigeon, M. (2003). Hydration mechanisms, micro-structure, and mechanical properties of mortars prepared with mixed binder cement slurry-asphalt emulsion. Journal of Materials in Civil Engineering, 15, 54–59. doi: 10.1061/(ASCE)0899-1561(2003)15:1(54)
- Rutherford, T., Wang, Z., Shu, X., Huang, B., & Clarke, D. (2014). Laboratory investigation into mechanical properties of cement emulsified asphalt mortar. Construction and Building Materials, 65, 76–83. doi: 10.1016/j.conbuildmat.2014.04.113
- Wang, Z., Shu, X., Rutherford, T., Huang, B., & Clarke, D. (2015). Effects of asphalt emulsion on properties of fresh cement emulsified asphalt mortar. Construction and Building Materials, 75, 25–30. doi: 10.1016/j.conbuildmat.2014.11.013
- Xu, J., Huang, S., Qin, Y., & Li, F. (2011). The impact of cement contents on the properties of asphalt emulsion stabilized cold recycling mixtures. International Journal of Pavement Research and Technology, 4(1), 48–55.
- Yuan, B., Yu, Q. L., & Brouwers, H. J. H. (2017). Time-dependent characterization of Na2CO3 activated slag. Cement and Concrete Composites, 84, 188–197. doi: 10.1016/j.cemconcomp.2017.09.005