References
- Aielo, P. B., Borges, F. A., Romeira, K. M., Miranda, M. C. R., Arruda, L. B. D., Drago, B. D. C., & Herculano, R. D. (2014). Evaluation of sodium diclofenac release using natural rubber latex as carrier. Materials Research, 17, 146–152.
- Al-Mansob, R. A., Ismail, A., Alduri, A. N., Azhari, C. H., Karim, M. R., & Yusoff, N. I. M. (2014). Physical and rheological properties of epoxidized natural rubber modified bitumens. Construction and Building Materials, 63, 242–248.
- Allen, P. W. (1958). The swelling behavior of natural rubber latex. Journal of Colloid Science, 13(5), 483–487.
- Allen, P. W., & Bristow, G. M. (1963). The gel phase in natural rubber. Rubber Chemistry and Technology, 36(4), 1024–1034.
- American Association of State Highway and Transportation Officials. (2004). M20-70. Penetration-graded asphalt cement. Washington, DC: AASHTO.
- Aspromonte, S. G., Miró, E. E., & Boix, A. V. (2012). FTIR studies of butane, toluene and nitric oxide adsorption on Ag exchanged Na Mordenite. Adsorption, 18(1), 1–12.
- Auria, R., Bennet, J. C., Cousin, B., & Sainte-Beewe, J. (1991). Drying of natural rubber in sheet form-internal structure and water transfer. Journal of Natural Rubber Research (Malaysia), 6(4), 267–280.
- Azahar, N. F. B. M., Hassan, N. B. A., Jaya, R. P., Kadir, M. A. B. A., Yunus, N. Z. B. M., & Mahmud, M. Z. H. (2016). An overview on natural rubber application for asphalt modification. International Journal of Agriculture, Forestry and Plantation, 2, 212–218.
- Bakar, S. K. A., Abdulah, M. E., Kamal, M. M., Rahman, R. A., Hadithon, K. A., Buhari, R., & Tajudin, S. A. A. (2018). Evaluating the Rheological Properties of Waste Natural Rubber Latex Modified Binder. In E3S Web of Conferences, 34.
- Becker, Y., Méndez, M. P., & Rodríguez, Y. (2001). Polymer-modified asphalt. Vision Tecnologica, 9, 39–50.
- Bhowmick, A. K., & Stephens, H. (eds.). (2000). Handbook of elastomers. New York: CRC Press.
- Ciesielski, A. (1999). An introduction to rubber technology. Shropshire: Rapra Technology Limited.
- Coates, J. (2000). Interpretation of infrared spectra, A practical approach. Encyclopedia of Analytical Chemistry, 3, 10815–10837.
- Dehaghani, A. H. S., & Badizad, M. H. (2016). Experimental study of Iranian heavy crude oil viscosity reduction by diluting with heptane, methanol, toluene, gas condensate and naphtha. Petroleum, 2(4), 415–424.
- Durmaz, S., Fank, S., & Okay, O. (2002). Swelling and mechanical properties of solution-crosslinked Poly (isobutylene) Gels. Macromolecular Chemistry and Physics, 203(4), 663–672.
- Fernando, M. J., & Nadarajah, M. (1969). Use of natural rubber latex in road construction. Journal of Rubber Research Institute of Malaya, 22(5), 430–440.
- Francken, L. (1998). Bituminous binders and mixes . In RILEM Report 17. London: E & FN Spon.
- Fu, H., Xie, L., Dou, D., Li, L., Yu, M., & Yao, S. (2007). Storage stability and compatibility of asphalt binder modified by SBS graft copolymer. Construction and Building Materials, 21(7), 1528–1533.
- George, S. C., Thomas, S., & Ninan, K. N. (1996). Molecular transport of aromatic hydrocarbons through crosslinked styrene-butadiene rubber membranes. Polymer, 37(26), 5839–5848.
- Healey, A. M., Hendra, P. J., & West, Y. D. (1996). A Fourier-transform Raman study of the strain-induced crystallization and cold crystallization of natural rubber. Polymer, 37(18), 4009–4024.
- Hofer, R. (2009). Sustainable solutions for modern economies. Cambridge: Royal Society of Chemistry.
- Intapun, J., Sainte-Beuve, J., Bonfils, F., Tanrattanakul, V., Dubreucq, E., & Vaysse, L. (2010). Effect of microorganisms during the initial coagulum maturation of hevea natural rubber. Journal of Applied Polymer Science, 118(3), 1341–1348.
- Ismail, A., Al-Mansob, R. A., Yusoff, N. I. B. M., & Karim, M. R. (2012). Effect of toluene as disperser on the bitumen modified with epoxidized natural rubber with simulation. Australian Journal of Basic and Applied Sciences, 6(12), 97–101.
- Kishore, K., & Pandey, H. K. (1986). Spectral studies on plant rubbers. Progress in Polymer Science, 12(1-2), 155–178.
- Kohjiya, s., & Ikeda, y. (2014). Introduction to the unique qualities of natural rubber. In S. Kohjiya & Y. Ikeda (Eds.), Chemistry, manufacture and applications of natural rubber. Cambridge: Woodhead Publishing Limited.
- Michalica, P., Kazatchkov, I. B., Stastna, J., & Zanzotto, L. (2008). Relationship between chemical and rheological properties of two asphalts of different origins. Fuel, 87(15-16), 3247–3253.
- Misra, G. S. (1993). Introductory polymer chemistry. New Delhi: New Age International (P) Limited.
- Mouazen, M., Poulesquen, A., Bart, F., Masson, J., Charlot, M., & Vergnes, B. (2013). Rheological, structural and chemical evolution of bitumen under gamma irradiation. Fuel Processing Technology, 114, 144–153.
- Mouazen, M., Poulesquen, A., & Vergnes, B. (2011). Influence of thermomechanical history on chemical and rheological behavior of bitumen. Energy & Fuels, 25(10), 4614–4621.
- Nair, N. R., Mathew, N. M., Thomas, S., Chatterjee, P., & Siddiqui, M. A. (1998). Physical and rheological characteristics of liquid natural rubber modified bitumen. Journal of Applied Polymer Science, 68(1), 53–61.
- Obasi, H. C., Ogbobe, O., & Igwe, I. O. (2009). Diffusion characteristics of toluene into natural rubber/linear low-density polyethylene blends. International Journal of Polymer Science, 2009, 1–6.
- Othman, Z., Hainin, M. R., Warid, M. N. M., Idham, M. K., & Kamarudin, S. N. N. (2018). Cup lump modified asphalt mixture along jalan Kuala Lumpur-Kuantan, daerah Temerloh, Pahang. In MATEC Web of Conferences (Vol. 250, p. 02007). EDP Sciences.
- Polacco, G., Berlincioni, S., Biondi, D., Stastna, J., & Zanzotto, L. (2005). Asphalt modification with different polyethylene-based polymers. European Polymer Journal, 41(12), 2831–2844.
- Qin, Q., Schabron, J. F., Boysen, R. B., & Farrar, M. J. (2014). Field aging effect on chemistry and rheology of asphalt binders and rheological predictions for field aging. Fuel, 121, 86–94.
- Robinson, H. (2004). Polymers in asphalt (Vol. 15). Shropshire: Rapra Technology Limited.
- Rodgers, B. (2016). Rubber compounding: Chemistry and applications. Boca Raton, FL: Taylor & Francis Group.
- Saowapark, W., Jubsilp, C., & Rimdusit, S. (2019). Natural rubber latex-modified asphalts for pavement application: Effects of phosphoric acid and sulphur addition. Road Materials and Pavement Design, 20(1), 211–224.
- Selvavathi, V., Sekar, V. A., Sriram, V., & Sairam, B. (2002). Modifications of bitumen by elastomer and reactive polymer—a comparative study. Petroleum Science and Technology, 20(5-6), 535–547.
- Soenen, H., & Redelius, P. (2014). The effect of aromatic interactions on the elasticity of bituminous binders. Rheologica Acta, 53(9), 741–754.
- Standard and Industrial Research Institute of Malaysia. (1996). MS 124. Specification for penetration grade of bitumen for use in pavement construction. Kuala Lumpur: Standard & Industrial Research Institute of Malaysia. Malaysian Standard.
- Stastna, J., Zanzotto, L., & Vacin, O. J. (2003). Viscosity function in polymer-modified asphalts. Journal of Colloid and Interface Science, 259(1), 200–207.
- Swetha, D. V., & Rani, K. D. (2014). Effect of natural rubber on the properties of bitumen and bituminious mixes. International Journal of Civil Engineering and Technology, 5(10), 9–21.
- Thomas, S., Chan, C., Othen, L., Joy, J., & Maria, H. (2013). Composites and nanocomposites. In natural rubber materials (Vol. 2). Cambridge: Royal Society of Chemistry.
- Tuntiworawit, N., Lavansiri, D., & Phromsorn, C. (2005). The modification of asphalt with natural rubber latex. In Proceedings of the Eastern Asia Society for Transportation Studies, 5, 679–694.
- Vichitcholchai, N., Panmai, J., & Na-Ranong, N. (2012). Modification of asphalt cement by natural rubber for pavement construction. Rubber Thai Journal, 39(1), 32–39.
- Wen, Y., Bryan, J., & Kantzas, A. (2003). Estimation of diffusion coefficients in bitumen solvent mixtures as derived from low field NMR spectra. In Canadian International Petroleum Conference, 44(4), 1–10.
- Wen, Y., Wang, Y., Zhao, K., & Sumalee, A. (2015). The use of natural rubber latex as a renewable and sustainable modifier of asphalt binder. International Journal of Pavement Engineering, 18(6), 1–13.
- Yildirim, Y. (2007). Polymer modified asphalt binders. Construction and Building Materials, 21(1), 66–72.
- Yousefi, A. A. (2002). Rubber-modified bitumens. Iranian Polymer Journal, 11(5), 303–309.
- Zborowski, A., & Kaloush, K. E. (2007). Predictive equations to evaluate thermal fracture of asphalt rubber mixtures. Road Materials and Pavement Design, 8(4), 819–833.
- Zhang, F., & Yu, J. (2010). The research for high-performance SBR compound modified asphalt. Construction and Building Materials, 24(3), 410–418.
- Zielinski, J. M., & Duda, J. L. (1992). Predicting polymer/solvent diffusion coefficients using free volume theory. AIChE Journal, 38(3), 405–415.