References
- AASHTO. (1993). Guide for design of pavement structures.
- Afroughsabet, V., & Teng, S. (2019). Experiments on drying shrinkage and creep of high performance hybrid-fiber-reinforced concrete. Cement and Concrete Composites, 103481. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2019.103481.
- Arora, S., & Singh, S. P. (2016). Analysis of flexural fatigue failure of concrete made with 100% coarse recycled concrete aggregates. Construction and Building Materials, 102, 782–791. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.10.098
- ASTM C78/C78M-15. Standard test method for flexural strength of concrete (using simple beam with third-point loading). ASTM International.
- ASTM D7460-10. Standard test method for determining fatigue failure of compacted asphalt concrete subjected to repeated flexural bending. ASTM International.
- Banthia, N., & Sheng, J. (1996). Fracture toughness of micro-fiber reinforced cement composites. Cement and Concrete Composites, 18(4), 251–269. https://doi.org/https://doi.org/10.1016/0958-9465(95)00030-5
- Banthia, N., Yan, C., & Mindess, S. (1996). Restrained shrinkage cracking in fiber reinforced concrete: A novel test technique. Cement and Concrete Research, 26(1), 9–14. https://doi.org/https://doi.org/10.1016/0008-8846(95)00186-7
- Bhutta, A., Farooq, M., & Banthia, N. (2019). Performance characteristics of micro fiber-reinforced geopolymer mortars for repair. Construction and Building Materials, 215, 605–612. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.04.210
- Carlesso, D. M., de la Fuente, A., & Cavalaro, S. H. P. (2019). Fatigue of cracked high performance fiber reinforced concrete subjected to bending. Construction and Building Materials, 220, 444–455. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.06.038
- Chandrappa, A. K., & Biligiri, K. P. (2017). Flexural-fatigue characteristics of pervious concrete: Statistical distributions and model development. Construction and Building Materials, 153, 1–15. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.07.081
- Chandrappa, A. K., & Biligiri, K. P. (2018). Effect of pore structure on fatigue of pervious concrete. Road Materials and Pavement Design, 20, 1525–1547. https://doi.org/https://doi.org/10.1080/14680629.2018.1464500.
- Chen, X., Bu, J., Fan, X., Lu, J., & Xu, L. (2017). Effect of loading frequency and stress level on low cycle fatigue behavior of plain concrete in direct tension. Construction and Building Materials, 133, 367–375. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.12.085
- Chen, P. W., & Chung, D. D. L. (1993). Concrete reinforced with up to 0.2 vol% of short carbon fibres. Composites, 24(1), 33–52. https://doi.org/https://doi.org/10.1016/0010-4361(93)90261-6
- Chen, P. W., & Chung, D. D. L. (1996). Low-drying-shrinkage concrete containing carbon fibers. Composites Part B: Engineering, 27(3–4), 269–274. https://doi.org/https://doi.org/10.1016/1359-8368(95)00020-8
- Deb, S., Mitra, N., Majumder, S. B., & Maitra, S. (2018). Improvement in tensile and flexural ductility with the addition of different types of polypropylene fibers in cementitious composites. Construction and Building Materials, 180, 405–411. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.05.280
- Do, M. T., Chaallal, O., & Aïtcin, P. C. (1993). Fatigue behavior of high-performance concrete. Journal of Materials in Civil Engineering, 5(1), 96–111. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(1993)5:1(96)
- Gonzalez, A., Chamorro, A., Barrios, I., & Osorio, A. (2018). Characterization of unbound and stabilized granular materials using field strains in low volume roads. Construction and Building Materials, 176, 333–343. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.04.223
- Gupta, S., Rao, V. K., & Sengupta, J. (2008). Evaluation of polyester fiber reinforced concrete for use in cement concrete pavement works. Road Materials and Pavement Design, 9(3), 441–461. https://doi.org/https://doi.org/10.1080/14680629.2008.9690127
- Hanif, A., Usman, M., Lu, Z., Cheng, Y., & Li, Z. (2018). Flexural fatigue behavior of thin laminated cementitious composites incorporating cenosphere fillers. Materials & Design, 140, 267–277. https://doi.org/https://doi.org/10.1016/j.matdes.2017.12.003
- IRC 58. (2015). Guidelines for the design of plain jointed rigid pavements for highways (4th ed.). Indian Roads Congress.
- IS 12269. (1987). Specifications for 53 grade ordinary Portland cement. Bureau of Indian Standard.
- Kasu, S. R., Deb, S., Mitra, N., Muppireddy, A. R., & Kusam, S. R. (2019). Influence of aggregate size on flexural fatigue response of concrete. Construction and Building Materials, 229, 116922. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.116922
- Lawler, J. S., Zampini, D., & Shah, S. P. (2005). Microfiber and macrofiber hybrid fiber-reinforced concrete. Journal of Materials in Civil Engineering, 17(5), 595–604. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(595)
- Li, H., Zhang, M. H., & Ou, J. P. (2007). Flexural fatigue performance of concrete containing nano-particles for pavement. International Journal of Fatigue, 29(7), 1292–1301. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2006.10.004
- Medeiros, A., Zhang, X., Ruiz, G., Rena, C. Y., & Velasco, M. D. S. L. (2015). Effect of the loading frequency on the compressive fatigue behavior of plain and fiber reinforced concrete. International Journal of Fatigue, 70, 342–350. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2014.08.005
- Mohammadi, Y., & Kaushik, S. K. (2005). Flexural fatigue-life distributions of plain and fibrous concrete at various stress levels. Journal of Materials in Civil Engineering, 17(6), 650–658. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2005)17:6(650)
- MoRT&H. (2013). Specifications for road and bridges works, fifth revision, ministry of road transport and highways. Indian Roads Congress.
- Oh, B. H. (1986). Fatigue analysis of plain concrete in flexure. Journal of Structural Engineering, 112(2), 273–288. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(273)
- Olivier, G., Combrinck, R., Kayondo, M., & Boshoff, W. P. (2018). Combined effect of nano-silica, super absorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete. Construction and Building Materials, 192, 85–98. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.10.102
- O'Neil, E. F., III. (2008). On engineering the microstructure of high-performance concretes to improve strength, rheology, toughness, and frangibility. Dissertation Abstracts International, 69(11). https://doi.org/https://doi.org/10.21985/N2FQ7F.
- Parvez, A., & Foster, S. J. (2014). Fatigue behavior of steel-fiber-reinforced concrete beams. Journal of Structural Engineering, 141(4), 04014117. https://doi.org/https://doi.org/10.1061/(ASCE)ST.1943-541X.0001074
- Pelisser, F., Montedo, O. R. K., Gleize, P. J. P., & Roman, H. R. (2012). Mechanical properties of recycled PET fibers in concrete. Materials Research, 15(4), 679–686. https://doi.org/https://doi.org/10.1590/S1516-14392012005000088
- Saje, D., Bandelj, B., Šušteršič, J., Lopatič, J., & Saje, F. (2010). Shrinkage of polypropylene fiber-reinforced high-performance concrete. Journal of Materials in Civil Engineering, 23(7), 941–952. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000258
- Siddique, R., Kapoor, K., Kadri, E. H., & Bennacer, R. (2012). Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete. Construction and Building Materials, 29, 270–278. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2011.09.011
- Silva, D. A. D., Betioli, A. M., Gleize, P. J. P., Roman, H. R., Gomez, L. A., & Ribeiro, J. L. D. (2005). Degradation of recycled PET fibers in Portland cement-based materials. Cement and Concrete Research, 35(9), 1741–1746. https://doi.org/https://doi.org/10.1016/j.cemconres.2004.10.040
- Singh, S. P., & Kaushik, S. K. (2003). Fatigue strength of steel fibre reinforced concrete in flexure. Cement and Concrete Composites, 25(7), 779–786. https://doi.org/https://doi.org/10.1016/S0958-9465(02)00102-6
- Sivakumar, A., & Santhanam, M. (2007). Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres. Cement and Concrete Composites, 29(8), 603–608. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2007.03.006
- Smith, K. D., & Roesler, J. R. (2004). Review of fatigue models for concrete airfield pavement design. In Moses Karakouzian (Ed.), Airfield pavements: Challenges and new technologies (pp. 231–258). ASCE.
- Sohel, K. M. A., Al-Jabri, K., Zhang, M. H., & Liew, J. R. (2018). Flexural fatigue behavior of ultra-lightweight cement composite and high strength lightweight aggregate concrete. Construction and Building Materials, 173, 90–100. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.03.276
- Tan, T., Santos, S. F. D., Savastano, H., & Soboyejo, W. O. (2012). Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites. Journal of Materials Science, 47(6), 2864–2874. https://doi.org/https://doi.org/10.1007/s10853-011-6116-1
- Xiao, J., Li, H., & Yang, Z. (2013). Fatigue behavior of recycled aggregate concrete under compression and bending cyclic loadings. Construction and Building Materials, 38, 681–688. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2012.09.024
- Xu, F., Zhou, M., Chen, J., & Ruan, S. (2014). Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material. Construction and Building Materials, 63, 142–149. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.04.054
- Yeon, K. S., Choi, Y. S., Kim, K. K., & Yeon, J. H. (2017). Flexural fatigue life analysis of unsaturated polyester-methyl methacrylate polymer concrete. Construction and Building Materials, 140, 336–343. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.02.116
- Yeon, K. S., Jin, N. J., & Yeon, J. H. (2018). Effect of methyl methacrylate monomer on properties of unsaturated polyester resin-based polymer concrete. In Mahmoud M. Reda Taha (Ed.), International congress on polymers in concrete (pp. 165–171). Springer.
- Yuan, J., Chen, X., Shen, N., Fan, X., & Lu, J. (2019). Experimental study on the pore structure variation of self-compacting rubberised concrete under fatigue load. Road Materials and Pavement Design, 1–18. https://doi.org/https://doi.org/10.1080/14680629.2019.1643396
- Zhang, J., Stang, H., & Li, V. C. (1999). Fatigue life prediction of fiber reinforced concrete under flexural load. International Journal of Fatigue, 21(10), 1033–1049. https://doi.org/https://doi.org/10.1016/S0142-1123(99)00093-6