References
- Allen, N. S., Edge, M., Wilkinson, A., Liauw, C. M., Mourelatou, D., Barrio, J., & Martínez-Zaporta, M. A. (2001). Degradation and stabilisation of styrene–ethylene–butadiene–styrene. Polymer Degradation and Stability, 71(1), 113–122. doi: https://doi.org/10.1016/S0141-3910(00)00162-2
- ASTM. (2013a). Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). ASTM D6521.
- ASTM. (2013b). Standard test method for penetration of bituminous materials. ASTM D5.
- ASTM. (2014). Standard test method for softening point of bitumen (ring-and-ball apparatus). ASTM D36.
- ASTM. (2015). Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. ASTM D7175.
- ASTM. (2016). Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer. ASTM D6648.
- ASTM. (2017). Standard test method for ductility of asphalt materials. ASTM D113.
- ASTM. (2019). Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). ASTM D2872.
- Azahar, W. N. A. W., Jaya, R. P., Hainin, M. R., Bujang, M., & Ngadi, N. (2016). Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder. Construction and Building Materials, 126, 218–226. doi: https://doi.org/10.1016/j.conbuildmat.2016.09.032
- Baghaee Moghaddam, T., & Baaj, H. (2016). The use of rejuvenating agents in production of recycled hot mix asphalt: A systematic review. Construction and Building Materials, 114, 805–816. doi: https://doi.org/10.1016/j.conbuildmat.2016.04.015
- Behnood, A. (2019). Application of rejuvenators to improve the rheological and mechanical properties of asphalt binders and mixtures: A review. Journal of Cleaner Production, 231, 171–182. doi: https://doi.org/10.1016/j.jclepro.2019.05.209
- Chen, M., Leng, B., Wu, S., & Sang, Y. (2014). Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders. Construction and Building Materials, 66, 286–298. doi: https://doi.org/10.1016/j.conbuildmat.2014.05.033
- Chen, Z., Zhang, H., Duan, H., & Shi, C. (2021). Improvement of thermal and optical responses of short-term aged thermochromic asphalt binder by warm-mix asphalt technology. Journal of Cleaner Production, 279, 123675. doi: https://doi.org/10.1016/j.jclepro.2020.123675
- Elkashef, M., Williams, R. C., & Cochran, E. (2018). Investigation of fatigue and thermal cracking behavior of rejuvenated reclaimed asphalt pavement binders and mixtures. International Journal of Fatigue, 108, 90–95. doi: https://doi.org/10.1016/j.ijfatigue.2017.11.013
- Gogoi, G., Mandal, M., & Maji, T. K. (2019). Study of properties of modified soybean oil based composite reinforced with chicken feather. Fibers and Polymers, 20(5), 1061–1068. doi: https://doi.org/10.1007/s12221-019-8843-x
- Hong, Y., Chen, L., Song, G., Bassir, D., Cheng, S., Shi, X., Liu, H., & Tang, G. (2018). Effect of in situ reaction on thermal and mechanical properties of polylactide/talc composites. Polymer Composites, 39(S3), E1618–E1625. doi: https://doi.org/10.1002/pc.24530
- Hou, X. D., Xiao, F. P., Wang, J. G., & Serji, A. (2018). Identification of asphalt aging characterization by spectrophotometry technique. Fuel, 226, 230–239. doi: https://doi.org/10.1016/j.fuel.2018.04.030
- Hu, K., Han, S., Liu, Z. Z., & Niu, D. Y. (2019). Determination of morphology characteristics of polymer-modified asphalt by a quantification parameters approach. Road Materials and Pavement Design, 20(6), 1306–1321. doi: https://doi.org/10.1080/14680629.2018.1443831
- Ingrassia, L. P., Lu, X., Ferrotti, G., & Canestrari, F. (2019). Renewable materials in bituminous binders and mixtures: Speculative pretext or reliable opportunity? Resources, Conservation and Recycling, 144, 209–222. doi: https://doi.org/10.1016/j.resconrec.2019.01.034
- Jamal, H. I., Yaseen, G., & Aziz, A. (2018). Influence of Cereclor on the performance of aged asphalt binder. International Journal of Pavement Engineering, 21(11), 1–12. doi:https://doi.org/10.1080/10298436.2018.1542694.
- Karadeniz, K., Calokoglu, Y., & Sen, M. Y. (2017). A novel polyurethanes from epoxidized soybean oil synthesized by ring opening with bifunctional compounds. Polymer Bulletin, 74(4), 2819–2839. doi: https://doi.org/10.1007/s00289-016-1867-0
- Kuang, D., Jiao, Y., Ye, Z., Lu, Z., Chen, H., Yu, J., & Liu, N. (2018). Diffusibility enhancement of rejuvenator by epoxidized soybean oil and its influence on the performance of recycled hot mix asphalt Mixtures. Materials (Basel), 11(5), 1–11. doi:https://doi.org/10.3390/ma11050833.
- Laukkanen, O.-V., Soenen, H., Winter, H. H., & Seppälä, J. (2018). Low-temperature rheological and morphological characterization of SBS modified bitumen. Construction and Building Materials, 179, 348–359. doi: https://doi.org/10.1016/j.conbuildmat.2018.05.160
- Lee, T. H., Park, Y. I., Lee, S.-H., Shin, J., Noh, S. M., & Kim, J. C. (2019). A crack repair patch based on acrylated epoxidized soybean oil. Applied Surface Science, 476, 276–282. doi: https://doi.org/10.1016/j.apsusc.2018.12.267
- Liu, S., Cao, W., Fang, J., & Shang, S. (2009). Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt. Construction and Building Materials, 23(7), 2701–2708. doi: https://doi.org/10.1016/j.conbuildmat.2008.12.009
- Liu, S., Cao, W., Shang, S., Qi, H., & Fang, J. (2010). Analysis and application of relationships between low-temperature rheological performance parameters of asphalt binders. Construction and Building Materials, 24(4), 471–478. doi: https://doi.org/10.1016/j.conbuildmat.2009.10.015
- Lu, X. H., & Isacsson, U. (1998). Chemical and rheological evaluation of ageing properties of SBS polymer modified bitumens. Fuel, 77(9-10), 961–972. doi: https://doi.org/10.1016/S0016-2361(97)00283-4
- Lu, X., Talon, Y., & Redelius, P. (2008). Aging of bituminous binders – laboratory tests and field data. In Proceedings of the E&E Congress (pp. 1–12). Copenhagen: European Asphalt Pavement Association (EAPA).
- Ming, W. S., Ray, C. J., & Raymond, T. C. C. (1996). Infrared studies of thermal oxidative degradation of polystyrene-block polybutadiene-block-polystyrene thermoplastic elastomers. Polymer Degradation and Stability, 52(1), 51–57. doi: https://doi.org/10.1016/0141-3910(95)00226-X
- Mogawer, W., Bennert, T., Daniel, J. S., Bonaquist, R., Austerman, A., & Booshehrian, A. (2012). Performance characteristics of plant produced high RAP mixtures. Road Materials and Pavement Design, 13(sup1), 183–208. doi: https://doi.org/10.1080/14680629.2012.657070
- Qiu, Y., Ding, H., Rahman, A., & Wang, W. (2018). Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure. Construction and Building Materials, 174, 202–209. doi: https://doi.org/10.1016/j.conbuildmat.2018.04.056
- Maria da Conceição Cavalcante Lucena, Soares, S. d. A., & Soares, J. B. (2004). Characterization and thermal behavior of polymer-modified asphalt. Materials Research, 7(4), 529–534. doi: https://doi.org/10.1590/S1516-14392004000400004
- Wei, C., Duan, H., Zhang, H., & Chen, Z. (2019). Influence of SBS modifier on aging behaviors of SBS-modified asphalt. Journal of Materials in Civil Engineering, 31(9), 04019184. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002832
- Wei, C., Zhang, H., & Duan, H. (2020). Effect of catalytic-reactive rejuvenator on structure and properties of aged SBS modified asphalt binders. Construction and Building Materials, 246, 118531. https://doi.org/10.1016/j.conbuildmat.2020.118531.
- Xu, X., Yu, J., Zhang, C., Xu, S., Xue, L., & Xie, D. (2016). Investigation of aging behavior and thermal stability of styrene-butadiene-styrene tri-block copolymer in blends. Polymer Korea, 40(6), 947. doi: https://doi.org/10.7317/pk.2016.40.6.947
- Xu, J., Zhang, A., Zhou, T., Cao, X., & Xie, Z. (2007). A study on thermal oxidation mechanism of styrene–butadiene–styrene block copolymer (SBS). Polymer Degradation and Stability, 92(9), 1682–1691. doi: https://doi.org/10.1016/j.polymdegradstab.2007.06.008
- Yan, Y., Cocconcelli, C., Roque, R., Nash, T., Zou, J., Hernando, D., & Lopp, G. (2015). Performance evaluation of alternative polymer-modified asphalt binders. Road Materials and Pavement Design, 16(sup1), 389–403. doi: https://doi.org/10.1080/14680629.2015.1030830
- Yilmaz, M., & Çeloğlu, M. E. (2013). Effects of SBS and different natural asphalts on the properties of bituminous binders and mixtures. Construction and Building Materials, 44, 533–540. doi: https://doi.org/10.1016/j.conbuildmat.2013.03.036
- Zaumanis, M., Mallick, R. B., & Frank, R. (2015). Evaluation of different recycling agents for restoring aged asphalt binder and performance of 100% recycled asphalt. Materials and Structures, 48(8), 2475–2488. doi:https://doi.org/10.1617/s11527-014-0332-5.
- Zeng, M., Li, J., Zhu, W., & Xia, Y. (2018). Laboratory evaluation on residue in castor oil production as rejuvenator for aged paving asphalt binder. Construction and Building Materials, 193, 276–285. doi: https://doi.org/10.1016/j.conbuildmat.2018.10.204
- Zhang, H., Chen, Z., Xu, G., & Shi, C. (2018a). Evaluation of aging behaviors of asphalt binders through different rheological indices. Fuel, 221, 78–88. doi: https://doi.org/10.1016/j.fuel.2018.02.087
- Zhang, H., Chen, Z., Xu, G., & Shi, C. (2018b). Physical, rheological and chemical characterization of aging behaviors of thermochromic asphalt binder. Fuel, 211, 850–858. doi:https://doi.org/10.1016/j.fuel.2017.09.111.
- Zhu, J., Birgisson, B., & Kringos, N. (2014). Polymer modification of bitumen: Advances and challenges. European Polymer Journal, 54, 18–38. doi: https://doi.org/10.1016/j.eurpolymj.2014.02.005
- Zhu, C., Zhang, H., Guo, H., Wu, C., & Wei, C. (2019). Effect of gradations on the final and long-term performance of asphalt emulsion cold recycled mixture. Journal of Cleaner Production, 217, 95–104. doi:https://doi.org/10.1016/j.jclepro.2019.01.264.
- Zidan, M. D., Allaf, A. W., Allahham, A., & Al-Zier, A. (2017). Optical nonlinearities of tetracarbonyl-chromium triphenyl phosphine complex. Chinese Physics B, 26(4), 218–222. doi:https://doi.org/10.1088/1674-1056/26/4/044205.