References
- AASHTO-T315. (2012). Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). American Association of State Highway and Transportation Officials.
- AASHTO-TP91. (2015). Standard method of test for determining asphalt binder bond strength by means of the binder bond strength (BBS) test. American Association of State Highway and Transportation Officials.
- Al-Qadi, I. L., Aurangzeb, Q., Carpenter, S. H., Pine, W. J., & Trepanier, J. (2012). Impact of high RAP contents on structural and performance properties of asphalt mixtures (0197-9191).
- ASTMD2872-12e1. (2012). Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). ASTM International. www.astm.org
- ASTMD3279. (2007). Standard test method for n-heptane insolubles. Annual Book of Standards.
- ASTMD5404. (2017). Standard practice for recovery of asphalt from solution using the rotary evaporator. ASTM International. www.astm.org
- ASTMD6521-13. (2013). Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). ASTM International.
- ASTMD6925-15. (2015). Standard test method for preparation and determination of the relative density of asphalt mix specimens by means of the superpave gyratory compactor. ASTM International. www.astm.org
- Begley, J., & Landes, J. (1972). The J integral as a fracture criterion fracture toughness: Part II. ASTM International.
- Bowers, B. F., Huang, B., & Shu, X. (2014). Refining laboratory procedure for artificial RAP: A comparative study. Construction and Building Materials, 52, 385–390. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.11.003
- Cao, X., Wang, H., Cao, X., Sun, W., Zhu, H., & Tang, B. (2018). Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil. Construction and Building Materials, 180, 455–463. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.06.001
- Cao, W., Wang, Y., & Wang, C. (2019). Fatigue characterization of bio-modified asphalt binders under various laboratory aging conditions. Construction and Building Materials, 208, 686–696. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.069
- Cavalli, M. C., Zaumanis, M., Mazza, E., Partl, M. N., & Poulikakos, L. D. (2018). Effect of ageing on the mechanical and chemical properties of binder from RAP treated with bio-based rejuvenators. Composites Part B: Engineering, 141, 174–181. https://doi.org/https://doi.org/10.1016/j.compositesb.2017.12.060
- Chen, J.-S., Lee, C.-T., & Lin, Y.-Y. (2018). Characterization of a recycling agent for restoring aged bitumen. Journal of Materials in Civil Engineering, 30(8), 05018003. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002388
- Dony, A., Ziyani, L., Drouadaine, I., Pouget, S., Faucon-Dumont, S., Simard, D., Mouillet, V., Poirier, J., Gabet, T., & Boulange, L. (2016, 1–3 June). MURE national project: FTIR spectroscopy study to assess ageing of asphalt mixtures. Paper presented at the proceedings of the E&E congress.
- Elkashef, M., Jones, D., Jiao, L., Williams, R. C., & Harvey, J. (2019). Using thermal analytical techniques to study rejuvenators and rejuvenated reclaimed asphalt pavement (RAP) binders. Energy & Fuels, 33(4), 2651–2658. https://doi.org/https://doi.org/10.1021/acs.energyfuels.8b03427
- Figueroa, A. S., Velasquez, R., Reyes, F. A., & Bahia, H. (2013). Effect of water conditioning for extended periods on the properties of asphalt binders. Transportation Research Record: Journal of the Transportation Research Board, 2372(1), 34–45. https://doi.org/https://doi.org/10.3141/2372-05
- Fini, E., Rajib, A. I., Oldham, D. J., Samieadel, A., & Hosseinnezhad, S. (2020). Role of chemical structure and composition of recycling agents on their interactions with oxidized asphaltene molecules. Journal of Materials in Civil Engineering, 32(9), Article 04020268. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0003352
- Fini, E., Samieadel, A., & Rajib, A. I. (2020). Moisture damage and its relation to surface adsorption/desorption of rejuvenators. Industrial and Engineering Chemistry Research, 59(30), 13414–13419. https://doi.org/https://doi.org/10.1021/acs.iecr.0c02534
- Haghshenas, H., Nabizadeh, H., Kim, Y.-R., & Santosh, K. (2016). Research on high-rap asphalt mixtures with rejuvenators and WMA additives.
- Hung, A. M., & Fini, E. H. (2019). Absorption spectroscopy to determine the extent and mechanisms of aging in bitumen and asphaltenes. Fuel, 242, 408–415. https://doi.org/https://doi.org/10.1016/j.fuel.2019.01.085
- Hung, A. M., Goodwin, A., & Fini, E. H. (2017). Effects of water exposure on bitumen surface microstructure. Construction and Building Materials, 135, 682–688. doi: https://doi.org/10.1016/j.conbuildmat.2017.01.002
- Kriz, P., Stastna, J., & Zanzotto, L. (2008). Glass transition and phase stability in asphalt binders. Road Materials and Pavement Design, 9(Suppl. 1), 37–65. https://doi.org/https://doi.org/10.1080/14680629.2008.9690158
- Li, D. D., & Greenfield, M. L. (2014). Chemical compositions of improved model asphalt systems for molecular simulations. Fuel, 115, 347–356. https://doi.org/https://doi.org/10.1016/j.fuel.2013.07.012
- Loeber, L., Muller, G., Morel, J., & Sutton, O. (1998). Bitumen in colloid science: A chemical, structural and rheological approach. Fuel, 77(13), 1443–1450. https://doi.org/https://doi.org/10.1016/S0016-2361(98)00054-4
- Lu, X., & Isacsson, U. (2002). Effect of ageing on bitumen chemistry and rheology. Construction and Building Materials, 16(1), 15–22. https://doi.org/https://doi.org/10.1016/S0950-0618(01)00033-2
- Mirhosseini, A. F., Kavussi, A., Tahami, S. A., & Dessouky, S. (2018). Characterizing temperature performance of bio-modified binders containing RAP binder. Journal of Materials in Civil Engineering, 30(8), 04018176. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002373
- Morgan, T., Alvarez-Rodriguez, P., George, A., Herod, A., & Kandiyoti, R. (2010). Characterization of Maya crude oil maltenes and asphaltenes in terms of structural parameters calculated from nuclear magnetic resonance (NMR) spectroscopy and laser desorption− mass spectroscopy (LD− MS). Energy & Fuels, 24(7), 3977–3989. https://doi.org/https://doi.org/10.1021/ef100320t
- Mousavi, M., Pahlavan, F., Oldham, D., Hosseinnezhad, S., & Fini, E. H. (2016). Multiscale investigation of oxidative aging in biomodified asphalt binder. The Journal of Physical Chemistry C, 120(31), 17224–17233. https://doi.org/https://doi.org/10.1021/acs.jpcc.6b05004
- Nayak, P., & Sahoo, U. C. (2017). Rheological, chemical and thermal investigations on an aged binder rejuvenated with two non-edible oils. Road Materials and Pavement Design, 18(3), 612–629. https://doi.org/https://doi.org/10.1080/14680629.2016.1182058
- Noureldin, A. S., & Wood, L. E. (1989). Variations in molecular size distribution of virgin and recycled asphalt binders associated with aging. Transportation Research Record, 1989(1228), 191–197.
- Oldham, D., Hung, A., Parast, M., Fini, E. H. (2018). Investigating bitumen rejuvenation mechanisms using a coupled rheometry-morphology characterization approach. Construction and Building Materials, 159, 37–45. doi: https://doi.org/10.1016/j.conbuildmat.2017.10.113
- Oldham, D., Qu, X., Wang, H., & Fini, E. H. (2020). Investigating change of polydispersity and rheology of crude oil and bitumen due to asphaltene oxidation. Energy & Fuels, 34(8), 10299–10305. https://doi.org/https://doi.org/10.1021/acs.energyfuels.0c01344
- Oldham, D. J., Rajib, A. I., Onochie, A., & Fini, E. H. (2019). Durability of bio-modified recycled asphalt shingles exposed to oxidation aging and extended sub-zero conditioning. Construction and Building Materials, 208, 543–553. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.017
- Pahlavan, F., Hosseinnezhad, S., Samieadel, A., Hung, A., & Fini, E. H. (2019). Fused aromatics to restore molecular packing of aged bituminous materials. Industrial and Engineering Chemistry Research, 58(27), 11939–11953. https://doi.org/https://doi.org/10.1021/acs.iecr.9b01397
- Pahlavan, F., Hung, A., & Fini, E. H. (2018). Evolution of molecular packing and rheology in asphalt binder during rejuvenation. Fuel, 222, 457–464. doi: https://doi.org/10.1016/j.fuel.2018.02.184
- Puello, J., Afanasjeva, N., & Alvarez, M. (2013). Thermal properties and chemical composition of bituminous materials exposed to accelerated ageing. Road Materials and Pavement Design, 14(2), 278–288. https://doi.org/https://doi.org/10.1080/14680629.2013.785799
- Qin, Q., Schabron, J. F., Boysen, R. B., & Farrar, M. J. (2014). Field aging effect on chemistry and rheology of asphalt binders and rheological predictions for field aging. Fuel, 121, 86–94. https://doi.org/https://doi.org/10.1016/j.fuel.2013.12.040
- Rajib, A. I., Pahlavan, F., & Fini, E. H. (2020). Investigating molecular-level factors that affect the durability of restored aged asphalt binder. Journal of Cleaner Production, 270, 122501. https://doi.org/https://doi.org/10.1016/j.jclepro.2020.122501
- Rice, J. R. (1968). A path independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics, 35(2), 379–386. https://doi.org/https://doi.org/10.1115/1.3601206
- Samieadel, A., Høgsaa, B., & Fini, E. H. (2018). Examining the implications of wax-based additives on the sustainability of construction practices: Multiscale characterization of wax-doped aged asphalt binder. ACS Sustainable Chemistry & Engineering, 7(3), 2943–2954. https://doi.org/https://doi.org/10.1021/acssuschemeng.8b03842
- Samieadel, A., Høgsaa, B., & Fini, E. H. (2019). Investigation of thermo-mechanical characteristics of wax-doped aged asphalt binder.
- Shen, J., Amirkhanian, S. N., & Lee, S.-J. (2007). HP-GPC characterization of rejuvenated aged CRM binders. Journal of Materials in Civil Engineering, 19(6), 515–522. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2007)19:6(515)
- Shen, J., Amirkhanian, S., & Tang, B. (2007). Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures. Construction and Building Materials, 21(5), 958–964. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2006.03.006
- Stempihar, J., & Kaloush, K. (2017). A notched disk crack propagation test for asphalt concrete. MOJ Civil Eng, 3(5), 376–384. https://doi.org/https://doi.org/10.15406/mojce.2017.03.00084
- Sun, H., Mumby, S. J., Maple, J. R., & Hagler, A. T. (1994). An ab initio CFF93 all-atom force field for polycarbonates. Journal of the American Chemical Society, 116(7), 2978–2987. https://doi.org/https://doi.org/10.1021/ja00086a030
- Tran, N. H., Taylor, A., & Willis, R. (2012). Effect of rejuvenator on performance properties of HMA mixtures with high RAP and RAS contents (NCAT report, 12-05).
- Ungerer, P., Rigby, D., Leblanc, B., & Yiannourakou, M. (2014). Sensitivity of the aggregation behaviour of asphaltenes to molecular weight and structure using molecular dynamics. Molecular Simulation, 40(1-3), 115–122. https://doi.org/https://doi.org/10.1080/08927022.2013.850499
- Waldman, M., & Hagler, A. T. (1993). New combining rules for rare gas van der Waals parameters. Journal of Computational Chemistry, 14(9), 1077–1084. https://doi.org/https://doi.org/10.1002/jcc.540140909
- West, R. C., Willis, J. R., & Marasteanu, M. O. (2013). Improved mix design, evaluation, and materials management practices for hot mix asphalt with high reclaimed asphalt pavement content (Vol. 752). Transportation Research Board.
- Wiehe, I. A. (2008). Process chemistry of petroleum macromolecules. CRC press.
- Yaseen, S., & Mansoori, G. A. (2018). Asphaltene aggregation due to waterflooding (A molecular dynamics study). Journal of Petroleum Science and Engineering, 170, 177–183. https://doi.org/https://doi.org/10.1016/j.petrol.2018.06.043
- Zadshir, M., Hosseinnezhad, S., & Fini, E. H. (2019). Deagglomeration of asphaltene nano-aggregates as a measure of true rejuvenation. Construction and Building Materials. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.090
- Zaumanis, M., & Mallick, R. B. (2015). Review of very high-content reclaimed asphalt use in plant-produced pavements: State of the art. International Journal of Pavement Engineering, 16(1), 39–55. https://doi.org/https://doi.org/10.1080/10298436.2014.893331
- Zhang, R., You, Z., Wang, H., Chen, X., Si, C., & Peng, C. (2018). Using bio-based rejuvenator derived from waste wood to recycle old asphalt. Construction and Building Materials, 189, 568–575. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.08.201
- Zhang, R., You, Z., Wang, H., Ye, M., Yap, Y. K., & Si, C. (2019). The impact of bio-oil as rejuvenator for aged asphalt binder. Construction and Building Materials, 196, 134–143. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.10.168
- Zhu, H., Xu, G., Gong, M., & Yang, J. (2017). Recycling long-term-aged asphalts using bio-binder/plasticizer-based rejuvenator. Construction and Building Materials, 147, 117–129. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.04.066