References
- AASHTO T 245. (2000). Standard test of method for resistance to plastic flow of bituminous mixtures using Marshall apparatus. American Association of State Highway and Transportation Officials.
- Aburkaba, E., Muniandy, R., Yunus, R., Hamid, H., & Salihudin, H. (2012). Influence of mineral filler particle size and type on rheological and performance properties of SMA asphalt-filler mastics. Asian Journal of Applied Sciences, 5(8), 522–537. https://doi.org/https://doi.org/10.3923/ajaps.2012.522.537
- Abutalib, N., Fini, E. H., Aflaki, S., & Abu-Lebdeh, T. M. (2015). Investigating effects of application of silica fume to reduce asphalt oxidative aging. American Journal of Engineering and Applied Sciences, 8(1), 176–184. https://doi.org/https://doi.org/10.3844/ajeassp.2015.176.184
- Airey, G. D., Liao, M. C., & Thom, N. H. (2006, August 12–17). Fatigue behaviour of bitumen-filler mastics. 10th International Conference On asphalt Pavements, Quebec City, Canada.
- Akter, R. (2018). Influence of rice husk ash and slags as fillers in asphalt concrete mixes. American Journal of Engineering Research (AJER), 6(1), 303–311.
- Al-Hdabi, A. (2016). Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler. Construction and Building Materials, 126, 544–551. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.09.070
- Al-Hdabi, A., & Al Nageim, H. (2017). Improving asphalt emulsion mixtures properties containing cementitious filler by adding GGBS. Journal of Materials in Civil Engineering, 29(5), 04016297. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001859
- AL-Saffar, N. A. (2013). The effect of filler type and content on hot asphalt concrete mixtures properties. AL Rafdain Engineering Journal, 21(6), 88–100. https://doi.org/https://doi.org/10.33899/rengj.2013.82394
- Ali, A. M. (2018) Effect of type and percentage of unconventional mineral fillers on the performance of hot mixed asphalt.
- Alvarez, A. E., Ovalles, E., & Caro, S. (2012). Assessment of the effect of mineral filler on asphalt–aggregate interfaces based on thermodynamic properties. Construction and Building Materials, 28(1), 599–606. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2011.08.089
- Anderson, D. A. (1987). Guidelines on use of baghouse fines. Information Services 101, National Asphalt Pavement Association.
- Anderson, D. A., & Goetz, W. H. (1973, February 12–14). Mechanical behavior and reinforcement of mineral filler-asphalt mixtures, Association of Asphalt Paving Technologists Proc, Houston, TX (pp. 37–66).
- Arabani, M., Babamohammadi, S., & Azarhoosh, A. R. (2014). Experimental investigation of seashells used as filler in hot mix asphalt. International Journal of Pavement Engineering, 16(6), 502–509. https://doi.org/https://doi.org/10.1080/10298436.2014.943132
- ASTM D242. (2000). Standard specification for mineral filler for bituminous paving mixtures. ASTM International.
- Aziz, K., Fadhil, T., & Ahmed, A. (2019). Influence of using white cement kiln dust as mineral filler on hot asphalt concrete mixture properties. International Journal of Civil Engineering and Technology, 4, 87–96.
- Bahia, H., Anderson, D., & Christensen, D. (1992). The bending beam rheometer: A simple device for measuring low temperature rheology of asphalt binders (with discussion). Journal of the Association of Asphalt Paving Technologists, 61, 117–153.
- Bahia, H., Hanson, D., Zeng, M., Zhai, H., Khatri, M., & Anderson, M. (2000). A project NCHRP 9-10 superpave protocols for modified asphalt binders, draft topical report (Task 9), Prepared for National Cooperative Highway Research Program, Transportation Research Board.
- Bahia, H. U., Hanson, D. I., Zeng, M., Zhai, H., Khatri, M. A., & Anderson, R. M. (2001). Characterization of modified asphalt binders in superpave mix design.
- Bahia, H. U., Zhai, H., Zeng, M., Hu, Y., & Turner, P. (2001). Development of binder specification parameters based on characterization of damage behavior (with discussion). Journal of the Association of Asphalt Paving Technologists, 70, 442–470.
- Barra, B., Momm, L., Guerrero, Y., & Bernucci, L. (2014). Characterization of granite and limestone powders for use as fillers in bituminous mastics dosage. Anais da Academia Brasileira de Ciências, 86(2), 995–1002. https://doi.org/https://doi.org/10.1590/0001-3765201420130165
- Bautista, E. G., Flickinger, J., Saha, R., Flores-Vivian, I., Faheem, A. F., & Sobolev, K. (2015). Effect of coal combustion products on high temperature performance of asphalt mastics. Construction and Building Materials, 94, 572–578. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.07.022
- Brown, E. R., Haddock, J. E., & Crawford, C. (1996). Investigation of stone matrix asphalt mortars. Transportation Research Record, 1530(1), 95–102. https://doi.org/https://doi.org/10.1177/0361198196153000112
- Brown, E. R., Haddock, J. E., Mallick, R. B., & Lynn, T. A. (1997). Development of a mixture design procedure for stone matrix asphalt (SMA). Asphalt Content, 66, 1–30.
- Brunauer, S., Emmett, P. H., & Teller, E. (1938). Adsorption of gases in multimolecular layers. Journal of the American Chemical Society, 60(2), 309–319. https://doi.org/https://doi.org/10.1021/ja01269a023
- B.S. Institution. (1975). BS 812 methods for sampling and testing of mineral aggregates, sands and fillers. Part 3 Mechanical Properties.
- Buannic, M., Di Benedetto, H., Ruot, C., Gallet, T., & Sauzéat, C. (2012). Fatigue investigation of mastics and bitumens using annular shear rheometer prototype equipped with wave propagation system. In A. Scarpas, N. Kringos, I. Al-Qadi, & L. A (Eds.), 7th RILEM International Conference on cracking in Pavements (pp. 805–814). Springer.
- Budiarto, A. (2017, December 13–14). The accuracy of filler detection at each aggregate fraction through wet sieve analysis system to reduce the risk on wearing course of asphalt mixture. AIP Conference Proceedings, AIP Publishing, p. 060007.
- Cao, L. (2013). Experiment research of filler-bitumen ratio impact on asphalt mixture performance. Applied Mechanics and Materials, Trans Tech Publ, 361-363, 1851–1856.
- Cardone, F., Frigio, F., Ferrotti, G., & Canestrari, F. (2015). Influence of mineral fillers on the rheological response of polymer-modified bitumens and mastics. Journal of Traffic and Transportation Engineering (English Edition), 2(6), 373–381. https://doi.org/https://doi.org/10.1016/j.jtte.2015.06.003
- Chen, Z. (2010) Research on performance of volcanic ash asphalt mastic Harbin Institute of Technology.
- Chen, M., Javilla, B., Wei, H., Cahngluan, P., Riara, M., Mo, L., & Guo, M. (2019). Rheological and interaction analysis of asphalt binder, mastic and mortar. Materials, 12(1), 128. https://doi.org/https://doi.org/10.3390/ma12010128
- Chen, M., Lin, J., Wu, S., & Liu, C. (2011). Utilization of recycled brick powder as alternative filler in asphalt mixture. Construction and Building Materials, 25(4), 1532–1536. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2010.08.005
- Chen, M., Lin, J., & Wu, S. (2011). Potential of recycled fine aggregates powder as filler in asphalt mixture. Construction and Building Materials, 25(10), 3909–3914. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2011.04.022
- Chen, J.-S., & Peng, C.-H. (1998). Analyses of tensile failure properties of asphalt-mineral filler mastics. Journal of Materials in Civil Engineering, 10(4), 256–262. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(1998)10:4(256)
- Chen, X. L., Sun, Y. S., Han, Y. X., & Zhang, B. (2010). The Research on the performance of asphalt mastics modified by mineral fillers. Advanced Materials Research, 158, 287–297. https://doi.org/https://doi.org/10.4028/www.scientific.net/AMR.158.287
- Chen, M., Zheng, J., Li, F., Wu, S., Lin, J., & Wan, L. (2015). Thermal performances of asphalt mixtures using recycled tyre rubber as mineral filler. Road Materials and Pavement Design, 16(2), 379–391. https://doi.org/https://doi.org/10.1080/14680629.2014.1002524
- Cheng, Y., Tao, J., Jiao, Y., Guo, Q., & Li, C. (2015). Influence of diatomite and mineral powder on thermal oxidative ageing properties of asphalt. Advances in Materials Science and Engineering, 2015, 1–10. https://doi.org/https://doi.org/10.1155/2015/947834
- Cheng, Y., Tao, J., Jiao, Y., Tan, G., Guo, Q., Wang, S., & Ni, P. (2016). Influence of the properties of filler on high and medium temperature performances of asphalt mastic. Construction & Building Materials, 118, 268–275. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.05.041
- Choi, M., Kim, Y., Kim, H., & Lee, J. (2020). Performance evaluation of the use of tire-derived fuel fly ash as mineral filler in hot mix asphalt concrete. Journal of Traffic and Transportation Engineering (English Edition), 7(2), 249–258. https://doi.org/https://doi.org/10.1016/j.jtte.2019.05.004
- Choudhary, J., Kumar, B., & Gupta, A. (2018). Application of waste materials as fillers in bituminous mixes. Waste Management, 78, 417–425. https://doi.org/https://doi.org/10.1016/j.wasman.2018.06.009
- Chun, S., Roque, R., & Zou, J. (2012). Effect of gradation characteristics on performance of superpave mixtures in the field. Transportation Research Record, 2294(1), 43–52. https://doi.org/https://doi.org/10.3141/2294-05
- Cong, P., Chen, S., & Chen, H. (2012). Effects of diatomite on the properties of asphalt binder. Construction & Building Materials, 30, 495–499. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2011.11.011
- Dan, L., Zheng, C., Qin, Y., Bi, H., Keyao, L., & Junfei, H. (2014). Analysing the effects of the mesoscopic characteristics of mineral powder fillers on the cohesive strength of asphalt mortars at low temperatures. Construction and Building Materials, 65, 330–337. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.04.123
- D'Angelo, J. A. (2009). The relationship of the MSCR test to rutting. Road Materials and Pavement Design, 10(sup1), 61–80. https://doi.org/https://doi.org/10.1080/14680629.2009.9690236
- D'Angelo, J., Kluttz, R., Dongre, R. N., Stephens, K., & Zanzotto, L. (2007). Revision of the Superpave high temperature binder specification: The multiple stress creep recovery test. Jounral of Association of Asphalt Paving Technologists, 76, 123–162.
- Das, A. K., & Singh, D. (2017). Investigation of rutting, fracture and thermal cracking behavior of asphalt mastic containing basalt and hydrated lime fillers. Construction and Building Materials, 141, 442–452. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.03.032
- Dehdezi, P. K., Thodesen, C., Encinas, C. C., & Mengede, M. (2013, June 25–27). Effects of fillers on the rheological/mechanical performance of mastics/asphalt mixes. Proceedings of the international conferences on the bearing capacity of roads, railways and airfields, pp. 721–733.
- Diab, A., & Enieb, M. (2018). Investigating influence of mineral filler at asphalt mixture and mastic scales. International Journal of Pavement Research and Technology, 11(3), 213–224. https://doi.org/https://doi.org/10.1016/j.ijprt.2017.10.008
- Diab, A., You, Z. P., Hossain, Z., & Zaman, M. (2014). Moisture susceptibility evaluation of nanosize hydrated lime-modified asphalt-aggregate systems based on surface free energy concept. Transportation Research Record, 2446(1), 52–59. https://doi.org/https://doi.org/10.3141/2446-06
- do Vale, A., Faxina, A., & Gutierrez Grecco, F. (2016). Effects of filler/bitumen ratio and bitumen grade on rutting and fatigue characteristics of bituminous mastics. 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic.
- Ekblad, J., Lundström, R., & Simonsen, E. (2013). Water susceptibility of asphalt mixtures as influenced by hydraulically active fillers. Materials and Structures, 48(4), 1135–1147. https://doi.org/https://doi.org/10.1617/s11527-013-0220-4
- EN 13043. (2013). Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. British Standards Institution.
- Erfen, Y., Tun, U., & Onn, H. (2015). The appropriateness of egg shell as filler in hot mix asphalt, 1(9).
- Evans, A. (1933). The relation of bitumen to fine mineral matter, 1st World Petroleum Congress, World Petroleum Congress.
- Faheem, A. F., Hintz, C., Bahia, H. U., Al-Qadi, I. L., & Glidden, S. (2012). Influence of filler fractional voids on mastic and mixture performance. Transportation Research Record, 2294(1), 74–80. https://doi.org/https://doi.org/10.3141/2294-08
- Faheem, A. F., Wen, H., Stephenson, L., & Bahia, H. U. (2008). Effect of mineral filler on damage resistance characteristics of asphalt binders. Journal of the Association of Asphalt Paving Technologists, 77, 885–907.
- Fan, Z., Wang, X., Zhang, Z., & Zhang, Y. (2019). Effects of cement–mineral filler on asphalt mixture performance under different aging procedures. Applied Sciences, 9(18), 3785. https://doi.org/https://doi.org/10.3390/app9183785
- Fan, L., Wei, J., Zhang, Y., & Wang, L. (2014). Active mechanism and performance of asphalt motar by minreal filler. Journal of Building Materials, 17(6), 1096–1101.
- Ferrigno, T. H. (1987). Principles of filler selection and use. Van Nostrand Reinhold.
- Géber, R., & Gömze, L. A. (2010). Characterization of mineral materials as asphalt fillers. Materials Science Forum, 659, 471–476. https://doi.org/https://doi.org/10.4028/www.scientific.net/MSF.659.471
- Geber, R., Simon, A., Kocserha, I., & Buzimov, A. (2017). Microstructural and rheological analysis of fillers and asphalt mastics. Journal of Physics: Conference Series, 790, 012009. https://doi.org/https://doi.org/10.1088/1742-6596/790/1/012009
- Gezencvej, L. B. (1985). Asphalt concrete for road surfaces. Transport, 343.
- Grabowski, W., & Wilanowicz, J. (2007). The structure of mineral fillers and their stiffening properties in filler-bitumen mastics. Materials and Structures, 41(4), 793–804. https://doi.org/https://doi.org/10.1617/s11527-007-9283-4
- Guo, M., Bhasin, A., & Tan, Y. (2017). Effect of mineral fillers adsorption on rheological and chemical properties of asphalt binder. Construction and Building Materials, 141, 152–159. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.02.051
- Guo, M., Tan, Y., Hou, Y., Wang, L., & Wang, Y. (2017). Improvement of evaluation indicator of interfacial interaction between asphalt binder and mineral fillers. Construction and Building Materials, 151, 236–245. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.05.003
- Guo, M., Tan, Y., Yu, J., Hou, Y., & Wang, L. (2017). A direct characterization of interfacial interaction between asphalt binder and mineral fillers by atomic force microscopy. Materials and Structures, 50(141), 1–11. https://doi.org/https://doi.org/10.1617/s11527-017-1015-9
- Gürer, C., & Selman, G. Ş. (2017). Investigation of properties of asphalt concrete containing boron waste as mineral filler. Materials Science, 22(1). https://doi.org/https://doi.org/10.5755/j01.ms.22.1.12596
- Han, R. (2011). Improvement to a transport model of asphalt binder oxidation in pavements: Pavement temperature modeling, oxygen diffusivity in asphalt binders and mastics, and pavement air void characterization. Texas A&M University.
- Harris, B. M., & Stuart, K. D. (1995). Analysis of mineral fillers and mastics used in stone matrix asphalt. Journal of the Association of Asphalt Paving Technologists, 64, 54–95.
- He, Z., & Huang, M. (2015, September 26–27). Study of mineral powder effects on the performance of an asphalt rubber mixture. International Conference on Transportation Engineering.
- Heitzman, M. A. (2005). Development of new film thickness models for hot mix asphalt. Iowa State University.
- Hesami, E., Bidewell, N., Birgisson, B., & Kringos, N. (2013). Evaluation of environmental susceptibility of bituminous mastic viscosity as a function of mineral and biomass fillers. Transportation Research Record, 2371(1), 23–31. https://doi.org/https://doi.org/10.3141/2371-03
- Hesami, E., Birgisson, B., & Kringos, N. (2014a). A new protocol for measuring bituminous mastic viscosity as a function of its filler concentration. Road Materials and Pavement Design, 15(2), 420–433. https://doi.org/https://doi.org/10.1080/14680629.2013.876926
- Hesami, E., Birgisson, B., & Kringos, N. (2014b). Numerical and experimental evaluation of the influence of the filler–bitumen interface in mastics. Materials and Structures, 47(8), 1325–1337. https://doi.org/https://doi.org/10.1617/s11527-013-0237-8
- Hesami, E., Jelagin, D., Kringos, N., & Birgisson, B. (2012). An empirical framework for determining asphalt mastic viscosity as a function of mineral filler concentration. Construction and Building Materials, 35, 23–29. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2012.02.093
- Hospodka, M., Hofko, B., & Blab, R. (2018). Introducing a new specimen shape to assess the fatigue performance of asphalt mastic by dynamic shear rheometer testing. Materials and Structures, 51(2), 46. https://doi.org/https://doi.org/10.1617/s11527-018-1171-6
- Hu, X., Ning, W., Pan, P., & Tao, B. (2017). Performance evaluation of asphalt mixture using brake pad waste as mineral filler. Construction & Building Materials, 138, 410–417. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.02.031
- Huang, B., Shu, X., & Chen, X. (2007). Effects of mineral fillers on hot-mix asphalt laboratory-measured properties. International Journal of Pavement Engineering, 8(1), 1–9. https://doi.org/https://doi.org/10.1080/10298430600819170
- Jäger, A., Lackner, R., Eisenmenger-Sittner, C., & Blab, R. (2004). Identification of four material phases in bitumen by atomic force microscopy. Road Materials and Pavement Design, 5(sup1), 9–24. https://doi.org/https://doi.org/10.1080/14680629.2004.9689985
- Ji, L., Li, Y., Sun, W., Guo, M., & Yuan, P. (2014). Controlling dosage, fineness and density index of mineral filler in asphalt mixture. Journal of Highway And Transportation Research and Dvelopment, 31((08|8)), 25–29+52.
- Jony, H. H., Jahad, I. Y., & Al-Rubaie, M. F. (2011). The effect of using glass powder filler on hot asphalt concrete mixtures properties. Engineering and Technology Journal, 29(1), 44–57.
- Kai, C., Wenyuan, X., Dan, C., & Huimin, F. (2018). High-and low-temperature properties and thermal stability of silica fume/SBS composite-modified asphalt mortar. Advances in Materials Science and Engineering, 2018, 1–8. https://doi.org/https://doi.org/10.1155/2018/1317436
- Kallas, B., & Puzinauskas, V. (1961). A study of mineral fillers in asphalt paving mixtures. Journal of the Association of Asphalt Paving Technologists, 10, 493–528.
- Kandhal, P. S. (1981, February 16–18). Association of asphalt paving Technologists Proceedings. Evaluation of baghouse fines In bituminous paving mixtures (with discussion).
- Kandhal, P. S., & Lynn, C. Y. (1998). Characterization tests for mineral fillers related to performance of asphalt paving mixtures. Transportation Research Record, 1638(1), 101–110. https://doi.org/https://doi.org/10.3141/1638-12
- Kandhal, P. S., & Parker Jr., F. (1998). Aggregate tests related to asphalt concrete performance in pavements.
- Kar, D., Panda, M., & Giri, J. P. (2014). Influence of fly-ash as a filler in bituminous mixes. ARPN Journal of Engineering and Applied Sciences, 9(6), 895–900.
- Kavussi, A., & Hicks, R. G. (1997). Properties of bituminous mixtures containing different fillers. Journal of the Association of Asphalt Paving Technologists, 66, 153–186.
- Kim, Y. R., & Lee, H. J. (2003). Evaluation of the effect of aging on mechanical and fatigue properties of sand asphalt mixtures. KSCE Journal of Civil Engineering, 7(4), 389–398. https://doi.org/https://doi.org/10.1007/BF02895837
- Kim, Y. R., Little, D. N., & Song, I. (2003). Effect of mineral fillers on fatigue resistance and fundamental material characteristics: Mechanistic evaluation. Transportation Research Record, 1832(1), 1–8. https://doi.org/https://doi.org/10.3141/1832-01
- Kiruthiha, K., Loshini, G., Thivya, M., & Kumar, V. (2015). Strengthening of flexible pavement using egg shell as a filler. International Journal of Engineering Trends and Technology (IJETT), 21(10), 483–486. https://doi.org/https://doi.org/10.14445/22315381/IJETT-V21P294
- Kollaros, G., Kalaitzaki, E., & Athanasopoulou, A. (2017). Using hydrated lime in hot mix asphalt mixtures in road construction. American Journal of Engineering Research (AJER, 6(7), 261–266.
- Kuity, A., & Das, A. (2015). Homogeneity of filler distribution within asphalt mix–A microscopic study. Construction and Building Materials, 95, 497–505. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.07.043
- Kuity, A., Jayaprakasan, S., & Das, A. (2014). Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixture. Construction and Building Materials, 68, 637–643. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.07.012
- Kumar, P., Mehndiratta, H., & Singh, V. (2008). Use of fly ash in bituminous layer of pavement. Indian Highways, 8, 41–50.
- Kütük-Sert, T., & Kütük, S. (2012). Physical and marshall properties of borogypsum used as filler aggregate in asphalt concrete. Journal of Materials in Civil Engineering, 25(2), 266–273. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000580
- Lackner, R., Spiegl, M., Blab, R., & Eberhardsteiner, J. (2005). Is low-temperature creep of asphalt mastic independent of filler shape and mineralogy?—arguments from multiscale analysis. Journal of Materials in Civil Engineering, 17(5), 485–491. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(485)
- Lange, F. (1970). The interaction of a crack front with a second-phase dispersion. Philosophical Magazine, 22(179), 0983–0992. https://doi.org/https://doi.org/10.1080/14786437008221068
- Lebedev, M. S., & Chulkova, I. L. (2017, July 27–29). Study of structure formation in bitumen-mineral compositions based on fly ash under water saturation. International Conference “actual issues of mechanical Engineering” 2017 (AIME 2017).
- Lee, D. (1964). The effect of filler on asphalt cement mastics. Iowa State University.
- Lerfald, B. O., & Horvli, I. (2003). The influence of filler materials on rheology and ageing of filler-bitumen-mixes. Road Materials and Pavement Design, 4(4), 455–469. https://doi.org/https://doi.org/10.1080/14680629.2003.9689959
- Lesueur, D., & Little, D. N. (1999). Effect of hydrated lime on rheology, fracture, and aging of bitumen. Transportation Research Record, 1661(1), 93–105. https://doi.org/https://doi.org/10.3141/1661-14
- Lesueur, D., Petit, J., & Ritter, H. J. (2013). The mechanisms of hydrated lime modification of asphalt mixtures: A state-of-the-art review. Road Materials and Pavement Design, 14(1), 1–16. https://doi.org/https://doi.org/10.1080/14680629.2012.743669
- Lesueur, D., Teixeira, A., Lázaro, M. M., Andaluz, D., & Ruiz, A. (2016). A simple test method in order to assess the effect of mineral fillers on bitumen ageing. Construction and Building Materials, 117, 182–189. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.05.003
- Li, C., Chen, Z., Wu, S., Li, B., Xie, J., & Xiao, Y. (2017). Effects of steel slag fillers on the rheological properties of asphalt mastic. Construction and Building Materials, 145, 383–391. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.04.034
- Li, T., & Hu, H. (2013). Influence of mineral filler on properties of asphalt motar. Journal of Hefei University of Technology, 36((08|8)), 983–987.
- Li, X. M., Nan, X. L., & Wei, D. B. (2012). High temperature rheology property of asphalt mastic with different mineral filler. Advanced Materials Research, 450, 527–531.
- Li, Q., Xu, H., Fu, X., Chen, C., & Zhai, J. (2009). Effects of circulating fluidized bed combustion (CFBC) fly ashes as filler on the performances of asphalt. Asia-Pacific Journal of Chemical Engineering, 4(2), 226–235. https://doi.org/https://doi.org/10.1002/apj.267
- Liao, M., Chen, J., & Tsou, K. (2011). Fatigue characteristics of bitumen-filler mastics and asphalt mixtures. Journal of Materials in Civil Engineering, 24(7), 916–923. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000450
- Little, D. N., & Petersen, J. C. (2005). Unique effects of hydrated lime filler on the performance-related properties of asphalt cements: Physical and chemical interactions revisited. Journal of Materials in Civil Engineering, 17(2), 207–218. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2005)17:2(207)
- Liu, H., Li, X. M., Zhang, X. N., & Tan, Y. Q. (2009). Compared rheology of asphatlt mastics performance with hydrated lime and limestone filler. Beijing Gongye Daxue Xuebao / Journal of Beijing University of Technology, 35, 1506–1511.
- Liu, X., Liu, W., Wang, S., Wang, Z., & Shao, L. (2018). Performance evaluation of asphalt mixture with nanosized volcanic ash filler, Journal of Transportation Engineering. Part B: Pavements, 144(3), 04018028. https://doi.org/https://doi.org/10.1061/JPEODX.0000060
- Liu, X., Wu, S., Ye, Q., Qiu, J., & Li, B. (2018). Properties evaluation of asphalt-based composites with graphite and mine powders. Construction and Building Materials, 22(3), 121–126. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2006.10.004
- Liu, Z., Yang, X., Wang, Y., & Luo, S. (2019). Engineering properties and microwave heating induced ice-melting performance of asphalt mixture with activated carbon powder filler. Construction and Building Materials, 197, 50–62. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.11.094
- Masued, G. G. (2019, March 6–7). Investigating the ability of using eggshell powder as a filler in hot mix asphalt mixture. IOP Conference series: Materials Science and Engineering, IOP Publishing, p. 022047.
- Mazzoni, G., Stimilli, A., Cardone, F., & Canestrari, F. (2017). Fatigue, self-healing and thixotropy of bituminous mastics including aged modified bitumens and different filler contents. Construction and Building Materials, 131, 496–502. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.11.093
- Mehari, Z. B. (2007). Effect of different types of filler materials on characteristics of hot-mix-asphalt concrete [Master Thesis Submitted to School of Graduate Studies of Addis Ababa University].
- Melotti, R., Santagata, E., Bassani, M., Salvo, M., & Rizzo, S. (2013). A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures. Waste Management, 33(9), 1906–1917. https://doi.org/https://doi.org/10.1016/j.wasman.2013.05.015
- Mistry, R., Karmakar, S., & Roy, T. K. (2019). Experimental evaluation of rice husk ash and fly ash as alternative fillers in hot-mix asphalt. Road Materials and Pavement Design, 20(4), 979–990. https://doi.org/https://doi.org/10.1080/14680629.2017.1422791
- Mistry, R., & Roy, T. K. (2016). Effect of using fly ash as alternative filler in hot mix asphalt. Perspectives in Science, 8, 307–309. https://doi.org/https://doi.org/10.1016/j.pisc.2016.04.061
- Mo, L., Huurman, M., Wu, S., & Molenaar, A. (2012). Research of bituminous mortar fatigue test method based on dynamic shear rheometer. Journal of Testing and Evaluation, 40(1), 84–90. https://doi.org/https://doi.org/10.1520/JTE103738
- Mogawer, W. S., & Stuart, K. D. (1996). Effects of mineral fillers on properties of stone matrix asphalt mixtures. Transportation Research Record, 1530(1), 86–94. https://doi.org/https://doi.org/10.1177/0361198196153000111
- Mohammad, L. N., Abadie, C., Gokmen, R., & Puppala, A. J. (2000). Mechanistic evaluation of hydrated lime in hot-mix asphalt mixtures. Transportation Research Record, 1723(1), 26–36. https://doi.org/https://doi.org/10.3141/1723-04
- Mohammed, A. M., & Fadhil, A. T. (2018). Effect of filler type on the durability of asphalt concrete mixes.
- Montepara, A., Romeo, E., Isola, M., & Tebaldi, G. (2011). The role of fillers on cracking behavior of mastics and asphalt mixtures. Asphalt Paving Technology, 80, 161–192.
- Moon, K. H., Falchetto, A. C., Park, J. Y., & Jeong, J. H. (2014). Development of high performance asphalt mastic using fine taconite filler. KSCE Journal of Civil Engineering, 18(6), 1679–1687. https://doi.org/https://doi.org/10.1007/s12205-014-1207-6
- Moraes, R. (2014). Investigation of mineral filler effects on the aging process of asphalt mastics. Department of Civil & Environmental Engineering, The University of Wisconsin – Madison, p. 152.
- Moraes, R., & Bahia, H. (2015). Effect of mineral fillers on the oxidative aging of asphalt binders. Transportation Research Record: Journal of the Transportation Research Board, 2506(1), 19–31. https://doi.org/https://doi.org/10.3141/2506-03
- Moraes, R., & Bahia, H. U. (2015). Effect of mineral filler on changes in molecular size distribution of asphalts during oxidative ageing. Road Materials and Pavement Design, 16(sup2), 55–72. https://doi.org/https://doi.org/10.1080/14680629.2015.1076998
- Movilla-Quesada, D., Raposeiras, A. C., Muñoz, O., & Castro-Fresno, D. (2017). Reduction in the use of mineral aggregate by recycling cellulose ashes to decrease the aging of hot asphalt mixtures. Construction and Building Materials, 143, 547–557. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.03.154
- Muniandy, R., Aburkaba, E., & Mahdi, L. (2013). Effect of mineral filler type and particle size on asphalt-filler mastic and stone mastic asphalt laboratory measured properties. Australian Journal of Basic and Applied Sciences, 7(11), 475–787.
- Neubauer, O., & Partl, M. N. (2004). Impact of Binder Content on Selected Properties of Stone Mastic Asphalt, 3rd Eurasphalt and Eurobitume Congress, Vienna (pp. 1614–1621).
- Nie, X., Qian, G., & Ouyang, Y. (2014). Study on performance of phosphate slag powder asphalt based on shrp. Highway, 59(3), 145–151.
- O'Flaherty, C. (2015). Introduction: The location, design, construction and maintenance of road pavements (pp. 1–4).
- Pasandín, A. R., & Pérez, I. (2015). The influence of the mineral filler on the adhesion between aggregates and bitumen. International Journal of Adhesion and Adhesives, 58, 53–58. https://doi.org/https://doi.org/10.1016/j.ijadhadh.2015.01.005
- Pasetto, M., Baliello, A., Giacomello, G., & Pasquini, E. (2016). Rheological characterization of warm-modified asphalt mastics containing electric arc furnace steel slags. Advances in Materials Science and Engineering, 2016, 1–11. https://doi.org/https://doi.org/10.1155/2016/9535940
- Petersen, J. C., Plancher, H., & Harnsberger, P. M. (1987, February 23–25). Lime treatment of asphalt to reduce age hardening and improve flow properties. Proceedings of the Association asphalt paving Technologists, Association asphalt paving Technologists (AAPT), Lino Lakes, MN (pp. 632–653).
- Plancher, H., Green, E. L., & Petersen, J. C. (1976, February 16–18). Reduction of oxidative hardening of asphalts by treatment with hydrated lime – a mechanistic study. Proceedings of the Association asphalt paving Technologists, Association asphalt paving Technologists (AAPT), Lino Lakes, MN (pp. 1–24).
- Qian, G., Bai, S., Ju, S., & Huang, T. (2013). Laboratory evaluation on recycling waste phosphorus slag as the mineral filler in hot-mix asphalt. Journal of Materials in Civil Engineering, 25(7), 846–850. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000770
- Qin, Q., & Ye, J. (2015). Toughening mechanisms in composite materials. Woodhead Publishing.
- Qiu, H., Tan, X., Shi, S., & Zhang, H. (2013). Influence of filler–bitumen ratio on performance of modified asphalt mortar by additive. Journal of Modern Transportation, 21(1), 40–46. https://doi.org/https://doi.org/10.1007/s40534-013-0002-2
- Ramanathan, K., Stallings, R. L., & Newsome, J. R. (1991). An ultrasonic technique for the measurement of adhesion of asphalt to aggregate. Journal of Adhesion Science & Technology, 5(3), 181–190. https://doi.org/https://doi.org/10.1163/156856191X00134
- Rao, S. K., & Sen, B. R. (1973). Evaluation of mineral fillers for asphalt paving mixtures. Highway Research Record n°468, HRB, 100–108.
- Remisova, E. (2015). Study of mineral filler effect on asphalt mixtures properties, 6th Bituminous Mixtures & Pavements, Taylor & Francis Group, Thessaloniki, Greece( pp. 49–53).
- Ren, L. (2015). Study on modulus increasing effect of asphalt mortar by different kinds of mineral powder. Journal of Highway and Transportation Research and Development, 32((05|5)), 25–30+35.
- Reyes, O. J., & Rincón, J. R. (2009). Influence of characteristics of mineral filler in the resistance of asphalt mixture. Revista EIA, 11, 93–103.
- Riccardi, C., Falchetto, A. C., Wistuba, M., & Losa, M. (2017). Fatigue comparisons of mortars at different volume concentration of aggregate particles. International Journal of Fatigue, 104, 416–421. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2017.08.005
- Richardson, C. (1914). The modern asphalt pavement. Wiley.
- Richardson, C. (1915). The theory of the perfect sheet asphalt surface.
- Rigden, P. J. (1947). The use of fillers in bituminous road surfacings. A study of filler-binder systems in relation to filler characteristics. Journal of the Society of Chemical Industry, 66(9), 299–309. https://doi.org/https://doi.org/10.1002/jctb.5000660902
- Rodríguez, M. G., Morrison, G. R., vanLoon, J. R., & Hesp, S. A. (1996). Low-temperature failure in particulate-filled asphalt binders and asphalt concrete mixes. Journal of the Association of Asphalt Paving Technologists, 65, 159–192.
- Romeo, E., Ghizzardi, V., Rastelli, S., & Montepara, A. (2016). Influence of mineral fillers and their fractional voids on mastic rheological and mechanical properties, 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, Springer, Dordrecht (pp. 681–692).
- Romeo, E., Roncella, R., Rastelli, S., & Montepara, A. (2014, June 1–5). Mechanical influence of mineral fillers on asphalt mixture cracking behaviour. International Conference on asphalt Pavements, ISAP 2014, Raleigh, North Carolina, USA (pp. 903–911).
- Saleh, M. F. (2006). Effect of aggregate gradation, mineral fillers, bitumen grade, and source on mechanical properties of foamed bitumen-stabilized mixes. Transportation Research Record, 1952(1), 90–100. https://doi.org/https://doi.org/10.1177/0361198106195200110
- Saltan, M., Öksüz, B., & Uz, V. E. (2015). Use of glass waste as mineral filler in hot mix asphalt. Science and Engineering of Composite Materials, 22(3), 271–277. https://doi.org/https://doi.org/10.1515/secm-2013-0135
- Sangiorgi, C., Tataranni, P., Mazzotta, F., Simone, A., Vignali, V., & Lantieri, C. (2017). Alternative fillers for the production of bituminous mixtures: A screening investigation on waste powders. Coatings, 7(6), 76. https://doi.org/https://doi.org/10.3390/coatings7060076
- Sangiorgi, C., Tataranni, P., Simone, A., Vignali, V., Lantieri, C., & Dondi, G. (2016). Assessment of waste bleaching clay as alternative filler for the production of porous asphalts. Construction and Building Materials, 109, 1–7. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.01.052
- Sargın, Ş, Saltan, M., Morova, N., Serin, S., & Terzi, S. (2013). Evaluation of rice husk ash as filler in hot mix asphalt concrete. Construction and Building Materials, 48, 390–397. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.06.029
- Shao, X. Z., Tan, Y. Q., & Sun, L. J. (2005). Analysis on the relationship between several indexes of mineral filler and asphalt mortar. Journal of Highway and Transportation Research and Development, 22(2), 10–13.
- Sharma, V., Chandra, S., & Choudhary, R. (2010). Characterization of fly ash bituminous concrete mixes. Journal of Materials in Civil Engineering, 22(12), 1209–1216. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000125
- Shashidhar, N., Needham, S., Chollar, B., & Romero, P. (1999). Prediction of the performance of mineral fillers in stone matrix asphalt. Journal of the Association of Asphalt Paving Technologists, 68, 222–251.
- Shashidhar, N., & Romero, P. (1998). Factors affecting the stiffening potential of mineral fillers. Transportation Research Record, 1638(1), 94–100. https://doi.org/https://doi.org/10.3141/1638-11
- Sheng, Y., Zhang, B., Yan, Y., Chen, H., Xiong, R., & Geng, J. (2017). Effects of phosphorus slag powder and polyester fiber on performance characteristics of asphalt binders and resultant mixtures. Construction and Building Materials, 141, 289–295. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.02.141
- Shukry, N. A. M., Hassan, N. A., Abdullah, M. E., Hainin, M. R., Yusoff, N. I. M., Jaya, R. P., & Mohamed, A. (2018, March 1–2). Effect of various filler types on the properties of porous asphalt mixture. International Conference on Innovative Technology, Engineering and Sciences, IOP Publishing.
- Smith, B. J., & Hesp, S. A. (2000). Crack pinning in asphalt mastic and concrete: Regular fatigue studies. Transportation Research Record, 1728(1), 75–81. https://doi.org/https://doi.org/10.3141/1728-11
- Sobolev, K., Flores, I., Bohler, J. D., Faheem, A., & Covi, A. (2013, April 22–25). Application of fly ash in ASHphalt concrete: From challenges to opportunities. Proceedings of World of coal Ash Conference.
- Sobolev, K., Vivian, I. F., Saha, R., Wasiuddin, N. M., & Saltibus, N. E. (2014). The effect of fly ash on the rheological properties of bituminous materials. Fuel, 116, 471–477. https://doi.org/https://doi.org/10.1016/j.fuel.2013.07.123
- Song, Y., Che, J., & Zhang, Y. (2011). The interacting rule of diatomite and asphalt groups. Petroleum Science and Technology, 29(3), 254–259. https://doi.org/https://doi.org/10.1080/10916460902882768
- Sutradhar, D., Miah, M., Chowdhury, G. J., & Sobhan, M. A. (2015). Effect of using waste material as filler in bituminous mix design. American Journal of Civil Engineering, 3(3), 88–94. https://doi.org/https://doi.org/10.11648/j.ajce.20150303.16
- Tan, Y., & Guo, M. (2013). Interfacial thickness and interaction between asphalt and mineral fillers. Materials and Structures, 47(4), 605–614. https://doi.org/https://doi.org/10.1617/s11527-013-0083-8
- Tan, Y. Q., Li, Z. H., Zhang, X. Y., & Dong, Z. J. (2010). Research on high and low-temperature properties of asphalt-mineral filler mastic. Journal of Materials in Civil Engineering, 22(8), 811–819. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000015
- Tang, B., Wu, H., Liao, Y., & Huang, D. (2015, November 28–29). Effect of glass powder instead of mineral powder on asphalt mixture. International Conference on Civil Engineering & Transportation.
- Tao, G. Y., Xiao, Y., Yang, L. F., Cui, P. D., Kong, D. Z., & Xue, Y. J. (2019). Characteristics of steel slag filler and its influence on rheological properties of asphalt mortar. Construction and Building Materials, 201, 439–446. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.12.174
- Tapkin, S. (2008). Mechanical evaluation of asphalt-aggregate mixtures prepared with fly ash as a filler replacement. Canadian Journal of Civil Engineering, 35(1), 27–40. https://doi.org/https://doi.org/10.1139/L07-082
- Tarefder, R. A., Mannan, U. A., & Arifuzzaman, M. (2016). Evaluation of asphalt mastic containing mica due to aging. Proceedings of the Institution of Civil Engineers - Transport, 169(3), 173–182. https://doi.org/https://doi.org/10.1680/jtran.15.00013
- Tarrer, A., & Wagh, V. (1991). The effect of the physical and chemical characteristics of the aggregate on bonding. Strategic Highway Research Program, National Research Council.
- Tehrani, F., Absi, J., Allou, F., & Petit, C. (2016). Viscoelastic properties of bituminous composites using multiscale heterogeneous numerical simulation and micromechanical analytical self-consistent model. In A. Chabot, W. G. Buttlar, E. V. Dave, C. Petit, & G. Tebaldi (Eds.), 8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements (pp. 133–138). Springer.
- Tons, E., Goetz, R. O., & Razi, M. (1983). Fly ash as asphalt reducer in bituminous base courses. Department of Civil Engineering, College of Engineering, University of Michigan.
- Trautvain, A., Yadykina, V., Gridchin, A., & Pashkova, C. (2015). Evaluating the effectiveness of producing the activated mineral powders from technogenic raw materials for asphalt mixtures. Procedia Engineering, 117, 350–356. https://doi.org/https://doi.org/10.1016/j.proeng.2015.08.172
- Traxler, R. N., Baum, L. A. H., & Pittman, C. U. (1933). Experimental determination of void content of close-packed mineral powders. Industrial & Engineering Chemistry Analytical Edition, 5(3), 165–168. https://doi.org/https://doi.org/10.1021/ac50083a006
- Tunnicliff, D. G. (1962). A review of mineral filler. Journal of the Association of Asphalt Paving Technologists, 31, 118–150.
- Underwood, B. S. (2016). A continuum damage model for asphalt cement and asphalt mastic fatigue. International Journal of Fatigue, 82, 387–401. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2015.08.020
- Wang, H., Al-Qadi, I. L., Faheem, A. F., Bahia, H. U., Yang, S. H., & Reinke, G. H. (2011). Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record: Journal of the Transportation Research Board, 2208(1), 33–39. https://doi.org/https://doi.org/10.3141/2208-05
- Wang, J., Guo, M., & Tan, Y. (2018). Study on application of cement substituting mineral fillers in asphalt mixture. International Journal of Transportation Science and Technology, 7(3), 189–198. https://doi.org/https://doi.org/10.1016/j.ijtst.2018.06.002
- Wang, D., Linbing, W., Christian, D., & Zhou, G. (2012). Fatigue properties of asphalt materials at low in-service temperatures. Journal of Materials in Civil Engineering, 25(9), 1220–1227. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000694
- Wang, G., Qian, H., & Zhang, F. (2011, July 15–17). Fatigue performance of large stone asphalt mixtures for cement replacing mineral filler. 2011 Second International Conference on Mechanic Automation and Control Engineering. IEEE, pp. 5815–5818.
- Wang, M., Zhu, M., Wang, Y., & Gou, J. (2007). Effect of substitution of mineral powder by cement on asphalt mixture performance. Journal of Chongqing Jianzhu University, 29(6), 121–125.
- Wasilewska, M., Małaszkiewicz, D., & Ignatiuk, N. (2017). Evaluation of different mineral filler aggregates for asphalt mixtures. IOP Conference Series: Materials Science and Engineering, 245, 022042. https://doi.org/https://doi.org/10.1088/1757-899X/245/2/022042
- Wen, H., & Bahia, H. (2009). Characterizing fatigue of asphalt binders with viscoelastic continuum damage mechanics. Transportation Research Record, 2126(1), 55–62. https://doi.org/https://doi.org/10.3141/2126-07
- Wen, Y., Guo, N., You, Z., Wang, L., & Tan, Y. (2018). Comparative evaluation of rheological properties and micromechanics of non-foamed and foamed asphalt mastic. Construction and Building Materials, 193, 654–664. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.11.035
- Wu, J., & Airey, G. (2011). The influence of mineral fillers on mastic aging properties. ICCTP 2011: Towards Sustainable Transportation Systems, 3450–3461. https://doi.org/https://doi.org/10.1061/41186(421)342
- Wu, S., Zhu, J., Zhong, J., & Wang, D. (2011). Experimental investigation on related properties of asphalt mastic containing recycled red brick powder. Construction and Building Materials, 25(6), 2883–2887. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2010.12.040
- Xiao, Z., Chen, M., Wu, S., Xie, J., Kong, D., Qiao, Z., & Niu, C. (2019). Moisture susceptibility evaluation of asphalt mixtures containing steel slag powder as filler. Materials, 12(19), 3211. https://doi.org/https://doi.org/10.3390/ma12193211
- Xie, X., Tong, S., Ding, Y., Liu, H., & Liang, L. (2016). Effect of the amount of mineral powder on the ultraviolet aging properties of asphalt. Advances in Materials Science and Engineering, 2016, 1–9. https://doi.org/https://doi.org/10.1155/2016/5207391
- Xing, B., Fan, W., Zhuang, C., Qian, C., & Lv, X. (2019). Effects of the morphological characteristics of mineral powder fillers on the rheological properties of asphalt mastics at high and medium temperatures. Powder Technology, 348, 33–42. https://doi.org/https://doi.org/10.1016/j.powtec.2019.03.014
- Xing, C., Liu, L., & Sheng, J. (2020). A new progressed mastic aging method and effect of fillers on SBS modified bitumen aging. Construction and Building Materials, 238, 117732. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117732
- Yan, K., Xu, H., & Zhang, H. (2013). Effect of mineral filler on properties of warm asphalt mastic containing Sasobit. Construction and Building Materials, 48, 622–627. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.07.085
- Yi, J., Cao, Y., Feng, D., & Huang, Y. (2016). Characterization of zirconium tungstate filler and performance investigation on asphalt mastic made with zirconium tungstate filler. Construction and Building Materials, 125, 387–397. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.08.074
- Zeng, M., & Wu, C. (2008). Effects of type and content of mineral filler on viscosity of asphalt mastic and mixing and compaction temperatures of asphalt mixture. Transportation Research Record, 2051(1), 31–40. https://doi.org/https://doi.org/10.3141/2051-05
- Zhang, S., Chen, S., Liu, Y., & Zhang, M. (2009). Research on the performance of SP indicators for asphalt motar high-temperature by grey correlation entropy method. Pertroleunm Asphalt, 23(1), 237–240.
- Zhang, H., Li, H., Abdelhady, A., Mo, D., Yang, B., & Harvey, J. (2019). Optimum filler–bitumen ratio of asphalt mortar considering self-healing property. Journal of Materials in Civil Engineering, 31(8), 04019166. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0002792
- Zhang, Z., Li, P., & Wang, B. (2005). Effect of fiber and mineral filler on asphalt mortar performance. Journal of Chang'an University(Natural Science Edition, 25(5), 15–18.
- Zhang, H., Li, H., Zhang, Y., Wang, D., Harvey, J., & Wang, H. (2018). Performance enhancement of porous asphalt pavement using red mud as alternative filler. Construction and Building Materials, 160, 707–713. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.11.105
- Zhang, J., Liu, S., Yao, Z., Wu, S., Jiang, H., Liang, M., & Qiao, Y. (2018). Environmental aspects and pavement properties of red mud waste as the replacement of mineral filler in asphalt mixture. Construction and Building Materials, 180, 605–613. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.05.268
- Zhang, J., Sun, C., Li, P., Liang, M., Jiang, H., & Yao, Z. (2019). Experimental study on rheological properties and moisture susceptibility of asphalt mastic containing red mud waste as a filler substitute. Construction and Building Materials, 211, 159–166. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.252
- Zheng, C. F., Feng, Y. P., Ma, Z., & Yang, X. (2017). Influence of mineral filler on the low-temperature cohesive strength of asphalt mortar. Cold Regions Science and Technology, 133, 1–6. https://doi.org/https://doi.org/10.1016/j.coldregions.2017.08.006
- Zheng, C. F., Ma, Z., Guo, X. D., Zhang, T., Lyu, D., & Qin, Y. (2017). Coupling effect of the macro and micro characteristics of mineral powder on the low-temperature performance of asphalt mortar. Journal of Jilin University (Engineering And Technology Edition), 47((05|5)), 1465–1471.
- Zheng, C., Ruiming, L., Linlin, Z., Dan, L., & Yazhi, X. (2018). Effects of filler–bitumen ratio and mineral filler characteristics on the low-temperature performance of bitumen mastics. Materials, 11(7), 1155. https://doi.org/https://doi.org/10.3390/ma11071155
- Zheng, C., Zhao, D., Chen, C., Song, Z., & Zheng, S. (2013). Quantitative test technology study on the mesoscopic strength parameters of the mineral aggregate contact surface of bituminous-stabilized macadam. Construction and Building Materials, 40, 622–631. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2012.11.059
- Zhu, X., Cai, Y., Zhong, S., Zhu, J., & Zhao, H. (2017). Self-healing efficiency of ferrite-filled asphalt mixture after microwave irradiation. Construction and Building Materials, 141, 12–22. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.02.145
- Zulkati, A., Diew, W. Y., & Delai, D. S. (2012). Effects of fillers on properties of asphalt-concrete mixture. Journal of Transportation Engineering, 138(7), 902–910. https://doi.org/https://doi.org/10.1061/(ASCE)TE.1943-5436.0000395