References
- AASHTO. (1986). Standard specification for transportation materials and methods of sample and testing (14th ed.). American Association of state highway and transportation officials.
- Al-Mukhtar, M., Khattab, S., & Alcover, J. F. (2012). Microstructure and geotechnical properties of lime-treated expansive clayey soil. Engineering Geology, 139–140, 17–27. https://doi.org/https://doi.org/10.1016/j.enggeo.2012.04.004
- Al-Refaie, A., & Al-Tabat, M. D. (2011). Solving the multi-response problem in Taguchi method by benevolent formulation in DEA. Journal of Intelligent Manufacturing, 22(4), 505–521. https://doi.org/https://doi.org/10.1007/s10845-009-0312-8
- Al-taie, A., Disfani, M., Evans, R., Arulrajah, A., & Horpibulsuk, S. (2016). Impact of curing on behaviuor of basaltic expansive clay. Road Materials and Pavement Design, 19(3), 624–645. https://doi.org/https://doi.org/10.1080/14680629.2016.1267660
- AlAlaween, W. H., Khorsheed, B., Mahfouf, M., Reynolds, G. K., & Salman, A. D. (2020). An interpretable fuzzy logic based data-driven model for the twin screw granulation process. Powder Technology, 364, 135–144. https://doi.org/https://doi.org/10.1016/j.powtec.2020.01.052
- Anupam, A. K., Kumar, P., & Ransingchung, G. D. (2014). Performance evaluation of structural pproperties for soil stabilized using rice husk ash. Road Materials and Pavement Design, 15(3), 539–553. https://doi.org/https://doi.org/10.1080/14680629.2014.891533
- ASTM. (1992). Annual book of ASTM standards (Vol. 04.08). Philadelphia: American Society for Testing and Materials.
- ASTM C150. (2017). Standard specification for Portland cement, American society for testing and materials, ASTM international, Conshohocken, PA.
- Asuri, S., & Keshavamurthy, P. (2016). Expansive soil characterisation: An appraisal. INAE Letters, 1(1), 29–33. https://doi.org/https://doi.org/10.1007/s41403-016-0001-9
- Azizi, S. N., & Asemi, N. (2010). Parameter optimization of the fungicide (Vapam) sorption onto soil modified with clinoptilolite by Taguchi method. Journal of Environmental Science and Health, Part B, 45(8), 766–773. https://doi.org/https://doi.org/10.1080/03601234.2010.515171
- Boualleg, S., Bencheikh, M., Belagraa, L., Daoudi, A., & Chikouche, M. A. (2017). The combined effect of the initial cure and the type of cement on the natural carbonation, the portlandite content, and nonevaporable water in blended cement. Advances in Materials Science and Engineering, 2017, 1–17. https://doi.org/https://doi.org/10.1155/2017/5634713
- Bristish Standard Institute. (1990). Methods of testing soils for civil engineering purposes. BS 1377, Part 4.
- BS 1377. (1990). Method of testing soils for civl engineering purposes. In British standard institution (BS 1377 code) (pp. 1–38).
- Chamoli, S. (2015). A Taguchi approach for optimization of flow and geometrical parameters in a rectangular channel roughened with V down perforated baffles. Case Studies in Thermal Engineering, 5, 59–69. https://doi.org/https://doi.org/10.1016/j.csite.2015.01.001
- Chen, K., Kao, J., Hsu, C., & Hong, P. (2019). Multi-response optimization of mechanical properties for ZrWWN films grown using grey Taguchi approach. Ceramics International, 45(1), 327–333. https://doi.org/https://doi.org/10.1016/j.ceramint.2018.09.170
- Das, B., Roy, S., Rai, R. N., & Saha, S. C. (2015). Application of grey fuzzy logic for the optimization of CNC milling parameters for Al-4.5%Cu-TiC MMCs with multi-performance characteristics. Engineering Science and Technology, an International Journal, 1–9. https://doi.org/https://doi.org/10.1016/j.jestch.2015.12.002
- Deng, J. (1982). Control problems of grey systems. Systems and Control Letters, 1(5), 288–294. https://doi.org/https://doi.org/10.1016/S0167-6911(82)80025-X
- Elkady, T. Y. (2016). The effect of curing conditions on the unconfined compression strength of lime-treated expansive soils. Road Materials and Pavement Design, 17(1), 52–69. https://doi.org/https://doi.org/10.1080/14680629.2015.1062409
- Emeh, C., & Igwe, O. (2016). The combined effect of wood ash aand lime on the engineering properties of expansive soils. International Journal of Geotechnical Engineering, 10(3), 246–256. https://doi.org/https://doi.org/10.1080/19386362.2015.1125412
- Estabragh, A. R., Rafatjo, H., & Javadi, A. A. (2014). Treatment of an expansive soil by mechanical and chemical techniques. Geosynthetics International, 21(3), 233–243. https://doi.org/https://doi.org/10.1680/gein.14.00011
- Etim, R. K., Eberemu, A. O., & Osinubi, K. J. (2017). Stabilization of black cotton soil with lime and iron ore tailings admixture. Transportation Geotechnics, 10, 85–95. https://doi.org/https://doi.org/10.1016/j.trgeo.2017.01.002
- Feng, J.-c., Huang, H.-a., Yin, Y., & Zhang, K. (2019). Comprehensive security risk factor identification for small reservoirs with heterogeneous data based on grey relational analysis model. Water Science and Engineering, https://doi.org/https://doi.org/10.1016/j.wse.2019.12.009
- Garg, S. K. (2011). Soil mechanics and foundation engineering. Khana.
- Holtz, W. G., & Gibbs, H. J. (1956). Engineering properties of expansive clays. Transactions of the the American Society of Civil Engineering, 121(1), 641–663.
- Ijaz, N., Fuchu, D., Chao, M. L., ur. Rehman, Z., & Qui, Z. H. (2020). Integrating lignosulphonate and hydrated lime for the amelioration of expansive soil: A sustainable waste solution. Cleaner Production, https://doi.org/https://doi.org/10.1016/j.jclepro.2020.119985
- Ikeagwuani, C. C. (2016). Compressibility characterisitics of black cotton soil admixed with sawdust ash and lime. Nigerian Journal of Technology, 35(4), 718–725. https://doi.org/https://doi.org/10.4314/njt.v35i4.5
- Ikeagwuani, C. C. (2019). Optimisation of additives for expansive soil reinforcement [Unpublished doctoral dissertation].
- Ikeagwuani, C. C., & Nwonu, D. C. (2019a). Emerging trends in expansive soil stabilisation: A review. Journal of Rock Mechanics and Geotechnical Engineering, 11(2), 423–440. https://doi.org/https://doi.org/10.1016/j.jrmge.2018.08.013
- Ikeagwuani, C. C., & Nwonu, D. C. (2019b). Resilient modulus of lime-bamboo ash stabilized subgrade soil with different compactive energy. Geotechnical and Geological Engineering, 37(4), 3557–3565. https://doi.org/https://doi.org/10.1007/s10706-019-00849-6
- Ikeagwuani, C. C., Obeta, I. N., & Agunwamba, J. C. (2019). Stabilisation of black cotton soil subgrade using sawdust ash and lime. Soils and Foundations, 59(1), 162–175. https://doi.org/https://doi.org/10.1016/j.sandf.2018.10.004
- IS 2720 Part 40. (1977). Indian Standards method of test for soils. In Bureau of Indian standards (pp. 1–10). Bureau of Indian standard and Manak Bhavan, New Delhi.
- Jain, A. K., & Mao, J. (1996). Artificial neural networks: A tutorial. Computer, 29(3), 31–44. https://doi.org/https://doi.org/10.1109/2.485891
- Jamsawang, P., Charoensil, S., Namjan, T., Jongpradist, P., & Likitlersuang, S. (2020). Mechanical and microstructural properties of dredged sediments treated with cement and fly ash for use as road materials. Road Materials and Pavement Design, 1–25. https://doi.org/https://doi.org/10.1080/14680629.2020.1772349
- Jennings, H. M. (2008). Refinements to colloid models of C-S-H in cement: CM-II. Cement and Concrete Research, 38(3), 275–289. https://doi.org/https://doi.org/10.1016/j.cemconres.2007.10.006
- Kackar, R. N. (1985). Off-line quality control, parameter design, and the Taguchi method. Journal of Quality Technology, 17(4), 176–188. https://doi.org/https://doi.org/10.1080/00224065.1985.11978964
- Kampala, A., Horpibulsuk, S., Prongmanee, N., & Chinkulkijniwat, A. (2014). Influence of wet-dry cycles on compressive strength of calcium carbide residue – fly ash stabilized clay. Journal of Materials in Civil Engineering, 26(4), 633–643. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000853
- Kampala, A., Jitsangiam, P., Pimraksa, K., & Chindaprasirt, P. (2020). An investigation of sulfate effects on compaction characteristics and strength development of cement-treated sulfate bearing clay subgrade. Road Materials and Pavement Design, 1–14. https://doi.org/https://doi.org/10.1080/14680629.2020.1753564
- Kapeluszna, E., Kotwica, Ł., Różycka, A., & Gołek, Ł. (2017). Incorporation of Al in C-A-S-H gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis. Construction and Building Materials, 155, 643–653. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.08.091
- Karatai, T. R., Kaluli, J. W., Kabubo, C., & Thiong’o, G. (2017). Soil stabilization using rice husk ash and natural lime as an alternative to cutting and filling in road construction. Journal of Construction Engineering and Management, 143(5), 1–5. https://doi.org/https://doi.org/10.1061/(ASCE)CO.1943-7862.0001235
- Latifi, N., Horpibulsuk, S., Meechan, C., Abd-Majid, M. Z., Tahir, M. M., & Mohamad, E. T. (2017). Improvement of problematic soils with biopolymer – an environmentally friendly soil stabilizer. Journal of Materials in Civil Engineering, 29(2), 1–11. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001706
- Latifi, N., Rashid, A. S. A., Siddiqua, S., & Horpibulsuk, S. (2015). Micro-structural analysis of strength development in low and high swelling clays stabilized with magnesium chloride solution – a green soil stabilizer. Applied Clay Science, 118, 195–206. https://doi.org/https://doi.org/10.1016/j.clay.2015.10.001
- Li, X., Wang, Z., Zhang, L., Zou, C., & Dorrell, D. D. (2019). State-of-health estimation for Li-ion batteries bycombing the incremental capacity analysis method with grey relational analysis. Journal of Power Sources, 410-411(15–31), 106–114. https://doi.org/https://doi.org/10.1016/j.jpowsour.2018.10.069
- Li, Y., & Zhu, L. (2019). Optimization of user experience in mobile application design by using a fuzzy analytic-network-process-based Taguchi method. Applied Soft Computing, 79, 268–282. https://doi.org/https://doi.org/10.1016/j.asoc.2019.03.048
- Lilly, J. H. (2010). Fuzzy control and identification (3rd ed.). John Wiley.
- Liu, Y., Chang, C., Namdar, A., She, Y., Lin, C., Yuan, X., & Yang, Q. (2019). Stabilisation of expansive soil using cementing material from rice husk ash and calcium carbide residue. Construction and Building Materials, 221, 1–11. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.05.157
- Liu, L., Zhou, A., Deng, Y., Cui, Y., Yu, Z., & Yu, C. (2019). Strength performance of cement/slag-based stabilized soft clays. Construction and Building Materials, 211(2019), 909–918. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.256
- Luo, D., Wei, B. L., & Lin, Y. W. (2015). The optimisation of several grey incidence analysis models. Journal of Grey System, 27(4), 1–11. https://doi.org/https://doi.org/10.1109/GSIS.2015.7301849
- Maneli, A., Kupolati, W. K., Abiola, O. S., & Ndambuki, J. M. (2016). Influence of fly ash, ground-granulated blast furnace slag and lime on unconfined compressive strength of black cotton soil. Road Materials and Pavement Design, 17(1), 252–260. https://doi.org/https://doi.org/10.1080/14680629.2015.1066703
- Moghal, A. B., Ashfaq, M., Al-Obaid, A. K., Abbas, M. F., Al-Mahbashi, A. M., & Shakar, A. A. (2020). Compaction delay and its effect on the geotechnical properties of lime treated semi-arid soils. Road Materials and Pavement Design, 1–15. https://doi.org/https://doi.org/10.1080/14680629.2020.1784256
- Mohammadi, T., & Kazemi, P. (2014). Taguchi optimization approach for phenolic wastewater treatment by vacuum membrane distillation. Desalination and Water Treatment, 52(7-9), 1341–1349. https://doi.org/https://doi.org/10.1080/19443994.2013.794557
- Nagaraju, N., Venkatesu, S., & Ujwala, N. G. (2018). Optimization of process paramters of EDM process using fuzzy logic and Taguchi methods for improving material removal rate and surface finish. Materials Today: Proceedings, 5(2), 7420–7428. https://doi.org/https://doi.org/10.1016/j.matpr.2017.11.413
- Nonat, A. (2004). The structure and stoichiometry of C-S-H. Cement and Concrete Research, 34(9), 1521–1528. https://doi.org/https://doi.org/10.1016/j.cemconres.2004.04.035
- Nwaiwu, C. M., Mshelia, S. H., & Durkwa, J. K. (2012). Compactive effort influence on properties of quarry dust-black cotton soil mixtures. International Journal of Geotechnical Engineering, 6(1), 91–101. https://doi.org/https://doi.org/10.3328/IJGE.2012.06.01.91-101
- Nwonu, D. C., & Ikeagwuani, C. C. (2019). Evaluating the effect of agro-based admixture on lime-treated expansive soil for subgrade material. International Journal of Pavement Engineering, 1–15. https://doi.org/https://doi.org/10.1080/10298436.2019.1703979
- Nwonu, D. C., & Ikeagwuani, C. C. (2020). Microdust effect on the physical condition and microstructure of tropical black clay. International Journal of Pavement Research and Technology. https://doi.org/https://doi.org/10.1007/s42947-020-0004-5
- Olgun, M. (2013). The effects and optimization of additives for expansive clays under freeze-thaw conditions. Cold Regions Science and Technology, 93, 36–46. https://doi.org/https://doi.org/10.1016/j.coldregions.2013.06.001
- Onyelowe, K., Alaneme, G., Igboayaka, C., Orji, F., Ugwuanyi, H., Van, D. B., & Van, M. N. (2019). Scheffe optimisation of swelling, Californai bearing ratio, compressive strength and durability potentials of quarry dust stabilised soft clay soil. Materials Science for Energy Technologies, 2(1), 67–77. https://doi.org/https://doi.org/10.1016/j.mset.2018.10.005
- Onyelowe, K., Igboayaka, C., Orji, F., Ugwuanyi, H., & Van, D. B. (2019). Triaxial and density behaviour of quarry dust based geopolymer cement treated expansive soil with crushed waste glasses for pavement foundation purposes. International Journal of Pavement Research and Technology, 12(1), 78–87. https://doi.org/https://doi.org/10.1007/s42947-019-0010-7
- Palacharla, P. V., & Nelson, P. C. (1999). Application of fuzzy logic and neural networks for dynamic travel time estimation. International Transactions in Operational Research, 6(1), 145–160. https://doi.org/https://doi.org/10.1111/j.1475-3995.1999.tb00148.x
- Park, K., & Ahn, J. H. (2004). Design of experiment considering two-way interactions aand its application to injection molding processes with numerical analysis. Journal of Materials Processing Technology, 146(2), 221–227. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2003.10.020
- Petry, T. M., & Armstrong, J. C. (1989). Stabilisation of expansive soils. Transportation Research Record, 1219, 103–112.
- Phadke, M. S. (1989). Quality engineering using robust design. Prentice-Hall.
- Phanikumar, B. R., & Raju, E. R. (2020). Compaction and strength characterisitcs of an expansive clay stabilised with lime sludge and cement. Soils and Foundations, 1–10. https://doi.org/https://doi.org/10.1016/j.sandf.2020.01.007
- Phanikumar, B. R., Sreedharan, R., & Aniruddh, C. (2015). Swell-compressibility characteristics of lime-blended expansive clays - a comparative study. Geomechanics and Geoengineering, 10(2), 153–162. https://doi.org/https://doi.org/10.1080/17486025.2014.902120
- Ponce, P., Meier, A., Mendez, J. I., Peffer, T., Molina, A., & Mata, O. (2020). Tailored gamification and serious game framework based on fuzzy logic for saving energy in connected thermostats. Journal of Cleaner Production, 262. https://doi.org/https://doi.org/10.1016/j.jclepro.2020.121167
- Prusty, J. K., & Pradhan, B. (2020). Multi-response optimization using Taguchi-grey relational analysis for composition of flys ash-granulated blast furnace slag based geopolymer concrete. Construction and Building Materials, 24, 1–17. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.118049
- Puppala, A. J., Griffin, J. A., Hoyos, L. R., & Chomtid, S. (2004). Studies on sulfate-resistant cement stabilization methods to address sulfate-induced soil heave. Journal of Geotechnical and Geoenvironmental Engineering, 130(4), 391–402. https://doi.org/https://doi.org/10.1061/(ASCE)1090-0241(2004)130:4(391)
- Rao, R. S., Kumar, C. G., Prakasham, R. S., & Hobbs, P. J. (2008). The Taguchi methodology as a statistical tool for biotechnological applications: A critical appraisal. Biotechnology Journal, 3(4), 510–523. https://doi.org/https://doi.org/10.1002/biot.200700201
- Rao, S. M., Reddy, B. V., & Muttharam, M. (2001). The impact of cyclic wetting and drying on the swelling behaviour of stabilized expansive soils. Engineering Geology, 60(1-4), 223–233. https://doi.org/https://doi.org/10.1016/S0013-7952(00)00103-4
- Sarraf, F., & Nejad, S. H. (2019). Improving performance evaluation based on balanced scorecard with grey relational analysis and data envelopment analysis approaches. Evaluation and Program Planning, https://doi.org/https://doi.org/10.1016/j.evalprogplan.2019.101762
- Shahavi, M. H., Hosseini, M., Jahanshahi, M., Meyer, R. L., & Darzi, G. N. (2015). Clove oil nanoemulsion as an effective antibacterial agent: Taguchi optimization method. Desalination and Water Treatment, 1–12. https://doi.org/https://doi.org/10.1080/19443994.2015.1092893
- Shahbazi, M., Rowshanzamir, M., Abtahi, S. M., & Hejazi, S. M. (2017). Optimization of carpet waste fibres and steel slag particles to reinforce expansive soil using response surface methodology. Applied Clay Science, 142, 185–192. https://doi.org/https://doi.org/10.1016/j.clay.2016.11.027
- Sharma, A. K., & Sivapullaiah, P. V. (2017). Swelling behaviour of expansive soil treated with fly ash-GGBS based binder. Geomechanics and Geoengineering: An International Journal, 12(3), 191–200. https://doi.org/https://doi.org/10.1080/17486025.2016.1215548
- Singh, H., Gupta, M. M., Meltzler, T., Hou, Z. G., Garg, K. K., Solo, A. M. G., & Zadeh, L. A. (2013). Real-life application of fuzzy logic. Advances in Fuzzy Systems, 2013, 1–3. https://doi.org/https://doi.org/10.1155/2013/581879
- Sivapullaiah, P. V., Sridharan, A., & Ramesh, H. N. (2000). Strength behaviour of lime-treated soils in the presence of sulphate. Canadian Geotechnical Journal, 37(6), 1358–1367. https://doi.org/https://doi.org/10.1139/t00-052
- Smaili, A., & Mrad, F. (2008). Mechatronics integrated technologies for intelligent machines. Oxford University Press.
- Soltani, A., Deng, A., Taheri, A., & Mirzababaei, M. (2017). A sulphonated oil for stabilisation of expansive soils. International Journal of Pavement Engineering, https://doi.org/https://doi.org/10.1080/10298436.2017.1408270
- Soosan, T. G., Sridharan, A., Jose, B. T., & Abraham, B. M. (2005). Utilization of quarry dust to improve the geotechnical properties of soils in highway construction. Geotechnical Testing Journal, 28(4), 1–10. https://doi.org/https://doi.org/10.1520/GTJ11768
- Sun, G., Guan, X., Yi, X., & Zhou, Z. (2018). Grey relational analysis between hesitant fuzzy sets with applications to pattern recognition. Expert Systems with Applications, 92, 521–532. https://doi.org/https://doi.org/10.1016/j.eswa.2017.09.048
- Taguchi, G. (1976). Experimental designs (in Japanese) (3rd ed.). Maruzen.
- Taguchi, G. (1986). Introduction to quality engineering. Asian Productivity Organization.
- Velde, B., & Peck, T. R. (2002). Clay mineral changes in the morrow experimental plots University of Illinois. Clays and Clay Minerals, 50(3), 364–370. https://doi.org/https://doi.org/10.1346/000986002760833738
- Voelkel, J. G. (2014). Fractional factorial designs, issues in. In Wiley statsref: Statistics reference online (pp. 1–13). https://doi.org/https://doi.org/10.1002/9781118445112.stat04079
- Wakchaure, K. N., Thakur, A. G., Gadakh, V., & Kumar, A. (2018). Multi-objective optimization of friction stir welding of aluminium alloy 6068-T6 using hybrid Taguchi-grey relation analysis-ANN method. Materials Today: Proceedings, 5(2), 7150–7159. https://doi.org/https://doi.org/10.1016/j.matpr.2017.11.380
- Wang, S., & Baaj, H. (2020). Treatment of weak subgrade materials with cement and hydraulic road binder (HRB). Road Materials and Pavement Design, 1–24. https://doi.org/https://doi.org/10.1080/14680629.2020.1712224
- Wang, J., Pan, X., Wang, L. G., & Wei, W. (2018). Method of spare parts prediction models evaluation based on grey comprehensive correlation degree and association rules mining: A case study in aviation. Mathematical Problems in Engineering, https://doi.org/https://doi.org/10.1155/2018/2643405
- Wu, B., Cheng, T., Yip, T. L., & Wang, Y. (2020). Fuzzy logic based dynamic decision-making system for intelligent navigation strategy within inland traffic separation schemes. Ocean Engineering, 197, 1–15. https://doi.org/https://doi.org/10.1016/j.oceaneng.2019.106909
- Yan, F., Qiao, D. Y., Qian, B., Ma, L., Xing, X. G., Zhang, Y., & Wang, X. G. (2016). Improvement of CCME WQI using grey relational method. Journal of Hydrology, 543(B), 316–323. https://doi.org/https://doi.org/10.1016/j.jhydrol.2016.10.007
- Yu, B., & Liu, Y. (2018). Improvement in phase purity and yield of hydrothermally synthesized smectite using Taguchi method. Applied Clay Science, 161, 103–109. https://doi.org/https://doi.org/10.1016/j.clay.2018.04.001
- Zadeh, L. A. (1965). Fuzzy sets. Information and Control, 8(3), 338–353. https://doi.org/https://doi.org/10.1016/S0019-9958(65)90241-X
- Zadeh, L. A. (1972). A fuzzy set theoretic interpretation of linguistic hedges. Journal of Cybernetics, 2(3), 4–34. https://doi.org/https://doi.org/10.1080/01969727208542910
- Zhu, B., Yuan, L., & Ye, S. (2019). Examining the multi-timescales of European carbon market with grey relational analysis and empirical mode decomposition. Physica A: Statistical Mechanics and its Applications, 517, 392–399. doi: https://doi.org/10.1016/j.physa.2018.11.016