References
- Al-Qadi, I., Ozer, H., Lambros, J., Lippert, D., El Khatib, A., Khan, T., Singh, P., & Rivera-Perez, J. J. (2015). Testing protocols to ensure mix performance w/ high RAP and RAS. Illinois Center for Transportation, 1, 209. https://pdfs.semanticscholar.org/e17a/03e0f7f61cc4265826b9048cb5d23a9d2230.pdf
- Alfalah, A., Offenbacker, D., Ali, A., Decarlo, C., Lein, W., Mehta, Y., & Elshaer, M. (2020). Assessment of the impact of fiber types on the performance of fiber-reinforced hot mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2674(4), 337–347. https://doi.org/https://doi.org/10.1177/0361198120912425
- Ali, U. M., Al-Qadi, I. L., & Ozer, H. (2020). Flexibility index threshold optimization for various asphalt concrete mixes and climatic conditions. Transportation Research Record: Journal of the Transportation Research Board, 2674(1), 104–112. https://doi.org/https://doi.org/10.1177/0361198119899611
- Anderson, R. M., King, G. N., Hanson, D. I., & Blankenship, P. B. (2011). Evaluation of the relationship between asphalt binder properties and non-load related cracking. Journal of the Association of Asphalt Paving Technologists, 80.
- ASTM D7313. (2013). ASTM D7313-13: Standard test method for determining fracture energy of asphalt-aggregate mixtures using the disk-shaped compact tension geometry. ASTM International Standards, 2–8. https://doi.org/https://doi.org/10.1520/D7313
- ASTM D8225. (2019). Standard test method for determination of cracking tolerance index of asphalt mixture using the indirect tensile cracking test at. April, 1–6. https://doi.org/https://doi.org/10.1520/D8225-19.Copyright
- Barros, L., Garcia, V. M., Garibay, J., Abdallah, I., & Nazarian, S. (2019). Implications of including reclaimed asphalt pavement materials to performance of balanced asphalt concrete mixes. Transportation Research Record: Journal of the Transportation Research Board, 2673(12), 670–678. https://doi.org/https://doi.org/10.1177/0361198119875666
- Behnia, B., Dave, E., Ahmed, S., Buttlar, W., & Reis, H. (2011). Effects of recycled asphalt pavement amounts on low-temperature cracking performance of asphalt mixtures using acoustic emissions. Transportation Research Record: Journal of the Transportation Research Board, 2208(1), 64–71. https://doi.org/https://doi.org/10.3141/2208-09
- Bennert, T., Haas, E., & Wass, E. (2018). Indirect tensile test (IDT) to determine asphalt mixture performance indicators during quality control testing in New Jersey. Transportation Research Record: Journal of the Transportation Research Board, 2672(28), 394–403. https://doi.org/https://doi.org/10.1177/0361198118793276
- Braham, A. F., Buttlar, W. G., Clyne, T. R., Marasteanu, M. O., & Turos, M. I. (2009). The effect of long-term laboratory aging on asphalt concrete fracture energy. Journal of the Association of Asphalt Paving Technologists, 78.
- Buttlar, W. G., & Rath, P. (2017). Illinois tollway project Illinois tollway I-88 ground tire rubber test sections. Illinois State Toll Highway Authority.
- Buttlar, W. G., Rath, P., Majidifard, H., Dave, E. V., & Wang, H. (2018). Relating DC (T) fracture energy to field cracking observations and recommended specification thresholds for performance-engineered mix design. Asphalt Mixtures, 51.
- Buttlar, W. G., Roque, R., & Reid, B. (1998). Automated procedure for generation of creep compliance master curve for asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1630(1), 28–36. https://doi.org/https://doi.org/10.3141/1630-04
- Buttlar, W. G., Urra-Contreras, L., Jahangiri, B., Rath, P., & Majidifard, H. (2020). Support for balanced asphalt mixture design specification development in Missouri, No. cmr 20-010.
- Cascione, A. A., Williams, R. C., Buttlar, W. G., Ahmed, S., & Hill, B. (2011). Laboratory evaluation of field produced hot mix asphalt containing post-consumer recycled asphalt shingles and fractionated recycled asphalt pavement. AAPT, 80, 377–418.
- Chiu, C. T., & Lu, L. C. (2007). A laboratory study on stone matrix asphalt using ground tire rubber. Construction and Building Materials, 21(5), 1027–1033. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2006.02.005
- Daniel, J. S., Corrigan, M., Jacques, C., Nemati, R., Dave, E. V., & Congalton, A. (2019). Comparison of asphalt mixture specimen fabrication methods and binder tests for cracking evaluation of field mixtures. Road Materials and Pavement Design, 20(5), 1059–1075. https://doi.org/https://doi.org/10.1080/14680629.2018.1431148
- Dave, E. V., Buttlar, W. G., Leon, S. E., Behnia, B., & Paulino, G. H. (2013). IlliTC – low-temperature cracking model for asphalt pavements. Road Materials and Pavement Design, 14(December), 57–78. https://doi.org/https://doi.org/10.1080/14680629.2013.812838
- Dave, E. V., & Hoplin, C. (2015). Flexible pavement thermal cracking performance sensitivity to fracture energy variation of asphalt mixtures. Road Materials and Pavement Design, 16(sup1), 423–441. https://doi.org/https://doi.org/10.1080/14680629.2015.1029697
- Gillen, S. (2007). Ground tire rubber (GTR) asphalt pavement demonstration project.
- Hill, B., Behnia, B., Buttlar, W. G., & Reis, H. (2013). Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement through mechanical performance tests and an acoustic emission approach. Journal of Materials in Civil Engineering, 25(December), 1887–1897. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000757
- Im, S., & Zhou, F. (2017). New and simpler cracking test method for asphalt mix designs. Transportation Research Record: Journal of the Transportation Research Board, 2631(1), 1–10. https://doi.org/https://doi.org/10.3141/2631-01
- Islam, M. R., & Tarefder, R. A. (2015). Coefficients of thermal contraction and expansion of asphalt concrete in the laboratory. Journal of Materials in Civil Engineering, 27(11), 1239–1247. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001277
- Jahanbakhsh, H., Karimi, M. M., Jahangiri, B., & Nejad, F. M. (2018). Induction heating and healing of carbon black modified asphalt concrete under microwave radiation. Construction and Building Materials, 174, 656–666. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.04.002
- Jahangiri, B., Majidifard, H., Meister, J., & Buttlar, W. G. (2019). Performance evaluation of asphalt mixtures with reclaimed asphalt pavement and recycled asphalt shingles in Missouri. Transportation Research Record: Journal of the Transportation Research Board, 2673(2), 392–403. https://doi.org/https://doi.org/10.1177/0361198119825638
- Kim, Y. R., Haghshenas, H, Nabizadeh, H, & Santosh, K (2016). Research on high-RAP asphalt mixtures with rejuvenators and WMA additives (No. SPR-P1 (15) M016). Nebraska. Dept. of Roads..
- Ling, C., Swiertz, D., Mandal, T., Teymourpour, P., & Bahia, H. (2017). Sensitivity of the Illinois flexibility index test to mixture design factors. Transportation Research Record: Journal of the Transportation Research Board, 2631, 153–159. https://doi.org/https://doi.org/10.3141/2631-17
- Liu, J., Zhao, S., Li, P., & Saboundjian, S. (2017). Variability of composition, volumetric, and mechanic properties of hot mix asphalt for quality assurance. Journal of Materials in Civil Engineering, 29(3), 1–9. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001481
- Lytton, R. L., Uzan, J., Fernando, E. G., Roque, R., Hiltunen, D., & Stoffels, S. M. (1993). Development and validation of performance prediction models and specifications for asphalt binders and paving mixes. SHRP-A-357. 552.
- Majidifard, H., Jahangiri, B., Buttlar, W. G., & Alavi, A. H. (2019). New machine learning-based prediction models for fracture energy of asphalt mixtures. Measurement, 135, 438–451. https://doi.org/https://doi.org/10.1016/j.measurement.2018.11.081
- Mbarki, R., Kutay, M. E., Gibson, N., & Abbas, A. R. (2012). Comparison between fatigue performance of horizontal cores from different asphalt pavement depths and laboratory specimens. Road Materials and Pavement Design, 13(3), 422–432. https://doi.org/https://doi.org/10.1080/14680629.2012.685843
- Mohammad, L. N., Elseifi, M., Cao, W., Raghavendra, A., & Ye, M. (2017). Evaluation of various Hamburg wheel-tracking devices and AASHTO T 324 specification for rutting testing of asphalt mixtures. Road Materials and Pavement Design, 18(sup4), 128–143. https://doi.org/https://doi.org/10.1080/14680629.2017.1389092
- Mohammad, L. N., Elseifi, M. A., Raghavendra, A., & Mengqiu, Y. (2016). Hamburg wheel-track test equipment requirements and improvements to AASHTO T 324. In Hamburg wheel-track test equipment requirements and improvements to AASHTO T 324. https://doi.org/https://doi.org/10.17226/21931
- NCHRP. (2004). Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Final report, NCHRP project 1–37A. In Transportation research board, national research council.
- Ozer, H., Al-Qadi, I. L., Lambros, J., El-Khatib, A., Singhvi, P., & Doll, B. (2016). Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters. Construction and Building Materials, 115, 390–401. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.03.144
- Ozer, H., Al-Qadi, I. L., Singhvi, P., Khan, T., Rivera-Perez, J., & El-Khatib, A. (2016). Fracture characterization of asphalt mixtures with high recycled content using Illinois semicircular bending test method and flexibility index. Transportation Research Record: Journal of the Transportation Research Board, 2575(1), 130–137. https://doi.org/https://doi.org/10.3141/2575-14
- Rath, P., Love, J. E., Buttlar, W. G., & Reis, H. (2019). Performance analysis of asphalt mixtures modified with ground tire rubber modifiers and recycled materials. Sustainability, 11(6), 1792. https://doi.org/https://doi.org/10.3390/su11061792
- Richardson, D. N., & Lusher, S. M. (2008). Determination of creep compliance and tensile strength of hot-mix asphalt for wearing courses in Missouri. In Missouri department of transportation (Issue April).
- Roque, R., & Buttlar, W. G. (1992). The development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile mode (with discussion). Journal of the Association of Asphalt Paving Technologists, 61, 304–332.
- Seitllari, A., Boz, I., Habbouche, J., & Diefenderfer, S. D. (2020). Assessment of cracking performance indices of asphalt mixtures at intermediate temperatures. International Journal of Pavement Engineering, 0(0), 1–10. https://doi.org/https://doi.org/10.1080/10298436.2020.1730838
- Shen, J., Amirkhanian, S., & Aune Miller, J. (2007). Effects of rejuvenating agents on superpave mixtures containing reclaimed asphalt pavement. Journal of Materials in Civil Engineering, 19(5), 376–384. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(376)
- Wagoner, M. P., Buttlar, W. G., & Paulino, G. H. (2005). Disk-shaped compact tension test for asphalt concrete fracture. Experimental Mechanics, 45(3), 270–277. https://doi.org/https://doi.org/10.1177/0014485105053205
- Walker, D. (2001). Unimproved roads PASER (pavement surface evaluation and rating) manual. Wisconsin Transportation Information Center.
- Walubita, L., Zhang, J., Das, G., Hu, X., Mushota, C., Alvarez, A., & Scullion, T. (2012). Hot-mix asphalt permanent deformation evaluated by Hamburg wheel tracking, dynamic modulus, and repeated load tests. Transportation Research Record: Journal of the Transportation Research Board, 2296, 46–56. https://doi.org/https://doi.org/10.3141/2296-05
- Wang, H., Rath, P., & Buttlar, W. G. (2020). Recycled asphalt shingle modified asphalt mixture design and performance evaluation. Journal of Traffic and Transportation Engineering (English Edition), 205–214. https://doi.org/https://doi.org/10.1016/j.jtte.2019.09.004
- Willis, R. J. (2013). Use of ground tire rubber in a dense-graded asphalt mixture on US 231 in Alabama: A case study. In Airfield and highway pavement 2013. https://doi.org/https://doi.org/10.1061/9780784413005.100
- Wu, S., Al-Qadi, I. L., Lippert, D. L., Ozer, H., Luque, A. F. E., & Safi, F. R. (2017). Early-age performance characterization of hot-mix asphalt overlay with varying amounts of asphalt binder replacement. Construction and Building Materials, 153, 294–306. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.07.114
- Xiao, F., Putman, B., & Amirkhanian, S. N. (2015). Plant and laboratory compaction effects on performance properties of plant-foamed asphalt mixtures containing RAP. Journal of Materials in Civil Engineering, 27(9), 04014240. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533
- Yang, X., You, Z., Hasan, M. R. M., Diab, A., Shao, H., Chen, S., & Ge, D. (2017). Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm. Journal of Cleaner Production, 159, 346–358. https://doi.org/https://doi.org/10.1016/j.jclepro.2017.04.168
- Zhou, F. (2018). IDEAL cracking test for QC / QA and associated criteria. Texas A&M Transportation Institute.
- Zhou, F., Im, S., Sun, L., & Scullion, T. (2017). Development of an IDEAL cracking test for asphalt mix design and QC/QA. Road Materials and Pavement Design, 18(sup4), 405–427. https://doi.org/https://doi.org/10.1080/14680629.2017.1389082
- Zhou, F., Karki, P., Xie, S., Yuan, J. S., Sun, L., Lee, R., & Barborak, R. (2018). Toward the development of performance-related specification for bio-rejuvenators. Construction and Building Materials, 174, 443–455. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.04.093