References
- Al-Mansour, A. I., Sinha, K. C., & Kuczek, T. (1994). Effects of routine maintenance on flexible pavement condition. Journal of Transportation Engineering, 120(1), 65–73. https://doi.org/https://doi.org/10.1061/(ASCE)0733-947X(1994)120:1(65)
- Al-Qadi, I., Dessouky, S., & Yang, S.-H. (2010). Linear viscoelastic modeling for hot-poured crack sealants at low temperature. Journal of Materials in Civil Engineering, 22(10), 996–1004. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000101
- Al-Qadi, I., & Fini, E. (2011). Development of a crack sealant adhesion test (CSADT) specification for hot-poured bituminous sealants. Journal of Testing and Evaluation, 39(2), 184–190. https://doi.org/https://doi.org/10.1520/JTE103108
- Al-Qadi, I., Fini, E., Elseifi, M., Masson, J., & McGhee, K. (2007a). Development of a viscosity specification for Hot-poured bituminous sealants. Journal of Testing and Evaluation, 35(4), 395–403. https://doi.org/https://doi.org/10.1520/JTE100260
- Al-Qadi, I. L., Loulizi, A., Aref, S., Masson, J. F., & McGhee, K. M. (2005). Modification of bending beam rheometer specimen for low-temperature evaluation of bituminous crack sealants. Transportation Research Record: Journal of the Transportation Research Board, 1933(1), 96–106. https://doi.org/https://doi.org/10.1177/0361198105193300111
- Al-Qadi, I., Yang, S.-H., Dessouky, S., & Masson, J. F. (2007b). Low-temperature characterization of hot-poured crack sealant by crack sealant direct tensile tester. Transportation Research Record: Journal of the Transportation Research Board, 1991(1), 109–118. https://doi.org/https://doi.org/10.3141/1991-13
- Bag, M., Banerjee, S., Faust, R., & Venkataraman, D. (2016). Self-healing polymer sealant for encapsulating flexible solar cells. Solar Energy Materials and Solar Cells, 145, 418–422. https://doi.org/https://doi.org/10.1016/j.solmat.2015.11.004
- Banerjee, S., Tripathy, R., Cozzens, D., Nagy, T., Keki, S., Zsuga, M., Faust, R., & Smart, P. (2015). Photoinduced smart, self-healing polymer sealant for photovoltaics. ACS Applied Materials & Interfaces, 7(3), 2064–2072. https://doi.org/https://doi.org/10.1021/am508096c
- Behl, M., & Lendlein, A. (2007). Shape-memory polymers. Materials Today, 10(4), 20–28. https://doi.org/https://doi.org/10.1016/S1369-7021(07)70047-0
- Biel, T. D., & Lee, H. (1997). Performance study of Portland cement concrete pavement joint sealants. Journal of Transportation Engineering, 123(5), 398–404. https://doi.org/https://doi.org/10.1061/(ASCE)0733-947X(1997)123:5(398)
- Bommarito, T., Sparling, D. W., & Halbrook, R. S. (2010a). Toxicity of coal-tar pavement sealants and ultraviolet radiation to ambystoma maculatum. Ecotoxicology, 19(6), 1147–1156. https://doi.org/https://doi.org/10.1007/s10646-010-0498-8
- Bommarito, T., Sparling, D. W., & Halbrook, R. S. (2010b). Toxicity of coal–tar and asphalt sealants to eastern newts, notophthalmus viridescens. Chemosphere, 81(2), 187–193. https://doi.org/https://doi.org/10.1016/j.chemosphere.2010.06.058
- Britton, H. B. (1965). Bridge joint sealing – its materials and mechanical problems. Highway Research Record 80 joints and sealants a symposium and other papers.
- Bryer, P. J., Scoggins, M., & McClintock, N. L. (2010). Coal-tar based pavement sealant toxicity to freshwater macroinvertebrates. Environmental Pollution, 158(5), 1932–1937. https://doi.org/https://doi.org/10.1016/j.envpol.2009.10.038
- Bueno, M., Arraigada, M., & Partl, M. N. (2020). Induction heating technology for improving compaction of asphalt joints. International Journal of Pavement Engineering, 21(12), 1532–1540. https://doi.org/https://doi.org/10.1080/10298436.2018.1554218
- Cao, L., Yang, C., Dong, Z., & Nonde, L. (2019). Evaluation of crack sealant adhesion properties under complex service ambient conditions based on the weak boundary layer (WBL) theory. Construction and Building Materials, 200, 293–300. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.12.159
- Carbonell-Blasco, P., Martín-Martínez, J. M., & Antoniac, I. V. (2013). Synthesis and characterization of polyurethane sealants containing rosin intended for sealing defect in annulus for disc regeneration. International Journal of Adhesion and Adhesives, 42, 11–20. https://doi.org/https://doi.org/10.1016/j.ijadhadh.2012.11.011
- Chen, T., Qiu, J., Zhu, K., & Li, J. (2016). Electro-mechanical performance of polyurethane dielectric elastomer flexible micro-actuator composite modified with titanium dioxide-graphene hybrid fillers. Materials & Design, 90, 1069–1076. https://doi.org/https://doi.org/10.1016/j.matdes.2015.11.068
- Chong, G. J. (1990). Rout and seal of cracks in flexible pavement: A cost-effective preventive maintenance procedure. Transp. Res. Rec, 1268, 8–16.
- Christen, K., Thacker, P. D., Schipper, O., & Renner, R. (2005). Scrutinizing pavement sealants for PAHs. Environmental Science & Technology, 39(15), 312A–317A. https://doi.org/https://doi.org/10.1021/es053317d
- Clark, L. J., & Cosman, M. A. (2003). Use of permapol® P3.1 polymers and epoxy resins in the formulation of aerospace sealants. International Journal of Adhesion and Adhesives, 23(5), 343–348. https://doi.org/https://doi.org/10.1016/S0143-7496(03)00002-2
- Eaton, R., & Ashcraft, J. (1992). State-of-the-Art Survey of Flexible Pavement Crack Sealing Procedures in the United States. Rep. 91-18, 24.
- Evers, R. C.; Ontario Ministry of T. Communications Engineering Materials O. 1983. Evaluation of crack sealing compounds for asphaltic pavements: interim report no. 3. Engineering Materials Office, Ministry of Transportation and Communications.
- Fan, J., & Li, G. (2017). High performance and tunable artificial muscle based on two-way shape memory polymer. RSC Advances, 7(2), 1127–1136. https://doi.org/https://doi.org/10.1039/C6RA25024F
- Fan, J., & Li, G. (2018). High enthalpy storage thermoset network with giant stress and energy output in rubbery state. Nature Communications, 9(1), 642–642. https://doi.org/https://doi.org/10.1038/s41467-018-03094-2
- Feng, X., Fan, J., Li, A., & Li, G. (2019). Multireusable thermoset with anomalous flame-triggered shape memory effect. ACS Applied Materials & Interfaces, 11(17), 16075–16086. https://doi.org/https://doi.org/10.1021/acsami.9b03092
- Feng, X., & Li, G. (2020). Versatile phosphate diester-based flame retardant vitrimers via catalyst-free mixed transesterification. ACS Applied Materials & Interfaces, 12(51), 57486–57496. https://doi.org/https://doi.org/10.1021/acsami.0c18852
- Foster, V. R. (1987). Polymers in caulking and sealant materials. Journal of Chemical Education, 64(10), 861–865. https://doi.org/https://doi.org/10.1021/ed064p861
- Fried, A., Malladi, H., & Castorena, C. (2019). Impact of crack sealant on pavement skid resistance. Transportation Research Record: Journal of the Transportation Research Board, 2673(7), 362–370. https://doi.org/https://doi.org/10.1177/0361198119849590
- Guo, M., Tan, Y., Du, X., & Lv, Z. (2017). Study on the cohesion and adhesion of hot-poured crack sealants. Frontiers of Structural and Civil Engineering, 11(3), 353–359. https://doi.org/https://doi.org/10.1007/s11709-017-0400-3
- Hager, M., Bode, S., Weber, C., & Schubert, U. (2015). Shape memory polymers: Past, present and future developments. Progress in Polymer Science, 49-50, 3–33. https://doi.org/https://doi.org/10.1016/j.progpolymsci.2015.04.002
- Haghayegh, M., & Mir Mohamad Sadeghi, G. (2012). Synthesis of shape memory polyurethane/clay nanocomposites and analysis of shape memory, thermal, and mechanical properties. Polymer Composites, 33(6), 843–849. https://doi.org/https://doi.org/10.1002/pc.22191
- Herabat, P., & Kerdput, N. (2006). Analysis of damage mechanism of reinforced concrete pavement joint sealant. Transportation Research Record: Journal of the Transportation Research Board, 1958(1), 90–99. https://doi.org/https://doi.org/10.1177/0361198106195800111
- Hu, X., Zhou, F., Hu, S., & Scullion, T. (2011). A new laboratory evaluation method for the adhesive performance of crack sealants. Journal of Testing and Evaluation, 39(2), 177–183. https://doi.org/https://doi.org/10.1520/JTE102845
- Hu, J., Zhu, Y., Huang, H., & Lu, J. (2012). Recent advances in shape–memory polymers: Structure, mechanism, functionality, modeling and applications. Progress in Polymer Science, 37(12), 1720–1763. https://doi.org/https://doi.org/10.1016/j.progpolymsci.2012.06.001
- Huber, M. P., Kelch, S., & Berke, H. (2016). FTIR investigations on hydrolysis and condensation reactions of alkoxysilane terminated polymers for use in adhesives and sealants. International Journal of Adhesion and Adhesives, 64, 153–162. https://doi.org/https://doi.org/10.1016/j.ijadhadh.2015.10.014
- Ioannides, A., Long, A., & Minkarah, I. (2004). Joint sealant and structural performance at the Ohio Route 50 test pavement. Transportation Research Record: Journal of the Transportation Research Board, 1866(1), 28–35. https://doi.org/https://doi.org/10.3141/1866-04
- Jancar, J., Douglas, J. F., Starr, F. W., Kumar, S. K., Cassagnau, P., Lesser, A. J., Sternstein, S. S., & Buehler, M. J. (2010). Current issues in research on structure–property relationships in polymer nanocomposites. Polymer, 51(15), 3321–3343. https://doi.org/https://doi.org/10.1016/j.polymer.2010.04.074
- John, M., & Li, G. (2010). Self-healing of sandwich structures with a grid stiffened shape memory polymer syntactic foam core. Smart Materials and Structures, 19(7), 075013(1-12). https://doi.org/https://doi.org/10.1088/0964-1726/19/7/075013
- Kendall, B. R. F. (1982). Anaerobic polymers as high vacuum leak sealants. Journal of Vacuum Science and Technology, 20(2), 248–249. https://doi.org/https://doi.org/10.1116/1.571276
- Kiliaris, P., Papaspyrides, C. D., & Pfaendner, R. (2009). Influence of accelerated aging on clay-reinforced polyamide 6. Polymer Degradation and Stability, 94(3), 389–396. https://doi.org/https://doi.org/10.1016/j.polymdegradstab.2008.11.016
- Kubit, A., Wydrzynski, D., & Trzepiecinski, T. (2018). Refill friction stir spot welding of 7075-T6 aluminium alloy single-lap joints with polymer sealant interlayer. Composite Structures, 201, 389–397. https://doi.org/https://doi.org/10.1016/j.compstruct.2018.06.070
- Lee, S. W., & Stoffels, S. M. (2003). Effects of excessive pavement joint opening and freezing on sealants. Journal of Transportation Engineering, 129(4), 444–450. https://doi.org/https://doi.org/10.1061/(ASCE)0733-947X(2003)129:4(444)
- Lendlein, A., & Kelch, S. (2002). Shape-memory polymers. Angewandte Chemie International Edition, 41(12), 2034–2057. https://doi.org/https://doi.org/10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M
- Li, G. (2014). Self-healing composites: Shape memory polymer based structures. West Sussex, UK: John Wiley & Sons, Inc.
- Li, G. (2020). Liquid sealant with thermally adaptive properties. US Patent No. 10,633,541 B2.
- Li, Q., Crowley, R. W., Bloomquist, D. B., & Roque, R. (2012). The creep testing apparatus (CRETA): A new testing device for measuring the viscoelasticity of joint sealant. Journal of Testing and Evaluation, 40(3), 387-25. https://doi.org/https://doi.org/10.1520/JTE104431
- Li, Q., Crowley, R. W., Bloomquist, D. B., & Roque, R. (2014b). Newly developed adhesive strength test for measuring the strength of sealant between joints of concrete pavement. Journal of Materials in Civil Engineering, 26(12), 04014097. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001020
- Li, F., Du, Y., & Li, L. (2017b). Viscoelastic model and stress relaxation evaluation of pavement crack sealants at low temperature. Journal of Materials in Civil Engineering, 29(9), 04017135. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001982
- Li, A., Fan, J., & Li, G. (2018). Recyclable thermoset shape memory polymers with high stress and energy output via facile UV-curing. Journal of Materials Chemistry A, 6(24), 11479–11487. https://doi.org/https://doi.org/10.1039/C8TA02644K
- Li, F., Huang, S. C., Xu, J., & Qin, Y. C. (2009). Performance evaluation and technical requirement of sealant and filler in asphalt pavement., Journal of Traffic and Transportation Engineering, 9, 7–11. (In Chinese).
- Li, G., Ji, G., & Meng, H. (2015b). Shape memory polymer-based sealant for a compression sealed joint. Journal of Materials in Civil Engineering, 27(6), 04014196. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001150
- Li, G., & John, M. (2008). A self-healing smart syntactic foam under multiple impacts. Composites Science and Technology, 68(15-16), 3337–3343. https://doi.org/https://doi.org/10.1016/j.compscitech.2008.09.009
- Li, G., King, A., Xu, T., & Huang, X. (2013). Behavior of thermoset shape memory polymer-based syntactic foam sealant trained by hybrid two-stage programming. Journal of Materials in Civil Engineering, 25(3), 393–402. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000572
- Li, F., Li, L., & Li, T. (2015a). Viscosity Evaluation index of Hot-applied sealant for asphalt pavement. Transportation Research Record: Journal of the Transportation Research Board, 2481(1), 83–89. https://doi.org/https://doi.org/10.3141/2481-11
- Li, F., Li, T., & Shi, X. (2014a). Evaluation on high-temperature adhesion performance of hot-applied sealant for asphalt pavement. Journal of Wuhan University of Technology-Mater. Sci. Ed, 29(6), 1237–1241. https://doi.org/https://doi.org/10.1007/s11595-014-1074-5
- Li, Y., & Mao, S. (1996). Study on the properties and application of epoxy resin/polyurethane semi-interpenetrating polymer networks. Journal of Applied Polymer Science, 61(12), 2059–2063. https://doi.org/https://doi.org/10.1002/(SICI)1097-4628(19960919)61:12<2059::AID-APP2>3.0.CO;2-9
- Li, G., & Nettles, D. (2010). Thermomechanical characterization of a shape memory polymer based self-repairing syntactic foam. Polymer, 51(3), 755–762. https://doi.org/https://doi.org/10.1016/j.polymer.2009.12.002
- Li, K., Peng, J., Zhang, M., Heng, J., Li, D., & Mu, C. (2015b). Comparative study of the effects of anatase and rutile titanium dioxide nanoparticles on the structure and properties of waterborne polyurethane. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 470, 92–99. https://doi.org/https://doi.org/10.1016/j.colsurfa.2015.01.072
- Li, B., Ren, X., Li, Y., Ma, W., & Li, H. (2017a). Evaluation and selection of sealants and fillers using principal component analysis for cracks in asphalt concrete pavements. Journal of Wuhan University of Technology-Mater. Sci. Ed, 32(2), 408–412. https://doi.org/https://doi.org/10.1007/s11595-017-1611-0
- Li, G., & Uppu, N. (2010). Shape memory polymer based self-healing syntactic foam: 3-D confined thermomechanical characterization. Composites Science and Technology, 70(9), 1419–1427. https://doi.org/https://doi.org/10.1016/j.compscitech.2010.04.026
- Li, G., & Wang, A. (2016). Cold, warm, and hot programming of shape memory polymers. Journal of Polymer Science Part B: Polymer Physics, 54(14), 1319–1339. https://doi.org/https://doi.org/10.1002/polb.24041
- Li, G., & Xu, T. (2011a). Thermomechanical characterization of shape memory polymer-based self-healing syntactic foam sealant for expansion joints. Journal of Transportation Engineering, 137(11), 805–814. https://doi.org/https://doi.org/10.1061/(ASCE)TE.1943-5436.0000279
- Li, G., & Xu, W. (2011b). Thermomechanical behavior of thermoset shape memory polymer programmed by cold-compression: Testing and constitutive modeling. Journal of the Mechanics and Physics of Solids, 59(6), 1231–1250. https://doi.org/https://doi.org/10.1016/j.jmps.2011.03.001
- Linde, S., & Johansson, U. (1992). Thermo-oxidative degradation of polymer modified bitumen. In K. R. Wardlaw & S. Shuler (Eds.), (pp. 244–253). ASTM International.
- Liu, S., Mo, L., Wang, K., Xie, Y., & Woldekidan, M. F. (2016). Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints. Construction and Building Materials, 105, 1–13. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.12.017
- Liu, H., Wang, H., Zhuang, C., Liu, Y., & Yin, J. (2013). Preparation of EA/PU IPN grouting material and its performances research. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 44(8), 3129–3136.
- Lu, L., Cao, J., & Li, G. (2017a). A polycaprolactone-based syntactic foam with bidirectional reversible actuation. Journal of Applied Polymer Science, 134(34), 45225(1-12). https://doi.org/https://doi.org/10.1002/app.45225
- Lu, L., Cao, J., & Li, G. (2018). Giant reversible elongation upon cooling and contraction upon heating for a crosslinked cis poly(1,4-butadiene) system at temperatures below zero celsius. Scientific Reports, 8(1), 14233(1-9). https://doi.org/https://doi.org/10.1038/s41598-018-32436-9
- Lu, L., Fan, J., & Li, G. (2016). Intrinsic healable and recyclable thermoset epoxy based on shape memory effect and transesterification reaction. Polymer, 105, 10–18. https://doi.org/https://doi.org/10.1016/j.polymer.2016.10.013
- Lu, L., & Li, G. (2016). One-way multishape-memory effect and tunable two-way shape memory effect of ionomer poly(ethylene-co-methacrylic acid). ACS Applied Materials & Interfaces, 8(23), 14812–14823. https://doi.org/https://doi.org/10.1021/acsami.6b04105
- Lu, L., Pan, J., & Li, G. (2017b). Recyclable high-performance epoxy based on transesterification reaction. Journal of Materials Chemistry A, 5(40), 21505–21513. https://doi.org/https://doi.org/10.1039/C7TA06397K
- Lynch, L. N., & Janssen, D. J. (1998). Pavement joint sealant specifications – past, present, and future. Journal of Elastomers & Plastics, 30(2), 161–181. https://doi.org/https://doi.org/10.1177/009524439803000205
- Mahler, B. J., Metre, P. C. V., Crane, J. L., Watts, A. W., Scoggins, M., & Williams, E. S. (2012). Coal-Tar-Based pavement Sealcoat and PAHs: Implications for the environment, human health, and stormwater management. Environmental Science & Technology, 46(6), 3039–3045. https://doi.org/https://doi.org/10.1021/es203699x
- Mahler, B. J., Van Metre, P. C., Bashara, T. J., Wilson, J. T., & Johns, D. A. (2005). Parking Lot sealcoat: An unrecognized source of urban polycyclic aromatic hydrocarbons. Environmental Science & Technology, 39(15), 5560–5566. https://doi.org/https://doi.org/10.1021/es0501565
- Malla, R. B., Shaw, M. T., Shrestha, M. R., & Brijmohan, S. B. (2007). Development and Laboratory analysis of silicone foam sealant for bridge expansion joints. Journal of Bridge Engineering, 12(4), 438–448. https://doi.org/https://doi.org/10.1061/(ASCE)1084-0702(2007)12:4(438)
- Malla, R. B., Shrestha, M. R., Shaw, M. T., Brijmohan, S. B., Aging, T., & Compression Recovery, C. (2011). Temperature aging, compression recovery, creep, and weathering of a foam silicone sealant for bridge expansion joints. Journal of Materials in Civil Engineering, 23(3), 287–297. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0000166
- Masson, J. F. (1997). Effective sealing of pavement cracks in cold urban environments. National Research Council Canada. Institute for Research in Construction.
- Masson, J. F., Collins, P., & Légaré P -P. (1999). Performance of pavement crack sealants in cold urban conditions. Canadian Journal of Civil Engineering, 26(4), 395–401. https://doi.org/https://doi.org/10.1139/l99-003
- Masson, J. F., Collins, P., & Lowery, M. (2005). Temperature control of hot-poured sealants during the sealing of pavement cracks. Construction and Building Materials, 19(6), 423–429. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2004.09.001
- Masson, J.-F., Collins, P., Margeson, J., & Polomark, G. (2002). Analysis of bituminous crack sealants by physicochemical methods: Relationship to field performance. Transportation Research Record: Journal of the Transportation Research Board, 1795(1), 33–39. https://doi.org/https://doi.org/10.3141/1795-04
- Masson, J. F., Collins, P., Perraton, D., & Al-Qadi, I. (2007). Rapid assessment of the tracking resistance of bituminous crack sealants. Canadian Journal of Civil Engineering, 34(1), 126–131. https://doi.org/https://doi.org/10.1139/l06-120
- Masson, J.-F., & Lacasse, M. A. (1999). Effect of hot-air lance on crack sealant adhesion. Journal of Transportation Engineering, 125(4), 357–363. https://doi.org/https://doi.org/10.1061/(ASCE)0733-947X(1999)125:4(357)
- Masson, J.-F., Lauzier, C., Collins, P., & Lacasse, M. A. (1998). Sealant degradation during crack sealing of pavements. Journal of Materials in Civil Engineering, 10(4), 250–255. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(1998)10:4(250)
- Meng, Q., & Hu, J. (2009). A review of shape memory polymer composites and blends. Composites Part A: Applied Science and Manufacturing, 40(11), 1661–1672. https://doi.org/https://doi.org/10.1016/j.compositesa.2009.08.011
- Menon, A. V., Madras, G., & Bose, S. (2019). The journey of self-healing and shape memory polyurethanes from bench to translational research. Polymer Chemistry, 10(32), 4370–4388. https://doi.org/https://doi.org/10.1039/C9PY00854C
- Nji, J., & Li, G. (2010a). A biomimic shape memory polymer based self-healing particulate composite. Polymer, 51(25), 6021–6029. https://doi.org/https://doi.org/10.1016/j.polymer.2010.10.021
- Nji, J., & Li, G. (2010b). A self-healing 3D woven fabric reinforced shape memory polymer composite for impact mitigation. Smart Materials and Structures, 19(3), 035007(1-9). https://doi.org/https://doi.org/10.1088/0964-1726/19/3/035007
- Nji, J., & Li, G. (2012). Damage healing ability of a shape-memory-polymer-based particulate composite with small thermoplastic contents. Smart Materials and Structures, 21(2), 025011(1-10). https://doi.org/https://doi.org/10.1088/0964-1726/21/2/025011
- Odum-Ewuakye, B., & Attoh-Okine, N. (2006). Sealing system selection for jointed concrete pavements – a review. Construction and Building Materials, 20(8), 591–602. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2005.01.042
- Ozer, H., Solanki, P., Yousefi, S., & Al-Qadi, I. (2014). Field validation of laboratory-predicted Low-temperature performance of hot-poured crack sealants. Transportation Research Record: Journal of the Transportation Research Board, 2431(1), 57–66. https://doi.org/https://doi.org/10.3141/2431-08
- Ozer, H., Yousefi, S., Al-Qadi, I., & Elizalde-Castro, G. (2015). Field aging and development of aging model for Hot-poured crack sealants. Transportation Research Record: Journal of the Transportation Research Board, 2481(1), 90–99. https://doi.org/https://doi.org/10.3141/2481-12
- Pavlowsky, R. T. (2013). Coal-tar pavement sealant use and polycyclic aromatic hydrocarbon contamination in urban stream sediments. Physical Geography, 34(4-5), 392–415. https://doi.org/https://doi.org/10.1080/02723646.2013.848393
- Petersen D. R., Rogers, A. D., Lee-Sullivan, P., & Bremner, T. (1998). A method of fatigue testing of concrete highway joint sealants in shear. Journal of Testing and Evaluation, 26(3), 234–239. https://doi.org/https://doi.org/10.1520/JTE11996J
- Peterson, D. E. (1982). Resealing joints and cracks in rigid and flexible pavements. Synthesis Rep. 98. Nat. Cooperative Hwy. Res. Program.
- Rodriguez, E. D., Luo, X., & Mather, P. T. (2011). Linear/network poly(ϵ-caprolactone) blends exhibiting shape memory assisted self-healing (SMASH). ACS Applied Materials & Interfaces, 3(2), 152–161. https://doi.org/https://doi.org/10.1021/am101012c
- Rogers, A., Lee-Sullivan, P., & Bremner, T. (1999b). Selecting Concrete Pavement Joint Sealants. II: Case study. Journal of Materials in Civil Engineering, 11(4), 309–316. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(309)
- Rogers, A. D., Lee-Sullivan, P., & Bremner, T. W. (1999a). Selecting Concrete Pavement Joint Sealants. I: Proposed test protocol. Journal of Materials in Civil Engineering, 11(4), 302–308. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(302)
- Rosendahl, P. L., Staudt, Y., Schneider, A. P., Schneider, J., & Becker, W. (2019). Nonlinear elastic finite fracture mechanics: Modeling mixed-mode crack nucleation in structural glazing silicone sealants. Materials & Design, 182, 108057(1-16). https://doi.org/https://doi.org/10.1016/j.matdes.2019.108057
- Ryu, S.W., Lin, W., & Cho, Y.-H. (2018). Experimental and numerical evaluations on the shape factor of silicone sealant for concrete pavements under vertical loading. Journal of Performance of Constructed Facilities, 32(4), 04018032. https://doi.org/https://doi.org/10.1061/(ASCE)CF.1943-5509.0001167
- Sawalha, M., Ozer, H., Al-Qadi, I. L., & Xue, H. (2017). Development of a modified adhesion test for Hot-poured asphalt crack sealants. Transportation Research Record: Journal of the Transportation Research Board, 2612(1), 85–95. https://doi.org/https://doi.org/10.3141/2612-10
- Scoggins, M., McClintock, N. L., Gosselink, L., & Bryer, P. (2007). Occurrence of polycyclic aromatic hydrocarbons below coal-tar-sealed parking lots and effects on stream benthic macroinvertebrate communities. Journal of the North American Benthological Society, 26(4), 694–707. https://doi.org/https://doi.org/10.1899/06-109.1
- Shen, D., Shi, S., & Xu, T. (2018a). Synthesis and performance Evaluation of epoxy resin–modified shape memory polyurethane sealant. Journal of Testing and Evaluation, 46(4), 1452–1461. https://doi.org/https://doi.org/10.1520/JTE20170298
- Shen, D., Shi, S., Xu, T., Huang, X., Liao, G., & Chen, J. (2018b). Development of shape memory polyurethane based sealant for concrete pavement. Construction and Building Materials, 174, 474–483. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.04.154
- Smith, K. L., & Romine, A. R. (1993). Innovative materials development and testing. volume 3: treatment of cracks in asphalt concretesurfaced pavements. Rep. SHRP-H-354.
- Soliman, H., & Shalaby, A. (2009). Characterizing the low-temperature performance of hot-pour bituminous sealants using glass transition temperature and dynamic stiffness modulus. Journal of Materials in Civil Engineering, 21(11), 688–693. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2009)21:11(688)
- Soliman, H., Shalaby, A., & Eng, P. Evaluation of Joint and Crack Sealants Based on Cyclic Loading and Rheological Properties. 2007 Annual Conference of the Transportation Association of Canada 2007.
- Soliman, H., Shalaby, A., & Kavanagh, L. (2008). Performance evaluation of joint and crack sealants in cold climates using DSR and BBR tests. Journal of Materials in Civil Engineering, 20(7), 470–477. https://doi.org/https://doi.org/10.1061/(ASCE)0899-1561(2008)20:7(470)
- Stögbauer, H., & Wolf, A. T. (1991). The influence of heat ageing on one-part construction silicone sealants. Construction and Building Materials, 5(1), 27–32. https://doi.org/https://doi.org/10.1016/0950-0618(91)90029-K
- Tan, X. Y., Zhang, J. P., Guo, D., Sun, G. Q., Zhou, Y. Y., Zhang, W. W., & Guan, Y. S. (2020). Preparation, characterization and repeated repair ability evaluation of asphalt-based crack sealant containing microencapsulated epoxy resin and curing agent. Construction and Building Materials, 256, 119433(1-13). https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.119433
- Thakur, S., & Karak, N. (2015). Tuning of sunlight-induced self-cleaning and self-healing attributes of an elastomeric nanocomposite by judicious compositional variation of the TiO2–reduced graphene oxide nanohybrid. Journal of Materials Chemistry A, 3(23), 12334–12342. https://doi.org/https://doi.org/10.1039/C5TA02162F
- Tock, R. W., Chew, C. H., & Minor, J. E. (1987). Determination of the modulus of elasticity of structural silicone sealants. TTU-IDR-84D, National Science Foundation. http://hdl.handle.net/2346/61585.
- Van Metre, P. C., & Mahler, B. J. (2014). PAH concentrations in lake sediment decline following ban on coal-Tar-based pavement sealants in Austin, texas. Environmental Science & Technology, 48(13), 7222–7228. https://doi.org/https://doi.org/10.1021/es405691q
- Van Metre, P. C., Majewski, M. S., Mahler, B. J., Foreman, W. T., Braun, C. L., Wilson, J. T., & Burbank, T. L. (2012). PAH volatilization following application of coal-tar-based pavement sealant. Atmospheric Environment, 51, 108–115. https://doi.org/https://doi.org/10.1016/j.atmosenv.2012.01.036
- Ward, D. R. (1993). Evaluation of crack sealant performance on indiana's asphalt concrete surfaced pavements. Indiana Dept. of Transp., Ind.
- Why Sealant Joints Fail: Avoiding Sealant Application Failures. (2018). https://vinats.com/en/why-sealant-joints-fail-avoiding-sealant-application-failures/
- Wick, C. D., Peters, A. J., & Li, G. (2021). Quantifying the contributions of energy storage in a thermoset shape memory polymer with high stress recovery: A molecular dynamics study. Polymer, 213, 123319. https://doi.org/https://doi.org/10.1016/j.polymer.2020.123319
- Wilde, W. J., & Johnson, E. N. (2009). Effect of crack sealant material and reservoir geometry on surface roughness of bituminous overlays. Transportation Research Record: Journal of the Transportation Research Board, 2108(1), 69–74. https://doi.org/https://doi.org/10.3141/2108-08
- Williams, E. S., Mahler, B., & Van Metre, P. C. (2012). Coal-tar pavement sealants might substantially increase children's PAH exposures. Environmental Pollution, 164, 40–41. https://doi.org/https://doi.org/10.1016/j.envpol.2012.01.010
- Williams, E. S., Mahler, B. J., & Van Metre, P. C. (2013). Cancer risk from incidental ingestion exposures to PAHs associated with coal-tar-sealed pavement. Environmental Science & Technology, 47(2), 1101–1109. https://doi.org/https://doi.org/10.1021/es303371t
- Wu, H., Zhu, M., Liu, Z., & Yin, J. (2015). Developing a polymer-based crack repairing material using interpenetrate polymer network (IPN) technology. Construction and Building Materials, 84, 192–200. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.03.067
- Xu, T., & Li, G. (2011a). Cyclic stress-strain behavior of shape memory polymer based syntactic foam programmed by 2-D stress condition. Polymer, 52(20), 4571–4580. https://doi.org/https://doi.org/10.1016/j.polymer.2011.08.005
- Xu, T., & Li, G. (2011b). Durability of shape memory polymer based syntactic foam under accelerated hydrolytic ageing. Materials Science and Engineering: A, 528(24), 7444–7450. https://doi.org/https://doi.org/10.1016/j.msea.2011.06.055
- Xu, T., Li, G., & Pang, S.-S. (2011b). Effects of ultraviolet radiation on morphology and thermo-mechanical properties of shape memory polymer based syntactic foam. Composites Part A: Applied Science and Manufacturing, 42(10), 1525–1533. https://doi.org/https://doi.org/10.1016/j.compositesa.2011.07.005
- Xu, L., Shang, P., Xu, X. W., Herrick, A. M., Sgro, A., & Shou, C. Q. (2011a). Studies on synthesis and properties of novel polyurethane pavement joint sealant modified with polydimethysiloxane. Materials Research Innovations, 15(2), 150–155. https://doi.org/https://doi.org/10.1179/143307511X12998222919119
- Xue, H., Cao, L., Hou, X., & Tan, Y. (2018). Cohesive property evaluation of crack sealants using a low-temperature tensile tester. Journal of Testing and Evaluation, 46(5), 1983–1994. https://doi.org/https://doi.org/10.1520/JTE20160319.
- Yan, C., & Li, G. (2020). A mechanism-based four-chain constitutive model for enthalpy-driven thermoset shape memory polymers with finite deformation. Journal of Applied Mechanics, 87(6), 061007(1-10). https://doi.org/https://doi.org/10.1115/1.4046583
- Yan, C., Yang, Q., & Li, G. (2020). A phenomenological constitutive model for semicrystalline two-way shape memory polymers. International Journal of Mechanical Sciences, 177(105552), 1–14. https://doi.org/https://doi.org/10.1016/j.ijmecsci.2020.105552
- Yang, S.-H., Al-Qadi, I., McGraw, J., Masson, J. F., & McGhee, K. (2010). Threshold identification and Field Validation of performance-based guidelines to select Hot-poured crack sealants. Transportation Research Record: Journal of the Transportation Research Board, 2150(1), 87–95. https://doi.org/https://doi.org/10.3141/2150-11
- Yang, Q., Fan, J., & Li, G. (2016). Artificial muscles made of chiral two-way shape memory polymer fibers. Applied Physics Letters, 109(183701), 1–5. https://doi.org/https://doi.org/10.1063/1.4966231
- Yang, Q., & Li, G. (2016). A top-down multi-scale modeling for actuation response of polymeric artificial muscles. Journal of the Mechanics and Physics of Solids, 92, 237–259. https://doi.org/https://doi.org/10.1016/j.jmps.2016.04.007
- Yin, J., Pang, Q., Wu, H., & Song, W. (2018). Using a polymer-based sealant material to make crack repair of asphalt pavement. Journal of Testing and Evaluation, 46(5), 2056–2066. https://doi.org/https://doi.org/10.1520/JTE20170041
- Yun, T., Lee, O., Lee, S. W., Kim, I. T., & Cho, Y. H. (2011). A performance evaluation method of preformed joint sealant: Slip-down failure. Construction and Building Materials, 25(4), 1677–1684. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2010.10.015
- Zhang, Y., & Hourston, D. J. (1998). Rigid interpenetrating polymer network foams prepared from a rosin-based polyurethane and an epoxy resin. Journal of Applied Polymer Science, 69(2), 271–281. https://doi.org/https://doi.org/10.1002/(SICI)1097-4628(19980711)69:2<271::AID-APP8>3.0.CO;2-K
- Zhang, J., Manias, E., Polizos, G., Huh, J.-Y., Ophir, A., Songtipya, P., Del, M., & Jimenez-Gasco, M. D. M. (2009). Tailored polyethylene nanocomposite sealants: Broad-range peelable heat-seals through designed filler/polymer interfaces. Journal of Adhesion Science and Technology, 23(5), 709–737. https://doi.org/https://doi.org/10.1163/156856108X379182
- Zhang, P., Ogunmekan, B., Ibekwe, S., Jerro, D., Pang, S.-S., & Li, G. (2016). Healing of shape memory polyurethane fiber-reinforced syntactic foam subjected to tensile stress. Journal of Intelligent Material Systems and Structures, 27(13), 1792–1801. https://doi.org/https://doi.org/10.1177/1045389X15610912
- Zimmer, T., Carpenter, S., & Darter, M. (1984). Field performance of a low-modulus silicone highway joint sealant. Transportation Research Record, 990, 31–37. http://worldcat.org/isbn/0309037743
- Zohrevand, A., Ajji, A., & Mighri, F. (2014). Morphology and properties of highly filled iPP/TiO2 nanocomposites. Polymer Engineering & Science, 54(4), 874–886. https://doi.org/https://doi.org/10.1002/pen.23625.