References
- Aguiar-Moya, J. P., Salazar-Delgado, J., Baldi-Sevilla, A., Leiva-Villacorta, F., & Loria-Salazar, L. (2015). Effect of aging on adhesion properties of asphalt mixtures with the use of bitumen bond strength and surface energy measurement tests. Transportation Research Record: Journal of the Transportation Research Board, 2505(1), 57–65. https://doi.org/https://doi.org/10.3141/2505-08
- Al-Qadi, I. L., Aurangzeb, Q., Carpenter, S. H., Pine, W. J., & Trepanier, J. (2012). Impact of high RAP contents on structural and performance properties of asphalt mixtures (No. 0197-9191).
- Bhasin, A., Little, D. N., Vasconcelos, K. L., & Masad, E. (2007). Surface free energy to identify moisture sensitivity of materials for asphalt mixes. Transportation Research Record: Journal of the Transportation Research Board, 2001(1), 37–45. https://doi.org/https://doi.org/10.3141/2001-05
- Bowers, B. F., Huang, B., Shu, X., & Miller, B. C. (2014). Investigation of reclaimed asphalt pavement blending efficiency through GPC and FTIR. Construction and Building Materials, 50, 517–523. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.10.003
- Chen, Z., Pei, J., Li, R., & Xiao, F. (2018). Performance characteristics of asphalt materials based on molecular dynamics simulation – A review. Construction and Building Materials, 189, 695–710. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.09.038
- Chen, C., Zhang, N., Li, W., & Song, Y. (2015). Water contact angle dependence with hydroxyl functional groups on silica surfaces under CO2 sequestration conditions. Environmental Science & Technology, 49(24), 14680–14687. https://doi.org/https://doi.org/10.1021/acs.est.5b03646
- Cheng, D., Little, D. N., Lytton, R. L., & Holste, J. C. (2002a). Surface energy measurement of asphalt and its application to predicting fatigue and healing in asphalt mixtures. Transportation Research Record, 1810(1), 44–53. https://doi.org/https://doi.org/10.3141/1810-06
- Cheng, D., Little, D. N., Lytton, R. L., & Holste, J. C. (2002b). Use of surface free energy properties of the asphalt-aggregate system to predict moisture damage potential. Journal of the Association of Asphalt Paving Technologists, 71, 59–88.
- Corbett, L. (1964). Densimetric method for characterizing asphalt. Analytical Chemistry, 36(10), 1967–1971. https://doi.org/https://doi.org/10.1021/ac60216a024
- Corbett, L. W. (1969). Composition of asphalt based on generic fractionation, using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization. Analytical Chemistry, 41(4), 576–579. https://doi.org/https://doi.org/10.1021/ac60273a004
- Cui, B., Gu, X., Hu, D., & Dong, Q. (2020). A multiphysics evaluation of the rejuvenator effects on aged asphalt using molecular dynamics simulations. Journal of Cleaner Production, 259, 120629. https://doi.org/https://doi.org/10.1016/j.jclepro.2020.120629
- Das, P. K., Baaj, H., Kringos, N., & Tighe, S. (2015). Coupling of oxidative ageing and moisture damage in asphalt mixtures. Road Materials and Pavement Design, 16(sup1), 265–279. https://doi.org/https://doi.org/10.1080/14680629.2015.1030835
- Ding, X., Chen, L., Ma, T., Ma, H., Gu, L., Chen, T., & Ma, Y. (2019). Laboratory investigation of the recycled asphalt concrete with stable crumb rubber asphalt binder. Construction and Building Materials, 203, 552–557. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.01.114
- Dong, Z., Liu, Z., Wang, P., & Gong, X. (2017). Nanostructure characterization of asphalt-aggregate interface through molecular dynamics simulation and atomic force microscopy. Fuel, 189, 155–163. https://doi.org/https://doi.org/10.1016/j.fuel.2016.10.077
- dos Santos, S., Partl, M. N., & Poulikakos, L. D. (2014). Newly observed effects of water on the microstructures of bitumen surface. Construction and Building Materials, 71, 618–627. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2014.08.076
- Fallah, F., Khabaz, F., Kim, Y.-R., Kommidi, S. R., & Haghshenas, H. F. (2019). Molecular dynamics modeling and simulation of bituminous binder chemical aging due to variation of oxidation level and saturate-aromatic-resin-asphaltene fraction. Fuel, 237, 71–80. https://doi.org/https://doi.org/10.1016/j.fuel.2018.09.110
- Gong, M., Zhu, H., Pauli, T., Yang, J., Wei, J., & Yao, Z. (2017). Evaluation of bio-binder modified asphalt’s adhesion behavior using sessile drop device and atomic force microscopy. Construction and Building Materials, 145, 42–51. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.03.114
- Guo, M., Tan, Y., & Wei, J. (2018). Using molecular dynamics simulation to study concentration distribution of asphalt binder on aggregate surface. Journal of Materials in Civil Engineering, 30(5), 04018075. https://doi.org/https://doi.org/10.1061/(asce)mt.1943-5533.0002258
- Hu, D., Gu, X., Cui, B., Pei, J., & Zhang, Q. (2020). Modeling the oxidative aging kinetics and pathways of asphalt: A ReaxFF molecular dynamics study. Energy & Fuels, 34(3), 3601–3613. https://doi.org/https://doi.org/10.1021/acs.energyfuels.9b03740
- Hung, A. M., Goodwin, A., & Fini, E. H. (2017). Effects of water exposure on bitumen surface microstructure. Construction and Building Materials, 135, 682–688. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.01.002
- Kim, H. H., Mazumder, M., & Lee, S.-J. (2017). Micromorphology and rheology of warm binders depending on aging. Journal of Materials in Civil Engineering, 29(11), 04017226. https://doi.org/https://doi.org/10.1061/(asce)mt.1943-5533.0002082
- Leite, F. L., Bueno, C. C., Da Róz, A. L., Ziemath, E. C., & Oliveira, O. N. (2012). Theoretical models for surface forces and adhesion and their measurement using atomic force microscopy. International Journal of Molecular Sciences, 13(10), 12773–12856. https://doi.org/https://doi.org/10.3390/ijms131012773
- Li, D. D., & Greenfield, M. L. (2014). Chemical compositions of improved model asphalt systems for molecular simulations. Fuel, 115, 347–356. https://doi.org/https://doi.org/10.1016/j.fuel.2013.07.012
- Liu, G., Nielsen, E., Komacka, J., Leegwater, G., & van de Ven, M. (2015). Influence of soft bitumens on the chemical and rheological properties of reclaimed polymer-modified binders from the “old” surface-layer asphalt. Construction and Building Materials, 79, 129–135. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2015.01.002
- Moraes, R., Velasquez, R., & Bahia, H. (2017). Using bond strength and surface energy to estimate moisture resistance of asphalt-aggregate systems. Construction and Building Materials, 130, 156–170. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.10.043
- Oyekunle, L. O. (2007). Certain relationships between chemical composition and properties of petroleum asphalts from different origin. Oil & Gas Science and Technology - Revue de l'IFP, 61(3), 433–441. https://doi.org/https://doi.org/10.2516/ogst:2006043a
- Petersen, J. C. (2000). Chemical composition of asphalt as related to asphalt durability. In T. F. Yen & G. V. Chilingarian (Eds.), Developments in petroleum science (Vol. 40, pp. 363–399). Elsevier. https://doi.org/https://doi.org/10.1016/S0376-7361(09)70285-7
- Poulikakos, L. D., Wang, D., Porot, L., & Hofko, B. (2019). Impact of asphalt aging temperature on chemo-mechanics. Rsc Advances, 9(21), 11602–11613. https://doi.org/https://doi.org/10.1039/c9ra00645a
- Qu, X., Liu, Q., Guo, M., Wang, D., & Oeser, M. (2018). Study on the effect of aging on physical properties of asphalt binder from a microscale perspective. Construction and Building Materials, 187, 718–729. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.07.188
- Rebelo, L. M., de Sousa, J. S., Abreu, A. S., Baroni, M. P. M. A., Alencar, A. E. V., Soares, S. A., Mendes Filho, J., & Soares, J. B. (2014). Aging of asphaltic binders investigated with atomic force microscopy. Fuel, 117, 15–25. https://doi.org/https://doi.org/10.1016/j.fuel.2013.09.018
- Sharma, B. K., Ma, J., Kunwar, B., Singhvi, P., Ozer, H., & Rajagopalan, N. (2017). Modeling the performance properties of RAS and RAP blended asphalt mixes using chemical compositional information (No. 0197-9191).
- Sun, H., Jin, Z., Yang, C., Akkermans, R. L., Robertson, S. H., Spenley, N. A., Miller, S., & Todd, S. M. (2016). COMPASS II: Extended coverage for polymer and drug-like molecule databases. Journal of Molecular Modeling, 22(2), 47. https://doi.org/https://doi.org/10.1007/s00894-016-2909-0
- Sun, W., & Wang, H. (2020). Moisture effect on nanostructure and adhesion energy of asphalt on aggregate surface: A molecular dynamics study. Applied Surface Science, 510, article number 145435. https://doi.org/https://doi.org/10.1016/j.apsusc.2020.145435
- Tan, Y., & Guo, M. (2013). Using surface free energy method to study the cohesion and adhesion of asphalt mastic. Construction and Building Materials, 47, 254–260. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.05.067
- Vinet-Cantot, J., Gaudefroy, V., Delfosse, F., Chailleux, E., & Crews, E. (2019). Stripping at the bitumen–aggregate interface: A laboratory method To assess the loss of chemical adhesion. Energy & Fuels, 33(4), 2641–2650. https://doi.org/https://doi.org/10.1021/acs.energyfuels.8b03410
- Wang, H., Lin, E., & Xu, G. (2017). Molecular dynamics simulation of asphalt-aggregate interface adhesion strength with moisture effect. International Journal of Pavement Engineering, 18(5), 414–423. https://doi.org/https://doi.org/10.1080/10298436.2015.1095297
- Wu, S., Pang, L., Mo, L., Chen, Y., & Zhu, G. (2009). Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen. Construction and Building Materials, 23(2), 1005–1010. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2008.05.004
- Xu, G., & Wang, H. (2016a). Molecular dynamics study of interfacial mechanical behavior between asphalt binder and mineral aggregate. Construction and Building Materials, 121, 246–254. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.05.167
- Xu, G., & Wang, H. (2016b). Study of cohesion and adhesion properties of asphalt concrete with molecular dynamics simulation. Computational Materials Science, 112, 161–169. https://doi.org/https://doi.org/10.1016/j.commatsci.2015.10.024
- Xu, G., & Wang, H. (2017). Molecular dynamics study of oxidative aging effect on asphalt binder properties. Fuel, 188, 1–10. https://doi.org/https://doi.org/10.1016/j.fuel.2016.10.021
- Yu, X., Burnham, N. A., Mallick, R. B., & Tao, M. (2013). A systematic AFM-based method to measure adhesion differences between micron-sized domains in asphalt binders. Fuel, 113, 443–447. https://doi.org/https://doi.org/10.1016/j.fuel.2013.05.084
- Yu, X., Granados-Focil, S., Tao, M., & Burnham, N. A. (2017). Time-and composition-dependent evolution of distinctive microstructures in bitumen. Energy & Fuels, 32(1), 67–80. https://doi.org/https://doi.org/10.1021/acs.energyfuels.7b02467
- Zhai, R., & Hao, P. (2020). Research on the impact of mineral type and bitumen ageing process on asphalt-mineral adhesion performance based on molecular dynamics simulation method. Road Materials and Pavement Design, 1–14. https://doi.org/https://doi.org/10.1080/14680629.2020.1739119
- Zhang, H., Cheng, Y.-T., Vispute, T. P., Xiao, R., & Huber, G. W. (2011). Catalytic conversion of biomass-derived feedstocks into olefins and aromatics with ZSM-5: The hydrogen to carbon effective ratio. Energy & Environmental Science, 4(6), 2297–2307. https://doi.org/https://doi.org/10.1039/c1ee01230d
- Zhang, L., & Greenfield, M. L. (2007). Analyzing properties of model asphalts using molecular simulation. Energy & Fuels, 21(3), 1712–1716. https://doi.org/https://doi.org/10.1021/ef060658j
- Zhou, Z., Gu, X., Dong, Q., Ni, F., & Jiang, Y. (2019). Rutting and fatigue cracking performance of SBS-RAP blended binders with a rejuvenator. Construction and Building Materials, 203, 294–303. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.01.119
- Zhou, Z., Gu, X., Dong, Q., Ni, F., & Jiang, Y. (2020). Investigation of the oxidation ageing of RAP asphalt blend binders and mixtures. International Journal of Pavement Engineering, 1–17. https://doi.org/https://doi.org/10.1080/10298436.2020.1763345