References
- Al-Qadi, I. L., Elseifi, M. A., Yoo, P. J., Dessouky, S. H., Gibson, N., Harman, T., … Petros, K. (2008). Accuracy of current complex modulus selection procedure from vehicular load pulse: NCHRP project 1-37A mechanistic-empirical pavement design guide. Transportation Research Record: Journal of the Transportation Research Board, 2087(1), 81–90. https://doi.org/https://doi.org/10.3141/2087-09
- Ceylan, H., Gopalakrishnan, K., Kim, S., Taylor, P., Alhasan, A. A., & Yang, S. (2016). Impact of curling and warping on concrete pavement.
- Cheng, H., Liu, L., Sun, L., Li, Y., & Hu, Y. (2020). Comparative analysis of strain-pulse-based loading frequencies for three types of asphalt pavements via field tests with moving truck axle loading. Construction and Building Materials, 247, 118519. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.118519
- Farhan, A. H., Dawson, A., & Thom, N. (2019). Behaviour of rubberised cement-bound aggregate mixtures containing different stabilisation levels under static and cyclic flexural loading. Road Materials and Pavement Design, 21(8), 1–20. https://doi.org/https://doi.org/10.1080/14680629.2019.1605924
- Feldman, R. F., & Sereda, P. J. (1970). A new model for hydrated Portland cement and its practical implications. Engineering Journal, 53(8–9), 53–59.
- Fwa, T. F., & Ong, G. P. (2006). Transverse pavement grooving against hydroplaning. II: Design. Journal of Transportation Engineering, 132(6), 449–457. https://doi.org/https://doi.org/10.1061/(ASCE)0733-947X(2006)132:6(449)
- Gholampour, A., Fallah Pour, A., Hassanli, R., & Ozbakkaloglu, T. (2019). Behavior of actively confined rubberized concrete under cyclic axial compression. Journal of Structural Engineering, 145(11), 04019131. https://doi.org/https://doi.org/10.1061/(ASCE)ST.1943-541X.0002434
- Golewski, G. L. (2018). Evaluation of morphology and size of cracks of the interfacial transition zone (ITZ) in concrete containing fly ash (FA). Journal of Hazardous Materials, 357, 298–304. https://doi.org/https://doi.org/10.1016/j.jhazmat.2018.06.016
- Guo, Y., Chen, Z., Qin, X., Shen, A., Zhou, S., & Lyu, Z. (2018). Evolution mechanism of microscopic pores in pavement concrete under multi-field coupling. Construction and Building Materials, 173, 381–393. https://doi.org/https://doi.org/10.1016/j.conbui-ldmat.2018.04.022
- Guo, Y., Xiao, H., Shen, A., & Zheng, P. (2019). Field test and calculation of cement on surface dynamic water pressure concrete pavement. Bulletin of the Chinese Ceramic Society, 22(3), 729–736. https://doi.org/https://doi.org/10.16552/j.cnki.issn1001-1625.2019.03.022
- Horne, W. B., & Dreher, R. C. (1963). Phenomena of pneumatic tire hydroplaning (Vol. 2056). National Aeronautics and Space Administration.
- Joshi, A. P., Mehta, Y. A., & Cleary, D. (2012). Effect of pavement damping and aircraft speed on stress-based load transfer efficiency: Three-dimensional finite element analysis. Transportation Research Record: Journal of the Transportation Research Board, 2300(1), 75–82. https://doi.org/https://doi.org/10.3141/2300-09
- JTG D40-2011, National Standard of the People’s Republic of China. (2011). Specifications for Design of Highway Cement Concrete Pavement (Chinese).
- JTG/T F30-2014, National Standard of the People’s Republic of China. (2014). Technical Guidelines for Construction of Highway Cement Concrete Pavement (Chinese).
- Kodippily, S., Yeaman, J., Henning, T., & Tighe, S. (2020). Effects of extreme climatic conditions on pavement response. Road Materials and Pavement Design, 21(5), 1413–1425. https://doi.org/https://doi.org/10.1080/14680629.2018.1552620
- Kou, M., Liu, X., & Wang, Y. (2020). Study on rock fracture behavior under hydromechanical loading by 3-D digital reconstruction. Structural Engineering and Mechanics, 74(2), 283–296. https://doi.org/https://doi.org/10.12989/sem.2020.74.2.283
- Kupfer, H., Hilsdorf, H. K., & Rusch, H. (1969, August). Behavior of concrete under biaxial stresses. Journal Proceedings, 66(8), 656–666.
- Li, C., & Li, K. F. (2010). Moisture transport in concrete cover under drying-wetting cycles: Theory, experiment and modeling. Journal of the Chinese Ceramic Society, 38(7), 1151–1159. https://doi.org/https://doi.org/10.14062/j.issn.0454-5648.2010.07.027
- Li, Z., & Liu, Z. (2015). Review of concrete dynamic constitutive model. Journal of Tianjin University (Science and Technology, 48(10), 854–863. https://doi.org/https://doi.org/10.11784/tdxbz201412081
- Liu, P., Song, L., & Yu, Z. (2014). Water transport in concrete cover under different drying-wetting conditions. Zhongnan Daxue Xuebao, 45(8), 2830–2838.
- Lyu, Z., Guo, Y., Chen, Z., Shen, A., Qin, X., Yang, J., … Wang, Z. (2019). Research on shrinkage development and fracture properties of internal curing pavement concrete based on humidity compensation. Construction and Building Materials, 203, 417–431. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.01.115
- Lyu, Z., Shen, A., He, Z., Wang, W., Mo, S., Chen, Z., & Qin, X. (2020). Absorption characteristics and shrinkage mitigation of superabsorbent polymers in pavement concrete. International Journal of Pavement Engineering, 1–15. https://doi.org/https://doi.org/10.1080/10298436.2020.1742334
- Ottosen, N. S. (1977). A failure criterion for concrete. Journal of the Engineering Mechanics Division, 103(4), 527–535. https://doi.org/https://doi.org/10.1061/JMCEA3.0002248
- Ottosen, N. S., & Ristinmaa, M. (2005). The mechanics of constitutive modeling. Elsevier.
- Providakis, C. P., Triantafillou, T. C., Karabalis, D., Papanicolaou, A., Stefanaki, K., Tsantilis, A., & Tzoura, E. (2014). Simulation of PZT monitoring of reinforced concrete beams retrofitted with CFRP. Smart Structures and Systems, 14(5), 811–830. https://doi.org/https://doi.org/10.12989/sss.2014.14.5.811
- Rahimi-Aghdam, S., Rasoolinejad, M., & Bažant, Z. P. (2019). Moisture diffusion in unsaturated self-desiccating concrete with humidity-dependent permeability and nonlinear sorption isotherm. Journal of Engineering Mechanics, 145(5), 04019032. https://doi.org/https://doi.org/10.1061/(ASCE)EM.1943-7889.0001591
- Rowe, G., & Raposo, S. (2017). Load format comparison with StratCalc: A 3D finite element method pavement analysis model. Airfield and Highway Pavements, 2017, 107–118. https://doi.org/https://doi.org/10.1061/9780784480922.010
- Sadeghi, K., & Abdi, S. (2019). Constitutive Laws For Confined Concrete Subjected To Cyclic Loading: State-Of-The-Art.
- Saeed, F., Rahman, M., Chamberlain, D., & Collins, P. (2019). Asphalt surface damage due to combined action of water and dynamic loading. Construction and Building Materials, 196, 530–538. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.10.225
- Shafabakhsh, G., Kashi, E., & Tahani, M. (2018). Analysis of runway pavement response under aircraft moving load by FEM. Journal of Engineering, Design and Technology, 16(2), 233–243. https://doi.org/https://doi.org/10.1108/jedt-09-2017-0093.
- Shen, A. (2016). Cement and concrete. China Communications Press.
- Shen, A., Song, P., Guo, Y., & Li, P. (2018). Numerical simulation analysis of instantaneous dynamic water pressure on Road surface based on COMSOL multiphysics. Journal of South China University of Technology (Natural Science Edition), 46(11), 92–101. https://doi.org/https://doi.org/10.3969/j.issn.1000-565X.2018.11.013
- Tang, C., Lu, Z., Duan, Y., & Yao, H. (2020). Dynamic responses of the pavement-unsaturated poroelastic ground system to a moving traffic load. Transportation Geotechnics, 25, 100404. https://doi.org/https://doi.org/10.1016/j.trgeo.2020.100404
- Teich, L., Hütten, A., & Schröder, C. (2012). Utilization of COMSOL Multiphysics’ JAVA API for the Implementation of a Micromagnetic Modeling and Simulation Package with a Customized User Interface. In COMSOL Conference Europe, Mailand.
- Torrijos, M. C., Giaccio, G., & Zerbino, R. (2013). Mechanical and transport properties of 10years old concretes prepared with different coarse aggregates. Construction and Building Materials, 44, 706–715. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.03.065
- Wang, Q., Liu, Y., & Peng, G. (2016). Effect of water pressure on mechanical behavior of concrete under dynamic compression state. Construction and Building Materials, 125, 501–509. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.08.058
- Wu, J. (2012). Cement Concrete Pavement Dynamic Loads and Thermal Stress Analysis. Diss. Chang’an University.
- Wu, J., Xu, J., Diao, B., & Panesar, D. K. (2020). Chloride diffusivity, fatigue life, and service life analysis of RC beams under chloride exposure. Journal of Materials in Civil Engineering, 32(6), 04020107. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0003184
- Zeinizadeh, A., Mirzabozorg, H., Noorzad, A., & Amirpour, A. (2018). Hydrodynamic pressures in contraction joints including waterstops on seismic response of high arch dams. Structures, 14, 1–14. Elsevier. https://doi.org/https://doi.org/10.1016/j.istruc.2018.01.005
- Zhang, C., Xin-Xin, G., & Bu-Xin, C. (2014). Influence of uneven wet pavement surface condition on driving safety. Journal of Highway and Transportation Research and Development, 10(8), 104–111.
- Zhou, Y. (2015). Research on hydrodynamic pressure in asphalt pavement based on a five-dimensional optical fiber sensors. Diss. Wuhan Institute of Technology.