Effects of lead time and manufacturing methods applied for polymer-modified bitumen emulsion (PMBE) on microsurfacing performance

References

• Abdullin, A. I., & Emelyanycheva, E. A. (2020). Water-bitumen emulsions based on surfactants of various types. Journal of Chemical Technology and Metallurgy, 55(1), 73–80.
   Google Scholar
• Abedini, M., Hassani, A., Kaymanesh, M. R., Yousefi, A. A., & Abedini, H. (2018). Multiple stress creep and recovery behavior of SBR-modified bitumen emulsions. Journal of Testing and Evaluation, 48(4), 3116–3124. https://doi.org/10.1520/JTE20180031
   Web of Science ®Google Scholar
• Alan, J., & Sundaram, L. (2002). Emulsification of high softening point hydrocarbons. Akzo Nobel Surface Chemistry LLC, U.S.A.
   Google Scholar
• Anderson, D. A., Christensen, D. W., & Bahia, H. (1991). Physical properties of asphalt cement and the development of performance-related specifications. Journal of the Association of Asphalt Paving Technologists, 60, 437–475.
   Google Scholar
• Asphalt Institute. (2008). A basic asphalt emulsion manual, MS-19 (4th ed.). Asphalt Institute and Asphalt Emulsion Manufacturers Association. https://bookstore.asphaltinstitute.org/catalog/book/ms19asphaltemulsion
   Google Scholar
• ASTM D1076. (2018). Standard specification for rubber – concentrated, ammonia preserved, creamed, and centrifuged natural latex. American Society of Testing and Materials.
   Google Scholar
• ASTM D6372. (2015). Standard practice for design, testing, and construction of microsurfacing. ASTM International.
   Google Scholar
• ASTM D7175. (2015). Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. American Society of Testing and Materials.
   Google Scholar
• ASTM D7497. (2018). Standard practice for recovering residue from emulsified asphalt using low temperature evaporative technique. American Society of Testing and Materials.
   Google Scholar
• Banerjee, A., de Fortier Smit, A., & Prozzi, J. A. (2012). Modeling the effect of environmental factors on evaporative water loss in asphalt emulsions for chip seal applications. Construction and Building Materials, 27(1), 158–164. https://doi.org/10.1016/j.conbuildmat.2011.08.001
   Web of Science ®Google Scholar
• Baumgardner, G. (2006). Asphalt emulsion manufacturing today and tomorrow. In Asphalt emulsion technology (pp. 15–26). Transportation Research Circular E-C102.
   Google Scholar
• Bhargava, N., Siddagangaiah, A. K., & Ryntathiang, T. L. (2020). State of the art review on design and performance of microsurfacing. Road Materials and Pavement Design, 21(8), 2091–2125. https://doi.org/10.1080/14680629.2019.1607771
   Web of Science ®Google Scholar
• Booshehrian, A., Mogawer, W. S., & Bonaquist, R. (2013). How to construct an asphalt binder master curve and assess the degree of blending between RAP and virgin binders. Journal of Materials in Civil Engineering, 25(12), 1813–1821. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000726
   Web of Science ®Google Scholar
• Boucard, L., Schmitt, V., Farcas, F., & Gaudefroy, V. (2015). Bitumen emulsions formulation and destabilisation process relationship: Influence of salts addition. Road Materials and Pavement Design, 16(sup1), 330–348. https://doi.org/10.1080/14680629.2015.1030910
   Web of Science ®Google Scholar
• Brûlé, B., Brion, Y., & Tanguy, A. (1988). Paving asphalt polymer blends: Relationships between composition, structure and properties (with discussion). Association of Asphalt Paving Technologists Proc (Vol. 57).
   Google Scholar
• Chávez-Valencia, L. E., Alonso, E., Manzano, A., Pérez, J., Contreras, M. E., & Signoret, C. (2007). Improving the compressive strengths of cold-mix asphalt using asphalt emulsion modified by polyvinyl acetate. Construction and Building Materials, 21(3), 583–589. https://doi.org/10.1016/j.conbuildmat.2005.07.017
   Web of Science ®Google Scholar
• Chen, Z., & Li, Z. (2020). Preparation and stabilisation mechanism of asphalt-in-water pickering emulsion stabilised by SiO2 nanoparticles. Road Materials and Pavement Design, 1–40. https://doi.org/10.1080/14680629.2020.1826351
   Google Scholar
• Cheng, P., Yi, J., Chen, Z., Luan, H., & Feng, D. (2020). Influence factors of strength and performance of foamed asphalt cold recycled mixture. Road Materials and Pavement Design, 1–16. https://doi.org/10.1080/14680629.2020.1826343
   Google Scholar
• Daneshvar, D., Motamed, A., & Imaninasab, R. (2020). Improving fracture and moisture resistance of cold mix asphalt (CMA) using crumb rubber and cement. Road Materials and Pavement Design, 1–19. https://doi.org/10.1080/14680629.2020.1830152
   Google Scholar
• Fazaeli, H., Behbahani, H., Amini, A. A., Rahmani, J., & Yadollahi, G. (2012). High and low temperature properties of FT-paraffin-modified bitumen. Advances in Materials Science and Engineering, 2012, 1–7. https://doi.org/10.1155/2012/406791
   Web of Science ®Google Scholar
• Flores, G., Gallego, J., Miranda, L., & Marcobal, J. R. (2020). Cold asphalt mix with emulsion and 100% rap: Compaction energy and influence of emulsion and cement content. Construction and Building Materials, 250, 118804. https://doi.org/10.1016/j.conbuildmat.2020.118804
   Web of Science ®Google Scholar
• Forbes, A., Haverkamp, R. G., Robertson, T., Bryant, J., & Bearsley, S. (2001). Studies of the microstructure of polymer-modified bitumen emulsions using confocal laser scanning microscopy. Journal of Microscopy, 204(3), 252–257. https://doi.org/10.1046/j.1365-2818.2001.00955.x
   PubMed Web of Science ®Google Scholar
• Gingras, J.-P., Tanguy, P. A., Mariotti, S., & Chaverot, P. (2005). Effect of process parameters on bitumen emulsions. Chemical Engineering and Processing: Process Intensification, 44(9), 979–986. https://doi.org/10.1016/j.cep.2005.01.003
   Web of Science ®Google Scholar
• Godenzoni, C., Graziani, A., & Perraton, D. (2017). Complex modulus characterisation of cold-recycled mixtures with foamed bitumen and different contents of reclaimed asphalt. Road Materials and Pavement Design, 18(1), 130–150. https://doi.org/10.1080/14680629.2016.1142467
   Web of Science ®Google Scholar
• Gransberg, D. D. (2010). Microsurfacing: A synthesis of highway practices (NCHRP Synthesis 411). Transportation Research Board.
   Google Scholar
• Gutierrez, X., Silva, F., Chirinos, M., Leiva, J., & Rivas, H. (2002). Bitumen-in-water emulsions: An overview on formation, stability, and rheological properties. Journal of Dispersion Science and Technology, 23(1–3), 405–418. https://doi.org/10.1080/01932690208984213
   Web of Science ®Google Scholar
• Hafezzadeh, R., & Kavussi, A. (2019). Application of microsurfacing in repairing pavement surface rutting. Road Materials and Pavement Design, 1–12. https://doi.org/10.1080/14680629.2019.1663243
   Google Scholar
• Hou, S., Chen, C., Zhang, J., Shen, H., & Gu, F. (2018). Thermal and mechanical evaluations of asphalt emulsions and mixtures for microsurfacing. Construction and Building Materials, 191, 1221–1229. https://doi.org/10.1016/j.conbuildmat.2018.10.091
   Web of Science ®Google Scholar
• Hu, C., Zhao, J., Leng, Z., Partl, M. N., & Li, R. (2019). Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application. Construction and Building Materials, 197, 220–227. https://doi.org/10.1016/j.conbuildmat.2018.11.223
   Web of Science ®Google Scholar
• Islam, R. M., Abadie, C., & Wasiuddin, N. M. (2017). Multiple shear step approach to determine the rotational viscosity of asphalt emulsions and its correlation with water content of original and diluted emulsions. International Journal of Pavement Engineering, 18(12), 1122–1129. https://doi.org/10.1080/10298436.2016.1162305
   Web of Science ®Google Scholar
• ISSA. (2017a). Outline guide design procedure for slurry seal. Technical Bulletin 111. International slurry surfacing association.
   Google Scholar
• ISSA. (2017b). Test method formeasurement of excess asphalt in bituminous mixtures by use of a loaded wheel tester and sand adhesion. Technical Bulletin 109. International slurry surfacing association.
   Google Scholar
• ISSA. (2017c). Test method for measurement of stability and resistance to compaction, vertical and lateral displacement of multilayered fine aggregate coldmixes. Technical Bulletin 147. International slurry surfacing association.
   Google Scholar
• ISSA. (2017d). Laboratory test method for wet track abrasion of slurry surfacing systems. Technical Bulletin 100. International slurry surfacing association.
   Google Scholar
• ISSA. (2017e). Test method to classify emulsified asphalt/aggregatemixture systems bymodified cohesion testermeasurement of set and cure characteristics. Technical Bulletin 139. International slurry surfacing association.
   Google Scholar
• ISSA A143. (2010). Recommended performance guideline for micro surfacing. International Slurry Surfacing Association.
   Google Scholar
• Izadi, A., Zalnezhad, M., Bozorgi Makerani, P., & Zalnezhad, H. (2020). Mix design and performance evaluation of coloured slurry seal mixture containing natural iron oxide red pigments. Road Materials and Pavement Design, 1–18. https://doi.org/10.1080/14680629.2020.1860803
   Web of Science ®Google Scholar
• Jin, T. H., Warid, M. N. M., Idham, M. K., Hainin, M. R., Yaacob, H., Hassan, N. A., Ismail, C. R., & Afiqah, R. N. (2019). Modification of emulsified bitumen using styrene-butadiene rubber (SBR). IOP Conference Series: Materials Science and Engineering, 527, 012050. https://doi.org/10.1088/1757-899X/527/1/012050
   Google Scholar
• Johannes, P. T. (2014). Development of an improved mixture design framework for slurry seals and micro-surfacing treatments. The University of Wisconsin-Madison.
   Google Scholar
• Keymanesh, M. R., Ziari, H., Zalnezhad, H., & Zalnezhad, M. (2021). Mix design and performance evaluation of microsurfacing containing electric arc furnace (EAF) steel slag filler. Construction and Building Materials, 269, 121336. https://doi.org/10.1016/j.conbuildmat.2020.121336
   Web of Science ®Google Scholar
• Kiihnl, L. P. (2020). Best practices for asphalt emulsion particle size analyses using a coulter counter. University of Arkansas.
   Google Scholar
• Kim, Y. R., Underwood, B., Far, M. S., Jackson, N., Puccinelli, J., & Engineers, N. C. (2011). LTPP computed parameter: Dynamic modulus. FHWA-HRT-10-035 Final Report, FHWA, McLean, VA.
   Google Scholar
• King, G., & Johnston, J. (2012). Polymer modified asphalt emulsions composition, uses, and specifications for surface treatments. Federal Highway Administration.
   Google Scholar
• Lesueur, D. (2011). Polymer modified bitumen emulsions (PMBEs). In T. McNally (Ed.), Polymer modified bitumen (pp. 25–42). Woodhead. https://doi.org/10.1533/9780857093721.1.25
   Google Scholar
• Lesueur, D., & Potti, J. J. (2004). Cold mix design: A rational approach based on the current understanding of the breaking of bituminous emulsions. Road Materials and Pavement Design, 5(sup1), 65–87. https://doi.org/10.1080/14680629.2004.9689988
   Google Scholar
• Li, J., Zhu, Z., Ke, L., & Wang, Z. (2020). Rheological performance investigation of high viscosity liquid asphalt. Road Materials and Pavement Design, 1–15. https://doi.org/10.1080/14680629.2020.1792965
   Google Scholar
• Liu, Z. G., Zong, L., Zhao, L. L., & Xie, X. M. (2013). Preparation and storage stability of asphalt emulsions made from modified lignin cationic asphalt emulsifiers. Applied Mechanics and Materials, 357–360, 781–785. https://doi.org/10.4028/www.scientific.net/AMM.357-360.781
   Google Scholar
• Luo, X., Gu, F., Ling, M., & Lytton, R. L. (2018). Review of mechanistic-empirical modeling of top-down cracking in asphalt pavements. Construction and Building Materials, 191, 1053–1070. https://doi.org/10.1016/j.conbuildmat.2018.10.005
   Web of Science ®Google Scholar
• Mallick, R. B., & El-Korchi, T. (2013). Pavement engineering: Principles and practice (2nd ed.). CRC Press.
   Google Scholar
• Mezger, T. (2020). The rheology handbook: For users of rotational and oscillatory rheometers (5th ed.). Vincentz Network. https://doi.org/10.1515/9783748603702
   Google Scholar
• Monney, O. K., Khalid, H. A., & Artamendi, I. (2007). Assessment of fracture properties of emulsified asphalt mixtures. Road Materials and Pavement Design, 8(1), 87–102. https://doi.org/10.1080/14680629.2007.9690068
   Web of Science ®Google Scholar
• Morrison, I. (2003). Dispersions (Kirk-Othmer encyclopedia of chemical technology. John Wiley. https://doi.org/10.1002/0471238961.0409191613151818.a01
   Google Scholar
• Pang, J., Du, S., Chang, R., Pei, Q., & Cui, D. (2015). Effect of emulsifier content on the rheological properties of asphalt emulsion residues. Journal of Applied Polymer Science, 132(15), n/a–n/a. https://doi.org/10.1002/app.41806
   Web of Science ®Google Scholar
• Read, J., & Whiteoak, D. (2003). The shell bitumen handbook (5th ed). Thomas Telford.
   Google Scholar
• Redelius, P., Östlund, J.-A., & Soenen, H. (2016). Field experience of cold mix asphalt during 15 years. Road Materials and Pavement Design, 17(1), 223–242. https://doi.org/10.1080/14680629.2015.1068702
   Web of Science ®Google Scholar
• Ruggles, C. S. (2004). The efficient use of environmentally-friendly natural rubber latex in road construction-past, present and the future. Rubber in Transport.
   Google Scholar
• Ryms, M., Denda, H., & Jaskuła, P. (2017). Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces. Construction and Building Materials, 142, 328–341. https://doi.org/10.1016/j.conbuildmat.2017.03.050
   Web of Science ®Google Scholar
• Salomon, D. (2006). Asphalt emulsion technology, TRC E-102. Transportation Research Board. http://onlinepubs.trb.org/onlinepubs/circulars/ec102.pdf
   Google Scholar
• Shafii, M., Rahman, M. A., & Ahmad, J. (2011). Polymer modified asphalt emulsion. International Journal of Civil and Environmental Engineering, 11(6), 43–49. https://doi.org/10.1533/9780857093721.1.25
   Google Scholar
• Shirkavand Hadavand, B., Ghobadi Jola, B., Didehban, K., & Mirshokraie, A. (2020). Modified bitumen emulsion by anionic polyurethane dispersion nanocomposites. Road Materials and Pavement Design, 21(6), 1763–1774. https://doi.org/10.1080/14680629.2019.1567373
   Web of Science ®Google Scholar
• Stimilli, A., Ferrotti, G., Graziani, A., & Canestrari, F. (2013). Performance evaluation of a cold-recycled mixture containing high percentage of reclaimed asphalt. Road Materials and Pavement Design, 14(sup1), 149–161. https://doi.org/10.1080/14680629.2013.774752
   Web of Science ®Google Scholar
• Takamura, K., & Heckmann, W. (2001). Polymer network formation in the pavement using SBR latex modified asphalt emulsions. Studies in Surface Science and Catalysis, 132, 271–274. https://doi.org/10.1016/S0167-2991(01)82085-1
   Google Scholar
• Tebaldi, G., Dave, E. V., Marsac, P., Muraya, P., Hugener, M., Pasetto, M., Graziani, A., Grilli, A., Bocci, M., Marradi, A., Wendling, L., Gaudefroy, V., Jenkins, K., Loizos, A., & Canestrari, F. (2014). Synthesis of standards and procedures for specimen preparation and in-field evaluation of cold-recycled asphalt mixtures. Road Materials and Pavement Design, 15(2), 272–299. https://doi.org/10.1080/14680629.2013.866707
   Web of Science ®Google Scholar
• Xu, L., Li, X., Zong, Q., & Xiao, F. (2021). Chemical, morphological and rheological investigations of SBR/SBS modified asphalt emulsions with waterborne acrylate and polyurethane. Construction and Building Materials, 272, 121972. https://doi.org/10.1016/j.conbuildmat.2020.121972
   Web of Science ®Google Scholar
• Zalnezhad, M., & Hesami, E. (2020). Effect of steel slag aggregate and bitumen emulsion types on the performance of microsurfacing mixture. Journal of Traffic and Transportation Engineering (English Edition), 7(2), 215–226. https://doi.org/10.1016/j.jtte.2018.12.005
   Google Scholar
• Zhang, Q., Fan, W., Wang, T., Sunarso, J., & Nan, G. (2014). The influence of emulsifier type on conventional properties, thermal behavior, and microstructure of styrene-butadiene-styrene polymer modified bitumen. Petroleum Science and Technology, 32(10), 1184–1190. https://doi.org/10.1080/10916466.2011.645102
   Web of Science ®Google Scholar
• Zhang, R., He, Y., & Ao, Z. (2007). An asphalt emulsion modified by compound of epoxy resin and styrene-butadiene rubber emulsion. International Journal of Mathematical Models And Methods In Applied Sciences, 1(4), http://www.wseas.us/e-library/conferences/2007trinidad/papers/556-093.pdf
   Google Scholar
• Ziari, H., Keymanesh, M. R., & Zalnezhad, H. (2020). Effect of emulsifying agent on rheological properties of bitumen emulsion modified with different techniques of adding SBR latex polymer. Road Materials and Pavement Design, 1–17. https://doi.org/10.1080/14680629.2020.1835695
   Google Scholar