Application of textile fibres from tire recycling in asphalt mixtures

References

• Abtahi, S. M., Sheikhzadeh, M., & Hejazi, S. M. (2010). Fiber-reinforced asphalt-concrete – A review. Construction and Building Materials, 24(6), 871–877. https://doi.org/10.1016/j.conbuildmat.2009.11.009
   Web of Science ®Google Scholar
• Amorim, S. I. R., Pais, J. C., Vale, A. C., & Minhoto, M. J. C. (2015). A model for equivalent axle load factors. International Journal of Pavement Engineering, 16(10), 881–893. https://doi.org/10.1080/10298436.2014.968570
   Web of Science ®Google Scholar
• Apostolidis, P., Liu, X., Daniel, G. C., Erkens, S., & Scarpas, T. (2020). Effect of synthetic fibres on fracture performance of asphalt mortar. Road Materials and Pavement Design, 21(7), 1918–1931. https://doi.org/10.1080/14680629.2019.1574235
   Web of Science ®Google Scholar
• Bazant, Z. P., & Prat, P. C. (1988). Effect of temperature and humidity on fracture energy of concrete. ACI Materials Journal, 85(4), 262–271. https://doi.org/10.14359/2127.
   Web of Science ®Google Scholar
• Bright Singh, S., & Madasamy, M. (2021). Investigation of aggregate size effects on properties of basalt and carbon fibre-reinforced pervious concrete. Road Materials and Pavement Design, 1–24. https://doi.org/10.1080/14680629.2021.1886158
   Google Scholar
• Brovelli, C., Crispino, M., Pais, J. C., & Pereira, P. A. A. (2014). Assessment of fatigue resistance of additivated asphalt concrete incorporating fibers and polymers. Journal of Materials in Civil Engineering, 26(3), 554–558. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000837
   Web of Science ®Google Scholar
• Brovelli, C., Crispino, M., Pais, J., & Pereira, P. (2015). Using polymers to improve the rutting resistance of asphalt concrete. Construction and Building Materials, 77, 117–123. https://doi.org/10.1016/j.conbuildmat.2014.12.060
   Web of Science ®Google Scholar
• Brovelli, C., Hilliou, L., Hemar, Y., Pais, J., Pereira, P., & Crispino, M. (2013). Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties. Construction and Building Materials, 48, 1202–1208. https://doi.org/10.1016/j.conbuildmat.2013.07.032
   Web of Science ®Google Scholar
• Chen, H., & Xu, Q. (2010). Experimental study of fibers in stabilizing and reinforcing asphalt binder. Fuel, 89(7), 1616–1622. https://doi.org/10.1016/j.fuel.2009.08.020
   Web of Science ®Google Scholar
• Chowdhury, A., Bhasin, A., & Button, J. W. (2006). Fibers from recycled tire as reinforcement in Hot Mix Asphalt. College Station, TX: Texas Transportation Institute. Texas A&M University System.
   Google Scholar
• Claessen, A., Edwards, J. M., Sommer, P., & Uge, P. (1977, August 22–26). Asphalt pavement design - The Shell method. 4th International Conference on Structural Design of Asphalt Pavements, The University of Michigan, Ann Arbor, MI, USA.
   Google Scholar
• Dantas-Neto, S. A., Farias, M. M., Pais, J. C., & Pereira, P. A. A. (2006). Dense graded hot mixes using asphalt-rubber binders with high rubber contents. Road Materials and Pavement Design, 7(1), 29–46. https://doi.org/10.3166/rmpd.7.29-46.
   Web of Science ®Google Scholar
• Fitzgerald, R. L. (2000). Novel applications of carbon fiber for hot mix asphalt reinforcement and carbon-carbon pre-forms by. Michigan Technological University.
   Google Scholar
• Haghnejad, M., & Modarres, A. (2020). Effect of freeze-thaw cycles on the response of roller compacted concrete pavement reinforced by recycled polypropylene fibre under monotonic and cyclic loadings. Road Materials and Pavement Design, 1–17. https://doi.org/10.1080/14680629.2020.1794942
   Web of Science ®Google Scholar
• Han, C., He, Y., Tian, J., Zhang, J., Li, J., & Wang, S. (2020). Shear strength of polypropylene fibre reinforced clay. Road Materials and Pavement Design, 1–18. https://doi.org/10.1080/14680629.2020.1798807
   Google Scholar
• Kasu, S. R., Mitra, N., & Muppireddy, A. R. (2020). Influence of polyester microfiber reinforcement on flexural fatigue characteristics of concrete. Road Materials and Pavement Design, 1–17. https://doi.org/10.1080/14680629.2020.1808521
   Google Scholar
• Kolase, P. K., & Desai, A. K. (2019). Experimental study on monotonic and fatigue behaviour of polypropylene fibre-reinforced roller-compacted concrete with fly ash. Road Materials and Pavement Design, 20(5), 1096–1113. https://doi.org/10.1080/14680629.2018.1436466
   Web of Science ®Google Scholar
• Lo Presti, D. (2013). Recycled tyre rubber modified Bitumens for road asphalt mixtures: A literature review. Construction and Building Materials, 49, 863–881. https://doi.org/10.1016/j.conbuildmat.2013.09.007
   Web of Science ®Google Scholar
• Lo Presti, D., Fecarotti, C., Clare, A. T., & & Airey, G. (2014). Toward more realistic viscosity measurements of tyre rubber-bitumen blends. Construction and Building Materials, 67(PART B), 270–278. https://doi.org/10.1016/j.conbuildmat.2014.03.038
   Google Scholar
• Noorvand, H., Salim, R., Medina, J., Stempihar, J., & Underwood, B. S. (2018). Effect of synthetic fiber state on mechanical performance of fiber reinforced asphalt concrete. Transportation Research Record, 2672(28), 42–51. https://doi.org/10.1177/0361198118787975.
   Web of Science ®Google Scholar
• Paris, P., & Erdogan, F. (1963). A critical analysis of crack propagation laws. Journal of Basic Engineering, 85(4), 528–533. https://doi.org/10.1115/1.3656900
   Google Scholar
• Peralta, J., Silva, H. M. R. D., Machado, A. V., Pais, J., Pereira, P. A. A., & Sousa, J. B. (2010). Changes in rubber due to its interaction with bitumen when producing asphalt rubber. Road Materials and Pavement Design, 11(4), 1009–1031. https://doi.org/10.1080/14680629.2010.9690317
   Web of Science ®Google Scholar
• Pereira, P., & Pais, J. (2017). Main flexible pavement and mix design methods in Europe and challenges for the development of an European method. Journal of Traffic and Transportation Engineering (English Edition), 4(4), 316–346. https://doi.org/10.1016/j.jtte.2017.06.001
   Google Scholar
• Piuzzi, G. P., Scheuermann Filho, H. C., Villena Del Carpio, J. A., & Consoli, N. C. (2021). The effects of porosity, asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends. Geotextiles and Geomembranes, 49(3), 864–870. https://doi.org/10.1016/j.geotexmem.2021.01.002
   Web of Science ®Google Scholar
• Polacco, G., Berlincioni, S., Biondi, D., Stastna, J., & Zanzotto, L. (2005). Asphalt modification with different polyethylene-based polymers. European Polymer Journal, 41(12), 2831–2844. https://doi.org/10.1016/j.eurpolymj.2005.05.034
   Web of Science ®Google Scholar
• Sagnol, L., Quezada, J. C., Chazallon, C., & Stöckner, M. (2019). Effect of glass fibre grids on the bonding strength between two asphalt layers and its contact dynamics method modelling. Road Materials and Pavement Design, 20(5), 1164–1181. https://doi.org/10.1080/14680629.2018.1439764
   Web of Science ®Google Scholar
• Skok, E., Johnson, E., & Turk, A. (2002). Asphalt pavement analyzer (APA) evaluation. St. Paul, MN: Minnesota Department of Transportation. Office of Research Services.
   Google Scholar
• Subhy, A., Lo Presti, D., Airey, G., & Widyatmoko, I. (2021). Rutting analysis of different rubberised stone mastic asphalt mixtures: From binders to mixtures. Road Materials and Pavement Design, 1–17. https://doi.org/10.1080/14680629.2021.1950818
   Google Scholar
• Thives, L. P., Pais, J. C., Pereira, P. A. A., Trichês, G., & Amorim, S. R. (2013). Assessment of the digestion time of asphalt rubber binder based on microscopy analysis. Construction and Building Materials, 47, 431–440. https://doi.org/10.1016/j.conbuildmat.2013.05.087
   Web of Science ®Google Scholar
• Wang, X., Wu, R., & Zhang, L. (2019). Development and performance evaluation of epoxy asphalt concrete modified with glass fibre. Road Materials and Pavement Design, 20(3), 715–726. https://doi.org/10.1080/14680629.2017.1413006
   Web of Science ®Google Scholar
• Weise, C., & Sommer, V. (2020). Glass fibre modified asphalts and the use as a tension belt – pavement service lifetime calculations and economic efficiency. Road Materials and Pavement Design, 1–10. https://doi.org/10.1080/14680629.2020.1798274
   Google Scholar
• Zhou, F., Im, S., Sun, L., & Scullion, T. (2017). Development of an IDEAL cracking test for asphalt mix design and QC/QA. Road Materials and Pavement Design, 18(sup4), 405–427. https://doi.org/10.1080/14680629.2017.1389082
   Web of Science ®Google Scholar