Impact of lateral load transfer in heavy road vehicles at horizontal curves on the distress of asphalt pavements

References

• AASHTO. (2011). A policy on geometric design of highways and streets (6th ed.). American Association of State Highway and Transportation Officials.
   Google Scholar
• Al-Qadi, I. L., & Yoo, P. J. (2007). Effect of surface tangential contact stresses on flexible pavement response. Journal of Association of Asphalt Paving Technologists, 76, 663–692.
   Google Scholar
• Arcidiacono, A. (2018). DAS virtual validation: ACC and AEB case study with IPG CarMaker (Doctoral dissertation). Politecnico di Torino.
   Google Scholar
• Asphalt Institute. (1982). Research and Development of the Asphalt Institute's Thickness Design Manual (MS-1). Asphalt Institute.
   Google Scholar
• Brown, A., & Brennan, S. (2014). On the required complexity of vehicle dynamic models for use in simulation-based highway design. Journal of Safety Research, 49(4), 105–112. https://doi.org/10.1016/j.jsr.2014.03.005
   PubMedGoogle Scholar
• Cebon, D. (1999). Handbook of vehicle-road interactions. Swets & Zeitlinger.
   Google Scholar
• Cole, D. J., & Cebon, D. (1989). Simulation and measurement of dynamic tyre forces. Cambridge University Press.
   Google Scholar
• COMSOL. (2017). COMSOL Multiphysics Reference Manual (version 5.3).
   Google Scholar
• Doumiati, M., Victorino, A., Charara, A., & Lechner, D. (2009). Lateral load transfer and normal forces estimation for vehicle safety: Experimental test. Vehicle System Dynamics, 47(12), 1511–1533. https://doi.org/10.1080/00423110802673091
   Web of Science ®Google Scholar
• Easa, S. M. (1999). Superelevation, side friction, and roadway consistency. Journal of Transportation Engineering, 125(6), 569–570. https://doi.org/10.1061/(ASCE)0733-947X(1999)125:6(569)
   Google Scholar
• Haider, S. W., & Chatti, K. (2009). Effects of design and site factors on roughness development in flexible pavements. Journal of Transportation Engineering, 135(3), 112–120. https://doi.org/10.1061/(ASCE)0733-947X(2009)135:3(112)
   Google Scholar
• IPG TruckMaker. (2014). Reference Manual (version 4.5). IPG Automotive, Karlsruhe, Germany.
   Google Scholar
• IRC:3. (1983). Dimensions and weights of road design vehicles. Indian Road Congress, New Delhi, India.
   Google Scholar
• IRC:37. (2018). Guidelines for the design of flexible pavements (Fourth Revision). Indian Roads Congress, New Delhi, India.
   Google Scholar
• IRC:73. (1980). Geometric design standards for rural (non-urban) highways. Indian Roads Congress, New Delhi, India.
   Google Scholar
• ISO:8608. (2016). Mechanical vibration – Road surface profiles – Reporting of measured data. International Organization for Standardization, Geneva.
   Google Scholar
• Jan, F., Philipp, W., Edin, T., & Patrick, R. (2012). Real time driving dynamics simulation in heavy commercial vehicles. Presented at IPG Technology Conference on Apply and Innovate, Karlsruhe.
   Google Scholar
• Kamnik, R., Boettiger, F., & Hunt, K. (2003). Roll dynamics and lateral load transfer estimation in articulated heavy freight vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 217(11), 985–997. https://doi.org/10.1243/095440703770383884
   Google Scholar
• Khavassefat, P., Jelagin, D., & Birgisson, B. (2015). Dynamic response of flexible pavements at vehicle–road interaction. Road Materials and Pavement Design, 16(2), 256–276. https://doi.org/10.1080/14680629.2014.990402
   Web of Science ®Google Scholar
• Kordani, A. A., Sabbaghian, M. H., & Kallebasti, B. T. (2015). Analyzing the influence of coinciding horizontal curves and vertical sag curves on side friction factor and lateral acceleration using simulation modeling. Proceedings of the International Symposium on Highway Geometric Design, Vancouver, BC.
   Google Scholar
• Matthias, P., Peter, R., & Michael, F. (2012). Maneuver based validation of BMW xDRIVE variants by using virtual vehicle integration and HiL test methods. Presented at IPG Technology Conference, Karlsruhe.
   Google Scholar
• Mavromatis, S., Psarianos, B., Tsekos, P., Kleioutis, G., & Katsanos, E. (2016). Investigation of vehicle motion on sharp horizontal curves combined with steep longitudinal grades. Transportation Letters, 8(4), 220–228. https://doi.org/10.1080/19427867.2015.1114748
   Web of Science ®Google Scholar
• Miner, M. A. (1945). Cumulative damage in fatigue. Journal of Applied Mechanics, 12(3), A159–A164. https://doi.org/10.1115/1.4009458
   Web of Science ®Google Scholar
• Molan, A. M., & Kordani, A. A. (2014). Multi-Body simulation modeling of vehicle skidding and roll over for horizontal curves on longitudinal grades. Presented at the 93rd Annual Meeting of Transportation Research Board, Washington, DC.
   Google Scholar
• Múčka, P. (2017). Simulated road profiles according to ISO 8608 in vibration analysis. Journal of Testing and Evaluation, 46(1), 405–418. https://doi.org/10.1520/JTE20160265
   Web of Science ®Google Scholar
• Nurzaki, I., Abdullah, A. S., & Ramli, R. (2017). Experimental validation of vehicle dynamic characteristics of a virtual heavy vehicle model. Journal of Mechanical Engineering, 4(5), 131–143.
   Google Scholar
• Olofsson, M., & Pettersson, J. (2015). Parameterization and validation of road and driver behavior models for CarMaker simulations and transmission HIL-rig (Master's thesis). Department of Applied Mechanics, Chalmers University of Technology, Sweden.
   Google Scholar
• Ozener, O., & Allouchery, L. (2017). Istanbul metrobus line fuel consumption optimization via 3D road model by using AVL cruise and IPG truck maker co-simulation. International Journal of Advanced Automotive Technologies, 1(2), 100–104. https://doi.org/10.15659/ijaat.17.04.508
   Google Scholar
• Pacejka, H. B. (2002). Tyre and vehicle dynamics. Butterworth-Heinemann.
   Google Scholar
• Petit, C., Diakhate, M., & Millien, A. (2009). Pavement design for curved road sections fatigue performance of interfaces and longitudinal top-down cracking in multilayered pavements. Road Materials and Pavement Design, 10(3), 609–624. https://doi.org/10.3166/rmpd.10.609-624
   Web of Science ®Google Scholar
• Qu, G., He, Y., Sun, X., & Tian, J. (2018). Modeling of lateral stability of tractor-semitrailer on combined alignments of freeway. Discrete Dynamics in Nature and Society, 2018(1445), 1–17. https://doi.org/10.1155/2018/8438921
   Google Scholar
• Quinn, B. E., & Hildebrand, S. E. (1973). Effect of road roughness on vehicle steering. Prepared for the 52nd Annual Meeting on Evaluation of pavement surface properties and vehicle interaction: 12 reports (471, pp. 62–75). Highway Research Board, Division of Engineering, National Research Council.
   Google Scholar
• TASS International. (2018). Tass delft-tyre toolchain. Siemens Business.
   Google Scholar
• Tavassoli Kallebasti, B., Abdi Kordani, A., Mavromatis, S., & Boroomandrad, S. M. (2021). Lateral friction demand on roads with coincident horizontal and vertical sag curves. Proceedings of the Institution of Civil Engineers - Transport, 174(3), 159–169. https://doi.org/10.1680/jtran.17.00164
   Web of Science ®Google Scholar
• Torbic, D. J., Donnell, E. T., Brennan, S. N., Brown, A., O'Laughlin, M. K., & Bauer, K. M. (2015). Superelevation design for sharp horizontal curves on steep grades. Transportation Research Record: Journal of the Transportation Research Board, 2436(1), 81–91. https://doi.org/10.3141/2436-09
   Google Scholar
• Tyan, F., Hong, Y., Tu, S., & Jeng, W. S. (2009). Generation of random road profiles. Journal of Advanced Engineering, 4(2), 1373–1378.
   Google Scholar
• Wang, H., Al-Qadi, I. L., & Stanciulescu, I. (2013). Effect of surface friction on tire–pavement contact stresses during vehicle maneuvering. Journal of Engineering Mechanics, 140(4), 04014001. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000691
   Google Scholar
• Zheng, M., Han, L., Wang, C., Xu, Z., Li, H., & Ma, Q. (2017). Simulation of permanent deformation in high-modulus asphalt pavement with sloped and horizontally curved alignment. Applied Sciences, 7(4), 331. https://doi.org/10.3390/app7040331
   Google Scholar