References
- Al-Khoury, R., Scarpas, A., Kasbergen, C., & Blaauwendraad, J. (2001). Spectral element technique for efficient parameter identification of layered media Part I: Forward calculation. International Journal of Solids and Structures, 38(48–49), 8753–8772. https://doi.org/https://doi.org/10.1016/S0020-7683(01)00109-3
- Al-Khoury, R., Scarpas, A., Kasbergen, C., & Blaauwendraad, J. (2002). Spectral element technique for efficient parameter identification of layered media. Part III: Viscoelastic aspects. International Journal of Solids and Structures, 39(8), 2189–2201. https://doi.org/https://doi.org/10.1016/S0020-7683(02)00079-3
- Attia, T. (2020). Interfaces between pavement layers in bituminous mixtures. (Thèse de Doctorat). ENTPE.
- Attia, T., Di Benedetto, H., Sauzéat, C., & Pouget, S. (2020). 2T3C hca, a new hollow cylinder device using digital image correlation to measure properties of interfaces between asphalt layers. Construction and Building Materials, 247, 118499. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2020.118499
- Attia, T., Di Benedetto, H., Sauzéat, C., & Pouget, S. (2021). Behaviour of an interface between pavement layers obtained using digital image correlation. Materials and Structures, 54(1), 1–11. https://doi.org/https://doi.org/10.1617/s11527-021-01625-w
- Barriera, M., Lebental, B., & Pouget, S. (2019). Towards road pavement response under moving loads. Road Materials and Pavement Design, 20(sup1), S480–S499. https://doi.org/https://doi.org/10.1080/14680629.2019.1588780
- Broutin, M. (2010). Assessment of flexible airfield pavements using Heavy Weight Deflectometers. (Thèse de Doctorat). Ecole Nationale des Ponts et Chaussées.
- Cao, D., Zhao, Y., Liu, W., Li, Y., & Ouyang, J. (2018). Comparisons of asphalt pavement responses computed using layer properties backcalculated from dynamic and static approaches. Road Materials and Pavement Design, 20(5), 1114–1130. https://doi.org/https://doi.org/10.1080/14680629.2018.1436467
- Chabot, A., Chupin, O., Deloffre, L., & Duhamel, D. (2010). ViscoRoute 2.0 A: Tool for the Simulation of Moving Load Effects on Asphalt Pavement. Road Materials and Pavement Design, 11(2), 227–250. https://doi.org/https://doi.org/10.1080/14680629.2010.9690274
- Doyle, J. F. (1989). Wave Propagation in structures. In Wave Propagation in structures (pp. 126–156). New York, NY: Springer. https://doi.org/https://doi.org/10.1007/978-1-4684-0344-2_6.
- El Ayadi, A., Picoux, B., Lefeuve-Mesgouez, G., Mesgouez, A., & Petit, C. (2012). An improved dynamic model for the study of a flexible pavement. Advances in Engineering Software, 44(1), 44–53. https://doi.org/https://doi.org/10.1016/j.advengsoft.2011.05.038
- Garg, N., & Flynn, M. (2016). Debonding in airfield pavement hot mix asphalt layers. 8th RILEM International Conference on Mechanisms of Cracking and Debonding in pavements, RILEM Bookseries, 13, 557–562. https://doi.org/https://doi.org/10.1007/978-94-024-0867-6_78.
- Grellet, D., Doré, G., Chupin, O., & Piau, J.-M. (2018). Highlighting of the viscoelastic behaviour of interfaces in asphalt pavements – a possible origin to top-down cracking. Road Materials and Pavement Design, 19(3), 581–590. https://doi.org/https://doi.org/10.1080/14680629.2018.1418721
- Grenier, S., Konrad, J.-M., & LeBœuf, D. (2009). Dynamic simulation of falling weight deflectometer tests on flexible pavements using the spectral element method: Forward calculations. Canadian Journal of Civil Engineering, 36(6), 944–956. https://doi.org/https://doi.org/10.1139/L08-118
- Huet, C. (1963). Étude par une méthode d’impédance du comportement viscoélastique des matériaux hydrocarbonés.
- Ktari, R., Fouchal, F., Millien, A., & Petit, C. (2017). Surface roughness: A Key parameter in pavement interface design. European Journal of Environmental and Civil Engineering, 21(sup1), 27–42. https://doi.org/https://doi.org/10.1080/19648189.2017.1304284
- Miró, R., Ortiz-Ripoll, J., Martínez, A., Botella, R., Pérez-Jiménez, F., & López-Montero, T. (2021). A new proposal to assess shear fatigue resistance of asphalt pavement interfaces. Road Materials and Pavement Design, 22(S1), S462–S481. https://doi.org/https://doi.org/10.1080/14680629.2021.1899966
- Mousa, M., Elseifi, M. A., Elbagalati, O., & Mohammad, L. N. (2019). Evaluation of interface bonding conditions based on non-destructing testing deflection measurements. Road Materials and Pavement Design, 20(3), 554–571. https://doi.org/https://doi.org/10.1080/14680629.2017.1400995
- NF EN 12697-33 + A1. (2007). Mélanges bitumineux - Méthodes d’essai pour mélange hydrocarboné à chaud - Partie 33: Confection d’éprouvettess au compacteur de plaque. [in French].
- Olard, F., & Di Benedetto, H. (2003). General “2S2P1D” model and relation between the linear viscoelastic behaviours of bituminous binders and mixes. Road Materials and Pavement Design, 4(2), 185–224. https://doi.org/https://doi.org/10.1080/14680629.2003.9689946
- Petit, C., Chabot, A., Destrée, A., & Raab, C. (2018). Interface Debonding behavior. In W. Buttlar, A. Chabot, E. Dave, C. Petit, & G. Tebaldi (Eds.), Mechanisms of Cracking and Debonding in asphalt and composite pavements (pp. 103–153). Cham: Springer.
- Roussel, J.-M., Di Benedetto, H., Sauzéat, C., & Broutin, M. (2020a). Simulation of Heavy Weight Deflectometer test: Spectral Element Method vs Finite Element Method. Lecture Notes in Civil Engineering, proceedings of the 9th International Conference on maintenance and rehabilitation of pavement - Mairepav9, 76, 699–708. https://doi.org/https://doi.org/10.1007/978-3-030-48679-2_65.
- Roussel, J.-M., Di Benedetto, H., Sauzéat, C., & Broutin, M. (2020b). Spectral element simulation of heavy weight deflectometer test including layer interface conditions and linear viscoelastic behaviour of bituminous materials. Lecture Notes in Civil Engineering, Accelerated Pavement Testing to Transport Infrastructure Innovation, 96, 658–665. https://doi.org/https://doi.org/10.1007/978-3-030-55236-7_68
- Roussel, J.-M., Sauzéat, C., Di Benedetto, H., & Broutin, M. (2019). Numerical simulation of falling/heavy weight deflectometer test considering linear viscoelastic behaviour in bituminous layers and inertia effects. Road Materials and Pavement Design, 20(sup1), S64–S78. https://doi.org/https://doi.org/10.1080/14680629.2019.1587491
- Sadoun, A., Broutin, M., & Simonin, J.-M. (2016). Assessment of HWD ability to detect debonding of pavement layer interfaces. 8th RILEM International Conference on Mechanisms of Cracking and Debonding in pavements, RILEM Bookseries, 13, 763–769. https://doi.org/https://doi.org/10.1007/978-94-024-0867-6_106.
- Sayegh, G. (1965). Variation des modules de quelques bitumes purs et enrobés bitumineux. (Thèse de Doctorat). Faculté des Sciences de l’Université de Paris.
- Uzan, J., Livneh, M., & Eshed, Y. (1978). Investigation of adhesion properties between asphaltic-concrete layers. Association of Asphalt Paving Technologists Proc, 47(78–11), 48.