Appraising bitumen coverage, workability, and production temperatures of warm asphalt-aggregate blends

References

• Airey, G. D., Hunter, A. E., & Collop, A. C. (2008). The effect of asphalt mixture gradation and compaction energy on aggregate degradation. Construction and Building Materials, 22(5), 972–980. https://doi.org/10.1016/j.conbuildmat.2006.11.022
   Web of Science ®Google Scholar
• Ali, A., Abbas, A., Nazzal, M., Alhasan, A., Roy, A., & Powers, D. (2014). Workability evaluation of foamed warm-mix asphalt. Journal of Materials in Civil Engineering, 26(6), Article 04014011. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000904
   Web of Science ®Google Scholar
• ASTM D6926. (2020). Standard practice for preparation of bituminous specimens using marshall apparatus. Annual Book of ASTM Standards, American Society for Testing Materials. https:doi.org/10.1520/D6926-20
   Google Scholar
• Bairgi, B. K., Mannan, U. A., & Tarefder, R. A. (2019). Tribological approach to demonstrate workability of foamed warm-mix asphalt. Journal of Materials in Civil Engineering, 31(9), Article 04019191. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002843
   Web of Science ®Google Scholar
• Bennert, T., Maher, A., & Sauber, R. (2011). Influence of production temperature and aggregate moisture content on the initial performance of warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2208(1), 97–107. https://doi.org/10.3141/2208-13
   Web of Science ®Google Scholar
• Bennert, T., Reinke, G., Mogawer, W., & Mooney, K. (2010). Assessment of workability and compactability of warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2180(1), 36–47. https://doi.org/10.3141/2180-05
   Web of Science ®Google Scholar
• Bhushan, B. (2013). Introduction to tribology (Chapter 8, 2nd ed.). John Wiley & Sons.
   Google Scholar
• Bonaquist, R., Cuciniello, G., Hanz, A., & Bahia, H. (2014). Development of guidelines and specifications for use of WMA technology in delivering HMA products inclusive of non-conventional mixtures such as SMA’s, and mixtures with RAP and RAS content. Wisconsin Highway Research Program, Report No.WHRP 0092-12-02, 232.
   Google Scholar
• Celik, O. N., & Atis, C. D. (2008). Compactibility of hot bituminous mixtures made with crumb rubber-modified binders. Construction and Building Materials, 22(6), 1143–1147. https://doi.org/10.1016/j.conbuildmat.2007.02.005
   Web of Science ®Google Scholar
• Cheraghian, G., Falchetto, A. C., You, Z., Chen, S., Kim, Y. S., Westerhoff, J., Moon, K. H., & Wistuba, M. P. (2020). Warm mix asphalt technology: An up to date review. Journal of Cleaner Production, 268, Article 122128. https://doi.org/10.1016/j.jclepro.2020.122128
   Web of Science ®Google Scholar
• Delgadillo, R., & Bahia, H. U. (2008). Effects of temperature and pressure on hot mixed asphalt compaction: Field and laboratory study. Journal of Materials in Civil Engineering, 20(6), 440–448. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:6(440)
   Web of Science ®Google Scholar
• Diab, A. (2018). Experimental and theoretical investigations on the viscosity of heterogeneous asphalt binders. Journal of Elastomers & Plastics, 50(4), 354–371. https://doi.org/10.1177/0095244317729555
   Web of Science ®Google Scholar
• Dongré, R., Morari, E., & Pyle, R. (2014). Development of a simple test to determine workability and field compaction temperatures of asphalt concrete. Association of Asphalt Paving Technologists, 83, 407–442.
   Google Scholar
• Ghafoori Roozbahany, E., & Partl, M. N. (2016). A new test to study the flow of mixtures at early stages of compaction. Materials and Structures, 49(9), 3547–3558. https://doi.org/10.1617/s11527-015-0738-8
   Web of Science ®Google Scholar
• Gudimettla, J. M., Cooley, L. A., & Brown, E. R. (2004). Workability of hot-mix asphalt. Journal of the Transportation Research Board, 1891(1), 229–237. https://doi.org/10.3141/1891-27
   Google Scholar
• Hanz, A., Faheem, A., Mahmoud, E., & Bahia, H. U. (2010). Measuring effects of warm-mix additives: Use of newly developed asphalt binder lubricity test for the dynamic shear rheometer. Transportation Research Record, 2180(1), 85–92. https://doi.org/10.3141/2180-10
   Web of Science ®Google Scholar
• Hanz, A., Mahmoud, E., & Bahia, H. U. (2011). Asphalt lubricity test evaluation and relationship to mixture workability. In 90th annual meeting of the transportation research board, Washington, DC (23–27).
   Google Scholar
• Hersey, M. D. (1914). The laws of lubrication of horizontal journal bearings. Journal of the Washington Academy of Sciences, 4, 542–552.
   Google Scholar
• Horan, R. D., Chang, G. K., Xu, Q., & Gallivan, V. L. (2012). Improving quality control of Hot-Mix asphalt paving with intelligent compaction technology. Transportation Research Record Journal of the Transportation Research Board 2268(1), 82–91.
   Google Scholar
• Ingrassia, L. P., Lu, X., Canestrari, F., & Ferrotti, G. (2018). Tribological characterization of bituminous binders with warm mix asphalt additives. Construction and Building Materials, 172, 309–318. https://doi.org/10.1016/j.conbuildmat.2018.03.275
   Web of Science ®Google Scholar
• Khatri, A., Bahia, H. U., & Hanson, D. (2001). Mixing and compaction temperatures for modified binder using the superpave gyratory compactor. Journal of the Association of Asphalt Paving Technologists, 70, 368–402.
   Google Scholar
• Little, D. N., Allen, D. H., & Bhasin, A. (2018). Aggregates. In Dallas N. Little, David H. Allen, & Amit Bhasin (Eds.), Modeling and design of flexible pavements and materials. Springer. https://doi.org/10.1007/978-3-319-58443-0_3
   Google Scholar
• Lu, X., Khonsari, M. M., & Gelinck, E. R. (2006). The stribeck curve: Experimental results and theoretical prediction. Journal of Tribology, 128(4), 789–794. https://doi.org/10.1115/1.2345406
   Web of Science ®Google Scholar
• Lu, X., Sjövall, P., Soenen, H., Blom, J., & Makowska, M. (2022). Oxidative aging of bitumen: A structural and chemical investigation. Road Materials and Pavement Design, 23(5), 1091–1106. https://doi.org/10.1080/14680629.2021.1871936
   Web of Science ®Google Scholar
• Marvillet, J., & Bougault, P. (1979). Workability of bituminous mixes: Development of a workability meter. Proceedings of the Association of Asphalt Paving Technologists, 48, 91–110.
   Google Scholar
• McLeod, N. W. (1967). Influence of viscosity of asphalt-cement on compaction of paving mixes in the field. Bituminous and concrete mixes (Highway Research Record, No. 158).
   Google Scholar
• Mulsow, C. (2012). Determination of the degree of gravel aggregate-bitumen coverage by multi-directional reflectance measurements. International Archives of the Photogrammetry,: Remote Sensing and Spatial Information Sciences, XXXIX-B5, 39–43. https://doi.org/10.5194/isprsarchives-XXXIX-B5-39-2012
   Google Scholar
• Namutebi, M., Birgisson, B., & Bagampadde, U. (2011). Foaming effects on binder chemistry and aggregate coatability using foamed bitumen. Road Materials and Pavement Design, 12(4), 821–847. https://doi.org/10.1080/14680629.2011.9713896
   Web of Science ®Google Scholar
• Poeran, N., & Sluer, B. (2016). Workability of asphalt mixtures. In E&E Congress, 6th Eurasphalt & Eurobitume Congress, 1–3 June, Prague, Czech Republic. https://doi.org/10.14311/EE.2016.057
   Google Scholar
• Ryan, J., & Braham, A. (2017). The characterisation of foamed asphalt cement using a rotational viscometer. International Journal of Pavement Engineering, 18(8), 744–752. https://doi.org/10.1080/10298436.2015.1122191
   Web of Science ®Google Scholar
• Saboo, N., Singh, B., Kumar, P., & Vikram, D. (2018). Study on viscosity of conventional and polymer modified asphalt binders in steady and dynamic shear domain. Mechanics of Time-Dependent Materials, 22(1), 67–78. https://doi.org/10.1007/s11043-017-9352-1
   Web of Science ®Google Scholar
• Stachowiak, G., & Batchelor, A. W. (2013). Engineering tribology. Butterworth-Heinemann. ISBN 978-0-12-397047-3.
   Google Scholar
• Stastna, J., Zanzotto, L., & Vacin, O. (2003). Viscosity function in polymer-modified asphalts. Journal of Colloid and Interface Science, 259(1), 200–207. https://doi.org/10.1016/S0021-9797(02)00197-2
   PubMed Web of Science ®Google Scholar
• Sukhija, M., Wagh, V. P., & Saboo, N. (2021). Development of workability based approach for assessment of production temperatures of warm mix asphalt mixtures. Construction and Building Materials, 305, Article 124808. https://doi.org/10.1016/j.conbuildmat.2021.124808
   Web of Science ®Google Scholar
• Tayebal, A., Malpass, G., & Khosla, N. (1998). Effect of mineral filler type and amount on design and performance of asphalt concrete mixtures. Transportion Research Record, 1609(1), 36–43. https://doi.org/10.3141/1609-05
   Google Scholar
• Zelelew, H., Paugh, C., Corrigan, M., Belagutti, S., & Ramakrishnareddy, J. (2013). Laboratory evaluation of the mechanical properties of plant-produced warm-mix asphalt mixtures. Road Materials and Pavement Design, 14(1), 49–70. https://doi.org/10.1080/14680629.2012.735799
   Web of Science ®Google Scholar