References
- AASHTO M 307. (2013). “Silica Fume Used in Cementitious Mixtures”.
- AASHTO T 267-86. “Standard Method of Test for Determination of Organic Content in Soils by Loss of Ignition”, (2018).
- Ahmadi, S., Ghasemzadeh, H., & Changizi, F. (2021). Effects of thermal cycles on microstructural and functional properties of nano treated clayey soil. Engineering Geology, 280, 105929. https://doi.org/10.1016/j.enggeo.2020.105929
- ASTM C1240. Standard specification for silica fume used in cementitious mixtures. West Conshohocken, PA, United State.
- ASTM D1557. Standard test methods for laboratory compaction characteristics of soil using modified effort. United State.
- ASTM D1883. Standard test method for California bearing ratio (CBR). West Conshohocken, PA, United State.
- ASTM D2166. Standard test method for unconfined compressive strength of cohesive soil. West Conshohocken, PA, United State.
- ASTM D2487. Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)”.
- ASTM D2850. Standard test method for unconsolidated-undrained triaxial compression test on cohesive soils. West Conshohocken, PA, United State.
- ASTM D2974. Standard test methods for determining the water (moisture) content, Ash content, and organic material of peat and other organic soils. PA, United State.
- ASTM D422. Standard test method for particle-size analysis of soils. West Conshohocken, PA, United State.
- ASTM D4318. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. United State.
- ASTM D560. Standard test methods for freezing and thawing compacted soil-cement mixtures. West Conshohocken, PA, United State.
- Bowles, J. E. (1992). Engineering properties of soils and their measurement. McGraw-Hill, Inc.
- Chang, I., Kwon, Y. M., & Cho, G. C. (2021). Effect of pore–fluid chemistry on the undrained shear strength of xanthan Gum biopolymer-treated clays. Journal of Geotechnical and Geoenvironmental Engineering, 147(11), 06021013. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002652
- Changizi, F., Ghasemzadeh, H., & Ahmadi, S. (2022). Evaluation of strength properties of clay treated by nano-SiO2 subjected to freeze–thaw cycles. Road Materials and Pavement Design, 23(6), 1221–1238. https://doi.org/10.1080/14680629.2021.1883466
- Edil, T. B., Acosta, H. A., & Benson, C. H. (2006). Stabilizing soft fine-grained soils with fly ash. Journal of Materials in Civil Engineering, 18(2), 283–294. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:2(283)
- El-Maaty, A. E. A. (2016). Enhancing of CBR strength and freeze–thaw performance of silty subgrade using three reinforcement categories. Civil Engineering Journal, 2(3), 73–85. https://doi.org/10.28991/cej-2016-00000014
- Holland, T. C. (2005). Silica fume–User’s manual, US Department of transportation. Federal highway administration. Silica fume association (SFA).
- Iran highway asphalt paving code. no. 234.
- Ju, Y., Tian, K., Liu, H., Reinhardt, H. W., & Wang, L. (2017). Experimental investigation of the effect of silica fume on the thermal spalling of reactive powder concrete. Construction and Building Materials, 155, 571–583. https://doi.org/10.1016/j.conbuildmat.2017.08.086
- Kalkan, E. (2009). Effects of silica fume on the geotechnical properties of fine-grained soils exposed to freeze and thaw. Cold Regions Science and Technology, 58(3), 130–135. https://doi.org/10.1016/j.coldregions.2009.03.011
- Kalkan, E. (2009). Influence of silica fume on the desiccation cracks of compacted clayey soils. Applied Clay Science, 43(3-4), 296–302. https://doi.org/10.1016/j.clay.2008.09.002
- Kupwade-Patil, K., Palkovic, S. D., Bumajdad, A., Soriano, C., & Büyüköztürk, O. (2018). Use of silica fume and natural volcanic ash as a replacement to Portland cement: Micro and pore structural investigation using NMR, XRD, FTIR and X-ray microtomography. Construction and Building Materials, 158, 574–590. https://doi.org/10.1016/j.conbuildmat.2017.09.165
- Meeravali, K., Alla, S., Syed, H., & Ruben, N. (2020). An analysis of freeze-thaw cycles on geotechnical properties of soft-soil. Materials Today: Proceedings, 27, 1304–1309. https://doi.org/10.1016/j.matpr.2020.02.266
- Mohamadabadi, S. D., Moayed, R. Z., & Nozari, M. A. (2019). Mechanical characteristics of sulfated clay stabilized with colloidal silica considering different number of freeze-thaw cycles. Cold Regions Science and Technology, 159, 86–93. https://doi.org/10.1016/j.coldregions.2018.12.007
- Ni, J., Li, S. S., Ma, L., & Geng, X. Y. (2020). Performance of soils enhanced with eco-friendly biopolymers in unconfined compression strength tests and fatigue loading tests. Construction and Building Materials, 263, 120039. https://doi.org/10.1016/j.conbuildmat.2020.120039
- Phanikumar, B. R., m, J. R., & e, R. R. (2020). Silica fume stabilization of an expansive clay subgrade and the effect of silica fume-stabilised soil cushion on its CBR. Geomechanics and Geoengineering, 15(1), 64–77. https://doi.org/10.1080/17486025.2019.1620348
- Puppala, A. J., Congress, S. S., Talluri, N., & Wattanasanthicharoen, E. (2019). Sulfate-heaving studies on chemically treated sulfate-rich geomaterials. Journal of Materials in Civil Engineering, 31(6), 04019076. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002729
- Puppala, A. J., Wattanasantichatoen, E., Intharasombat, L., & Hoyos, L. R. (2003). Studies to understand soil compositional and environmental variables effects on sulfate heave problems. In 12th Pan American Conference on Soil Mechanics and Geotechnical Engineering, 1, 22–26.
- Saygili, A., & Dayan, M. (2019). Freeze-thaw behavior of lime stabilized clay reinforced with silica fume and synthetic fibers. Cold Regions Science and Technology, 161, 107–114. https://doi.org/10.1016/j.coldregions.2019.03.010
- Talluri, N., Puppala, A. J., Congress, S. S., & Banerjee, A. (2020). Experimental studies and modeling of high-sulfate soil stabilization. Journal of Geotechnical and Geoenvironmental Engineering, 146(5), 04020019. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002240
- Tiwari, N., Satyam, N., & Puppala, A. J. (2021). Strength and durability assessment of expansive soil stabilized with recycled ash and natural fibers. Transportation Geotechnics, 29, 100556. https://doi.org/10.1016/j.trgeo.2021.100556
- Tiwari, N., Satyam, N., & Singh, K. (2020). Re-epithelialization and immune cell behaviour in an ex vivo human skin model. Scientific Reports, 10(1), 1–16. https://doi.org/10.1038/s41598-019-56847-4
- Yarbaşi, N., & Kalkan, E. (2020). The mechanical performance of clayey soils reinforced with waste PET fibers. International Journal of Earth Sciences Knowledge and Applications, 2(1), 19–26.
- Zhang, Z., Zhang, B., & Yan, P. (2016). Comparative study of effect of raw and densified silica fume in the paste, mortar and concrete. Construction and Building Materials, 105, 82–93. https://doi.org/10.1016/j.conbuildmat.2015.12.045