256
Views
4
CrossRef citations to date
0
Altmetric
Research Articles

Effect of variability in waste cooking oil on rejuvenation of asphalt

, & ORCID Icon
Pages 511-528 | Received 12 Oct 2022, Accepted 16 May 2023, Published online: 25 May 2023

References

  • AASHTO T316. (2019). Standard method of test for viscosity determination of asphalt binder using rotational viscometer.
  • Ahmad, T., Ahmad, N., Jamal, M., Badin, G., & Suleman, M. (2022). Investigation into possibility of rejuvenating aged asphalt binder using mustard oil. International Journal of Pavement Engineering, 23(6), 1738–1753. https://doi.org/10.1080/10298436.2020.1823388
  • Asli, H., Ahmadinia, E., Zargar, M., & Karim, M. R. (2012). Investigation on physical properties of waste cooking Oil - rejuvenated bitumen binder. Construction and Building Materials, 37, 398–405. https://doi.org/10.1016/j.conbuildmat.2012.07.042
  • Asli, H., & Karim, M. R. (2011). Implementation of waste cooking Oil as RAP rejuvenator. Journal of the Eastern Asia Society for Transportation Studies, 9, 1336–1350. https://doi.org/10.11175/easts.9.1336
  • ASTM D2872 - 19. (n.d.). Standard test method for effect of heat and Air on a moving film of asphalt (rolling thin-film oven test). American Society for Testing and Materials, West Conshohocken, PA, United States.
  • ASTM D5555 - 95. (n.d.). Standard test method for determination of free fatty acids contained in animal, marine, and vegetable fats and oils used in Fat liquors and stuffing compounds. American Society for Testing and Materials, West Conshohocken, PA, United States.
  • ASTM D6521 - 19a. (n.d.). Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). American Society for Testing and Materials, West Conshohocken, PA, United States.
  • ASTM D7175 - 15. (n.d.). Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. American Society for Testing and Materials, West Conshohocken, PA, United States.
  • ASTM D7405 - 15. (n.d.). Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer. American Society for Testing and Materials, West Conshohocken, PA, United States.
  • Azahar, W. N. A. W., Jaya, R. P., Hainin, M. R., Bujang, M., & Ngadi, N. (2016). Chemical modification of waste cooking Oil to improve the physical and rheological properties of asphalt binder. Construction and Building Materials, 126, 218–226. https://doi.org/10.1016/j.conbuildmat.2016.09.032
  • Azahar, W. N. A. W., Jaya, R. P., Hainin, M. R., Bujang, M., & Ngadi, N. (2017). Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking Oil. Construction and Building Materials, 150, 653–663. https://doi.org/10.1016/j.conbuildmat.2017.06.048
  • Azahar, W. N. A. W., Kasim, N., Ismail, N. N., Jaya, R. P., Hainin, M. R., Masri, K. A., Bujang, M., & Al-Saffar, Z. H. (2022). Behaviour of Hot Mix asphalt incorporating untreated and treated waste cooking Oil. International Journal of Pavement Research and Technology, 15(3), 577–588. https://doi.org/10.1007/s42947-021-00038-w
  • Chen, M., Xiao, F., Putman, B., Leng, B., & Wu, S. (2014). High temperature properties of rejuvenating recovered binder with rejuvenator, waste cooking and cotton seed oils. Construction and Building Materials, 59, 10–16. https://doi.org/10.1016/j.conbuildmat.2014.02.032
  • El-Shorbagy, A. M., El-Badawy, S. M., & Gabr, A. R. (2019). Investigation of waste oils as rejuvenators of aged bitumen for sustainable pavement. Construction and Building Materials, 220, 228–237. https://doi.org/10.1016/j.conbuildmat.2019.05.180
  • Foo, W. H., Chia, W. Y., Tang, D. Y. Y., Koay, S. S. N., Lim, S. S., & Chew, K. W. (2021). The conundrum of waste cooking Oil: Transforming hazard into energy. Journal of Hazardous Materials, 417(May), 126129. https://doi.org/10.1016/j.jhazmat.2021.126129
  • Go, R. E., Hwang, K. A., Kim, Y. S., Kim, S. H., Nam, K. H., & Choi, K. C. (2015). Effects of palm and sunflower oils on serum cholesterol and fatty liver in rats. Journal of Medicinal Food, 18(3), 363–369. doi:10.1089/jmf.2014.3163
  • Gong, M., Yang, J., Zhang, J., Zhu, H., & Tong, T. (2016). Physical-chemical properties of aged asphalt rejuvenated by Bio-Oil derived from biodiesel residue. Construction and Building Materials, 105, 35–45. https://doi.org/10.1016/j.conbuildmat.2015.12.025
  • Gurdeniz, G., Tokatli, F., & Ozen, B. (2007). Differentiation of mixtures of monovarietal olive oils by mid-infrared spectroscopy and chemometrics. European Journal of Lipid Science and Technology, 109(12), 1194–1202. https://doi.org/10.1002/ejlt.200700087
  • Hanisah, K., Kumar, S., & Tajul, A. (2013). The management of waste cooking Oil: A preliminary survey. Health and the Environment Journal, 4(1), 76–81.
  • Jain, S., & Chandrappa, A. K. (2022). Rheological and chemical investigation on asphalt binder incorporating high recycled asphalt with waste cooking Oil as rejuvenator. Innovative Infrastructure Solutions, 7(4), https://doi.org/10.1007/s41062-022-00871-3
  • Kim, J. H., Oh, Y. R., Hwang, J., Kang, J., Kim, H., Jang, Y. A., Lee, S. S., Hwang, S. Y., Park, J., & Eom, G. T. (2021). Valorization of waste-cooking Oil into sophorolipids and application of their methyl hydroxyl branched fatty acid derivatives to produce engineering bioplastics. Waste Management, 124, 195–202. https://doi.org/10.1016/j.wasman.2021.02.003
  • Kumaran, P., Mazlini, N., Hussein, I., Nazrain, M., & Khairul, M. (2011). Technical feasibility studies for Langkawi WCO (waste cooking oil) derived-biodiesel. Energy, 36(3), 1386–1393. https://doi.org/10.1016/j.energy.2011.02.002
  • Lei, Z., Bahia, H., Yi-qiu, T., & Ling, C. (2017). Effects of refined waste and Bio-based Oil modifiers on rheological properties of asphalt binders. Construction and Building Materials, 148, 504–511. https://doi.org/10.1016/j.conbuildmat.2017.05.101
  • Lesueur, D. (2009). The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification. Advances in Colloid and Interface Science, 145(1-2), 42–82. https://doi.org/10.1016/j.cis.2008.08.011
  • Lim, S. Y., Mutalib, M. S. A., Khaza’ai, H., & Chang, S. K. (2018). Detection of fresh palm Oil adulteration with recycled cooking Oil using fatty acid composition and FTIR spectral analysis. International Journal of Food Properties, 21(1), 2428–2451. https://doi.org/10.1080/10942912.2018.1522332
  • Liu, Q., Wu, J., Zhou, P., & Oeser, M. (2021). The master-curve band considering measurement and modeling uncertainty for bituminous materials. Advances in Materials Science and Engineering, 2021. Article ID 5543279. https://doi.org/10.1155/2021/5543279
  • Liu, Y., & You, Z. (2008). Determining burger’s model parameters of asphalt materials using creep-recovery testing data. Proceedings of the Symposium on Pavement Mechanics and Materials at the Inaugural International Conference of the Engineering Mechanics Institute – Pavements and Materials 2008: Modeling, Testing, Vol. 334, No. August 2015, pp. 26–36. https://doi.org/10.1061/41008(334)3
  • Lu, X., Soenen, H., & Laukkanen, O. V. (2017). Aging of bituminous binders in asphalt pavements and laboratory tests. Bearing Capacity of Roads, Railways and Airfields – Proceedings of the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields, BCRRA 2017, No. June, 2017, pp. 273–280. https://doi.org/10.1201/9781315100333-40
  • Ma, H., Zhang, Z., Zhao, X., & Wu, S. (2019). A comparative life cycle assessment (LCA) of warm Mix asphalt (WMA) and Hot Mix asphalt (HMA) pavement: A case study in China. Advances in Civil Engineering, 2019, 1–12. https://doi.org/10.1155/2019/9391857
  • Maharaj, R., Ramjattan-Harry, V., & Mohamed, N. (2015). Rutting and fatigue cracking resistance of waste cooking Oil modified trinidad asphaltic materials. The Scientific World Journal, 2015. Article ID 385013. https://doi.org/10.1155/2015/385013
  • Oldham, D., Rajib, A., Dandamudi, K. P. R., Liu, Y., Deng, S., & Fini, E. H. (2021). Transesterification of waste cooking oil to produce a sustainable rejuvenator for aged asphalt. Resources, Conservation and Recycling, 168(August 2020), 105297. https://doi.org/10.1016/j.resconrec.2020.105302
  • Ongel, A., & Hugener, M. (2015). Impact of rejuvenators on aging properties of bitumen. Construction and Building Materials, 94, 467–474. https://doi.org/10.1016/j.conbuildmat.2015.07.030
  • Pradhan, S. K., & Sahoo, U. C. (2019). Performance assessment of aged binder rejuvenated with Polanga Oil. Journal of Traffic and Transportation Engineering (English Edition), 6(6), 608–620. https://doi.org/10.1016/j.jtte.2018.06.004
  • Rodrigues, C., Capit, S., & Picado-santos, L. (2020). Full recycling of asphalt concrete with waste cooking Oil as rejuvenator and LDPE from urban waste as binder modifier. Sustainability, 12(19). https://doi.org/10.3390/su12198222
  • Ruikun, D., Huifang, Y., Mengzhen, Z., Ph, D., Wang, H., & Ph, D. (2022). Preparation of asphalt modifier made of waste tire crumb rubber and waste cooking Oil. Journal of Materials in Civil Engineering, 34(8), 1–11. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004323
  • Shen, Y., Zheng, L., Peng, Y., Zhu, X., Liu, F., Yang, X., & Li, H. (2022). Physicochemical, antioxidant and anticancer characteristics of seed Oil from three chenopodium quinoa genotypes. Molecules, 27(8), 1–14. https://doi.org/10.3390/molecules27082453
  • Sun, Z., Yi, J., Huang, Y., Feng, D., & Guo, C. (2016). Properties of asphalt binder modified by Bio-Oil derived from waste cooking Oil. Construction and Building Materials, 102, 496–504. https://doi.org/10.1016/j.conbuildmat.2015.10.173
  • Taherkhani, H., & Noorian, F. (2020). Comparing the effects of waste engine and cooking Oil on the properties of asphalt concrete containing reclaimed asphalt pavement (RAP). Road Materials and Pavement Design, 21(5), 1238–1257. https://doi.org/10.1080/14680629.2018.1546220
  • Wang, P., Quan Shi, F., Yin Liu, X., Bo Ren, R., Zhu, Y., Sun, H., Shun Zheng, G., Jiao Dong, Z., & Zhi Wang, L. (2019). Role of aliphatic chain characteristics on the anti-cracking properties of polymer-modified asphalt at Low temperatures. Polymers, 11(12), 1–14. https://doi.org/10.3390/polym11122025
  • Wendlinger, C., Hammann, S., & Vetter, W. (2014). Various concentrations of erucic acid in mustard Oil and mustard. Food Chemistry, 153, 393–397. https://doi.org/10.1016/j.foodchem.2013.12.073
  • Williams, B. A., Copeland, A., & Ross, C. T. (2018). Asphalt pavement industry survey on recycled materials and warm-Mix asphalt usage 2017 information series 138 8th annual survey. National Asphalt Pavement Association, July, 131.
  • Yan, S., Zhou, C., & Ouyang, J. (2022a). Rejuvenation effect of waste cooking Oil on the adhesion characteristics of aged asphalt to aggregates. Construction and Building Materials, 327(February), Article 126907. https://doi.org/10.1016/j.conbuildmat.2022.126907
  • Yan, S., Zhou, C., & Sun, Y. (2022b). Evaluation of rejuvenated aged-asphalt binder by waste-cooking Oil with secondary aging considered. Journal of Materials in Civil Engineering, 34(8), 1–13. https://doi.org/10.1061/(asce)mt.1943-5533.0004306
  • Zargar, M., Ahmadinia, E., Asli, H., & Karim, M. R. (2012). Investigation of the possibility of using waste cooking Oil as a rejuvenating agent for aged bitumen. Journal of Hazardous Materials, 254–258, 254–258. https://doi.org/10.1016/j.jhazmat.2012.06.021
  • Zeng, W., Wu, S., Wen, J., & Chen, Z. (2015). The temperature effects in aging index of asphalt during UV aging process. Construction and Building Materials, 93, 1125–1131. https://doi.org/10.1016/j.conbuildmat.2015.05.022
  • Zhang, D., Chen, M., Wu, S., Liu, J., & Amirkhanian, S. (2017). Analysis of the relationships between waste cooking Oil qualities and rejuvenated asphalt properties. Materials, 10(5), 508. https://doi.org/10.3390/ma10050508

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.