Method of evaluation of pavement bitumen adhesion

References

• AASHTO T 182-84. (1984). Standard specification for coating and stripping of bitumen-aggregate mixtures.
   Google Scholar
• AASHTO TP 91. (2015). Standard method of test for determining asphalt binder bond strength by means of the binder bond strength (BBS) test. AASHTO. 1–14.
   Google Scholar
• Abd, D. M., Al-Khalid, H., & Akhtar, R. (2018). Adhesion properties of warm-modified bituminous binders (WMBBs) determined using pull-off tests and atomic force microscopy. Road Materials and Pavement Design, 19(8), 1926–1939. https://doi.org/10.1080/14680629.2017.1374993
   Web of Science ®Google Scholar
• Abraham, H. (1929). Asphalt and allied substances. Van Nostrand.
   Google Scholar
• Aguiar-Moya, J. P., Salazar-Delgado, J., Baldi-Sevilla, A., Leiva-Villacorta, F., & Loria-Salazar, L. (2015). Effect of aging on adhesion properties of asphalt mixtures with the use of bitumen bond strength and surface energy measurement tests. Transportation Research Record: Journal of the Transportation Research Board, 2505(1), 57–65. https://doi.org/10.3141/2505-08
   Web of Science ®Google Scholar
• Arrambide, J., & Duriez, M. (1959). Liants routiers et enrobés: matériaux de protection, plâtre, agglomérés, bois. Dunod.
   Google Scholar
• ASTM D 1075-07. (2007). Standard test method for effect of water on compressive strength of compacted bituminous mixtures. ASTM International.
   Google Scholar
• ASTM D 3625-2012. (2012). Standard practice for effect of water on bituminous-coated aggregate using boiling water. ASTM International.
   Google Scholar
• Bahramian, A. (2012). Evaluating surface energy components of asphalt binders using wilhelmy plate and sessile drop techniques. Royal Institute of Technology.
   Google Scholar
• Bhasin, A. (2007). Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water (Doctoral dissertation. Texas A&M University).
   Google Scholar
• Blackman, B. R., Cui, S., Kinloch, A. J., & Taylor, A. C. (2013). The development of a novel test method to assess the durability of asphalt road–pavement materials. International Journal of Adhesion and Adhesives, 42, 1–10. https://doi.org/10.1016/j.ijadhadh.2012.10.013
   Web of Science ®Google Scholar
• California Test 302. (2017). Method of test for film stripping. State of California. Business, transportation and housing agency.
   Google Scholar
• Canestrari, F., Cardone, F., Graziani, A., Santagata, F. A., & Bahia, H. U. (2010). Adhesive and cohesive properties of asphalt-aggregate systems subjected to moisture damage. Road Materials and Pavement Design, 11(sup1), 11–32. https://doi.org/10.1080/14680629.2010.9690325
   Web of Science ®Google Scholar
• DSTU 6169:2021. (2021). Bitumen and bituminous binders. Determination of resistance to stripping from mineral material. SE “UkrNDNC”.
   Google Scholar
• DSTU B V.2.7-81-98. (1999). Viscous road oil bitumens. The method to determine the index of engagement with the surface of glass and rock materials. State Committee for Construction, Architecture and Housing Policy of Ukraine.
   Google Scholar
• DSTU EN 12697-11:2018 (EN 12697-11:2012, IDT). (2018). Bitumomineral’ni sumishi. Metodi viprobuvannia gariachikh asfal’tobetonnikh sumishei. Chastina 11. Viznachennia zchepliuvanosti mizh zapovniuvachem i bitumom [Bituminous mixtures. Test methods for hot mix asphalt. Part 11: Determination of the affinity between aggregate and bitumen]. Kyiv: SE “UkrNDNC”.
   Google Scholar
• EN 12697-12:2008. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens.
   Google Scholar
• EN 12697-23:2018. (2018). Bituminous mixtures – Test methods – Part 23: Determination of the indirect tensile strength of bituminous specimens.
   Google Scholar
• Ferrotti, G., & Cardone, F. (2013). Caratterizzazione sperimentale dei leganti trasparenti CORES EVIZERO per applicazioni in ambito stradale. Ancona, Università politecnica delle marche.
   Google Scholar
• Fini, E., Al-Qadi, I., & Masson, J. F. (2007). A new blister test to measure bond strength of asphaltic materials. Asphalt Paving Technology-Proceedings, 76, 275–302.
   Google Scholar
• Fini, E. H., & Al-Qadi, I. L. (2011). Development of a pressurized blister test for interface characterization of aggregate highly polymerized bituminous materials. Journal of Materials in Civil Engineering, 23(5), 656–663. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000222
   Web of Science ®Google Scholar
• Gao, Y., Zhang, Y., Gu, F., Xu, T., & Wang, H. (2018). Impact of minerals and water on bitumen-mineral adhesion and debonding behaviours using molecular dynamics simulations. Construction and Building Materials, 171, 214–222. https://doi.org/10.1016/j.conbuildmat.2018.03.136
   Web of Science ®Google Scholar
• Gluhoveria, V. (2008). Research of bonding of binders and crushed materials. Roads and Bridges, 8, 59–67.
   Google Scholar
• Goetz, W. H. (1958). Methods for water resistance of bituminous paving mixtures. Purdue University Lafayette Indiana.
   Google Scholar
• Grenfell, J., Ahmad, N., Liu, Y., Apeagyei, A., Large, D., & Airey, G. (2014). Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage. Road Materials and Pavement Design, 15(1), 131–152. https://doi.org/10.1080/14680629.2013.863162
   Web of Science ®Google Scholar
• Grönniger, J., Wistuba, M. P., & Renken, P. (2010). Adhesion in bitumen-aggregate-systems: New technique for automated interpretation of rolling bottle tests. Road Materials and Pavement Design, 11(4), 881–898. https://doi.org/10.1080/14680629.2010.9690311
   Web of Science ®Google Scholar
• Habal, A., & Singh, D. (2016). Comparison of Wilhelmy plate and Sessile drop methods to rank moisture damage susceptibility of asphalt–aggregates combinations. Construction and Building Materials, 113, 351–358. https://doi.org/10.1016/j.conbuildmat.2016.03.060
   Web of Science ®Google Scholar
• Hicks, R. G. (1991). Moisture damage in asphalt concrete (No. 175). Transportation Research Board.
   Google Scholar
• Horgnies, M., Toubeau, P., Fezai, H., & Darque-Ceretti, E. (2010, September 26–30). Adhesion between aggregates and bitumen characterized by peel tests and surface analyses. 4th World Congress on Adhesion and Related Phenomena.
   Google Scholar
• Isacsson, U., & Jörgensen, T. (1987). Laboratory methods for determination of the water susceptibility of bituminous pavements. Experience gained in the Nordic countries. Statens Väg-och Trafikinstitut. VTI rapport 324 A.
   Google Scholar
• Kandhal, P. S. (1994). Field and laboratory investigation of stripping in asphalt pavements: State of the art report. Transportation Research Record, (1454).
   Google Scholar
• Kennedy, T. W., Roberts, F. L., & Anagnos, J. N. (1984). Texas boiling test for evaluating moisture susceptibility of asphalt mixtures (No. FHWA-TX-85-63 + 253-5). Center for Transportation Research, Bureau of Engineering Research, University of Texas at Austin.
   Google Scholar
• Kiselev, V. P. (2005). Joint use of secondary products of the wood-chemical industry with the material resources of other industries as components of organo-mineral mixtures. Vestnik Orenburgskogo gosudarstvennogo universiteta, (10-2), 126–129.
   Google Scholar
• Klǽbeevne i fundamentale enheder. (1997). Dansk Vejtidsskrift, (3), 9.
   Google Scholar
• Koc, M., & Bulut, R. (2014). Assessment of a sessile drop device and a new testing approach measuring contact angles on aggregates and asphalt binders. Journal of Materials in Civil Engineering, 26(3), 391–398. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000852
   Web of Science ®Google Scholar
• Kolbanovskaja, A. S., & Mihajlov, V. V. (1973). Road bitumen. Transport.
   Google Scholar
• Little, D. N., & Hefer, A. (2005). Adhesion in bitumen-aggregate systems and quantification of the effects of water on the adhesive bond. Texas Transportation Institute.
   Google Scholar
• Lottman, R. P. (1982). Laboratory test methods for predicting moisture-induced damage to asphalt concrete. Transportation Research Record, 843, 88–95.
   Google Scholar
• Lysihina, A. I. (1959). Surface-active additives to improve the water resistance of road surfaces using bitumen and tar. Avtotransizdat.
   Google Scholar
• Majidzadeh, K., & Brovold, F. N. (1968). State of the art: Effect of water on bitumen-aggregate mixtures, Special Report 98, Highway Research Board, National Research Council. National Academy of Sciences, and National Academy of Engineering.
   Google Scholar
• Melson, L. B. (1941). The adhesion of bituminous materials to mineral aggregate. Oregon state college.
   Google Scholar
• Miller, T., Greyling, A., Bahia, H., & Jenkins, K. (2010, October 10–12). Development of a test method for determining emulsion bond strength using the bitumen bond strength (BBS) test: A South African perspective. International Sprayed Sealing Conference, 2ND, 2010, Melbourne, Victoria, Australia.
   Google Scholar
• Nicholls, J. C., Prime, J., Meitei, B., & Lowe, A. (2011). Review of Saturation Ageing Tensile Stiffness (SATS) test for use in Ireland (No. PPR 547).
   Google Scholar
• Nicholson, V. (1932). Adhesion tension in asphalt pavements, its significance and methods applicable in its determination. Roads and Streets. 1932-04, 75(4), 165–173. (No. pp. 28–49).
   Google Scholar
• Polyakov, M. P., & Kostriko, M. T. (1940). Determination of the specific adhesion of binders with stone materials. Road Construction, 12, 33–36.
   Google Scholar
• Porot, L., Besamusca, J., Soenen, H., Apeagyei, A., Grenfell, J., & Sybilski, D. (2016, October 7–9). Bitumen/aggregate affinity – Rilem round Robin test on Rolling Bottle Test. 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials (pp. 153–164). Springer Netherlands.
   Google Scholar
• Pyrig, Y. I., & Galkin, A. V. (2019). Methods of assessing adhesion and cohesion of bituminous binders. HNADU.
   Google Scholar
• Tunnicliff, D. G., & Root, R. E. (1984). Use of antistripping additives in asphaltic concrete mixtures laboratory phase. NCHRP Report. Laboratory Phase.
   Google Scholar
• Vansteenkiste, S., & Soenen, H. (2016). FunDBitS: functional durability-related bitumen specification. Correlations between bitumen and asphalt properties Binder/aggregate interaction (water sensitivity).
   Google Scholar
• Walsh, G., Jamieson, I., Thornton, J., & O’Mahony, M. (1996). A modified SHRP net adsorption test. Eurasphalt & Eurobitume Congress, Strasbourg. 7–10 May 1996. 2. Paper E&E. 4.069.
   Google Scholar
• Wei, J., & Zhang, Y. (2012). Application of sessile drop method to determine surface free energy of asphalt and aggregate. Journal of Testing and Evaluation, 40, 807–813.
   Web of Science ®Google Scholar
• X International Road Congress. (1957). Avtotransizdat.
   Google Scholar
• Zhou, F., Li, H., Chen, P., & Scullion, T. (2014). Laboratory evaluation of asphalt binder rutting, fracture, and adhesion tests (No. FHWA/TX-14/0-6674-1). Dept. of Transportation. Research and Technology Implementation Office.
   Google Scholar
• Zolotarev, V. A., & Ageeva, E. N. (1995). On the assessment of bitumen adhesion to the surface of mineral material. Automobile Roads, 12, 13–15.
   Google Scholar