Evaluation of drastic temperature change on temperature stress of asphalt mixture during microwave deicing

References

• Benedetto, A., & Calvi, A. (2013). A pilot study on microwave heating for production and recycling of road pavement materials. Construction and Building Materials, 44(44), 351–359. https://doi.org/10.1016/j.conbuildmat.2013.02.082
   Google Scholar
• Ding, L., Wang, X., Cui, X., Zhang, M., & Chen, B. (2021). Development and performance research of new sensitive materials for microwave deicing pavement at different frequencies. Cold Regions Science and Technology, 181(181), 103176. https://doi.org/10.1016/j.coldregions.2020.103176
   Google Scholar
• Du, Y., Huang, W., & Liu, W. (2022). Using silicon carbide to increase thermal conductivity of cement composite for improving heating efficiency of floor heating system. Construction and Building Materials, 325(325), 126707. https://doi.org/10.1016/j.conbuildmat.2022.126707
   Google Scholar
• Gao, J., Sha, A., Wang, Z., Tong, Z., & Liu, Z. (2017). Utilization of steel slag as aggregate in asphalt mixtures for microwave deicing. Journal of Cleaner Production, 152(152), 429–442. https://doi.org/10.1016/j.jclepro.2017.03.113
   Google Scholar
• González, A., Norambuena-Contreras, J., Storey, L., & Schlangen, E. (2018). Effect of rap and fibers addition on asphalt mixtures with self-healing properties gained by microwave radiation heating. Construction and Building Materials, 159(159), 164–174. https://doi.org/10.1016/j.conbuildmat.2017.10.070
   Google Scholar
• Guo, D. (2011). Research on techniques of snow- melting and deicing pavement basing on microwave and magnet coupling effect. Chang'an University.
   Google Scholar
• Guo, S. (2019). Crack analysis and COMSOL simulation of concrete under temperature effect. Sichuan Building Science, 45(1), 1–4. https://doi.org/10.19794/j.cnki.1008-1933.2019.01.001
   Google Scholar
• Han, D., Liu, G., Zhao, Y., Pan, Y., & Yang, T. (2021). Research on thermal properties and heat transfer of asphalt mixture based on 3d random reconstruction technique. Construction and Building Materials, 270, 121393.
   Web of Science ®Google Scholar
• Huang, H. (2010). Thermophysical properties and test of asphalt and asphalt mixture. Changsha University of Science & Technology.
   Google Scholar
• JTG E-20-2011. (2011). Standard test methods of bitumen and bituminous mixtures for highway engineering. Research Institute of Highway Ministry of Transport.
   Google Scholar
• Jung, S., Kwak, J. H., & Han, S. M. (2021). Guided-wavelength-controlled dynamic microwave heating in a near-cutoff waveguide. Applied Thermal Engineering, 188, 116630.
   Web of Science ®Google Scholar
• Li, C., Wu, S., Chen, Z., Tao, G., & Xiao, Y. (2018). Improved microwave heating and healing properties of bitumen by using nanometer microwave-absorbers. Construction and Building Materials, 189(189), 757–767. https://doi.org/10.1016/j.conbuildmat.2018.09.050
   Google Scholar
• Li, W., Ye, J., Yang, Y., & Zhu, H. (2023). Double-ridged waveguide for efficiently heating ultrafine filament fibers. International Journal of Heat and Mass Transfer, 200, 123543.
   Web of Science ®Google Scholar
• Liu, J., Wang, Z., Guo, H., & Yan, F. (2021b). Thermal transfer characteristics of asphalt mixtures containing hot poured steel slag through microwave heating. Journal of Cleaner Production, 308, 127225.
   Web of Science ®Google Scholar
• Liu, X., Yan, D., Zhao, Y., & Wei, Z. (2021a). Research on SiC sand as fine aggregate to reinforce thermal performance of asphalt concrete. Journal of Central South University (Science and Technology), 52(7), 2459–2469. https://doi.org/10.11817/j.issn.1672-7207.2021.07.031
   Google Scholar
• Liu, X., Zhao, Y., & Yan, D. (2023). An environmentally friendly asphalt concrete containing SiC aggregate for microwave heating deicing. Journal of Materials in Civil Engineering, 35(10). https://doi.org/10.1061/JMCEE7/MTENG-16230
   Web of Science ®Google Scholar
• Luo, W., Huang, S., Liu, Y., Peng, H., & Ye, Y. (2022). Three-dimensional mesostructure model of coupled electromagnetic and heat transfer for microwave heating on steel slag asphalt mixtures. Construction and Building Materials, 330, 127235.
   Web of Science ®Google Scholar
• Ma, X., Chen, H., Gao, G., Xing, M., & Niu, D. (2019). Investigation of viscoelastoplastic behavior of asphalt mastic: Effects of shear strain rate and filler volume fraction. Construction and Building Materials, 200(200), 559–569. https://doi.org/10.1016/j.conbuildmat.2018.12.080
   Google Scholar
• Pandurang, W., Sayeed, O., & Sundararajan, G. (2022). Influence of SiC reinforcement content and heat treatment on the corrosion behavior of pulsed electrodeposited Ni-W alloy metal matrix composite. Materialia, 22(22), 101390. https://doi.org/10.1016/j.mtla.2022.101390
   Google Scholar
• Sajid, H., Naik, S., & Kiran, R. (2021). Improving the ice-melting capacity of traditional deicers. Construction and Building Materials, 271(271), 121527. https://doi.org/10.1016/j.conbuildmat.2020.121527
   Google Scholar
• Solorzano, E., Reglero, J. A., Rodriguez-Perez, M. A., Lehmhus, D., Wichmann, M., & De Saja, J. A. (2008). An experimental study on the thermal conductivity of aluminium foams by using the transient plane source method. International Journal of Heat and Mass Transfer, 51(25-26), 6259–6267. https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.062
   Web of Science ®Google Scholar
• Song, Y. (2010). Load stress analysis of asphalt pavement considering temperature effect. Chang'an University.
   Google Scholar
• Suleiman, B. (2011). Measurements of thermal conduction in partially saturated specimens using the transient Hot-disk technique. Journal of Testing and Evaluation: A Multidisciplinary Forum for Applied Sciences and Engineering, 39(4), 529–534. https://doi.org/10.1520/JTE103189
   Google Scholar
• Tang, S., Deng, J., Wang, S., & Liu, W. (2009). Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2⁃SiC composites. Corrosion Science, 51(1), 54–61. https://doi.org/10.1016/j.corsci.2008.09.037
   Web of Science ®Google Scholar
• Wang, L., Hu, H., Ma, B., & Chu, K. (2010). Analysis of influence factor on thermal stress of asphalt pavement structure on Qinghai-Tibet highway. Journal of Chang’an University (Natural Science Edition), 30(4), 28–33. https://doi.org/10.19721/j.cnki.1671-8879.2010.04.006
   Google Scholar
• Wang, Y. (2018). A numberical method of predicting the elastic mudulus of asphlat concrete. Zhejiang University of Technology.
   Google Scholar
• Wang, Z., Wang, H., An, A., Ai, T., & Zhao, P. (2016). Laboratory investigation on deicing characteristics of asphalt mixtures using magnetite aggregate as microwave-absorbing materials. Construction and Building Materials, 124(124), 589–597. https://doi.org/10.1016/j.conbuildmat.2016.07.137
   Google Scholar
• Xie, P., & Wang, H. (2020). Analysis of temperature variation and thermally-induced reflective cracking potential in composite pavements. Transportation Research Record: Journal of the Transportation Research Board, 2674(10), 177–188. https://doi.org/10.1177/0361198120941848
   Web of Science ®Google Scholar
• Yan, X., Chen, L., You, Q., & Fu, Q. (2018). Experimental analysis of thermal conductivity of semi-rigid base asphalt pavement. Road Materials and Pavement Design, 20(5), 1215–1227. https://doi.org/10.1080/14680629.2018.1431147
   Web of Science ®Google Scholar
• Yu, Y. (2011). Development and prospect of pavement active ice (snow) melting technology. Journal of Shanghai Jiaotong University, 45(S1), 86–89. https://doi.org/10.16183/j.cnki.jsjtu.2011.s1.019
   Google Scholar
• Yu, Z., Zhang, F., Ma, X., Yang, F., Hu, D., & Zhou, H. (2021). Experimental study on thermal expansion behavior of concrete under three-dimensional stress. Advances in Civil Engineering, 2021, 5597918.
   Web of Science ®Google Scholar
• Zhang, J., Yan, Y., Hu, Z., Fan, X., & Zheng, Y. (2018). Utilization of low-grade pyrite cinder for synthesis of microwave heating ceramics and their microwave deicing performance in dense-graded asphalt mixtures. Journal of Cleaner Production, 170(170), 486–495. https://doi.org/10.1016/j.jclepro.2017.09.175
   Google Scholar
• Zhao, Y., Li, G., Fan, C., Pang, W., & Wang, Y. (2021). Effect of thermal parameters on hydration heat temperature and thermal stress of mass concrete. Advances in Materials Science and Engineering, 2021, 5541181.
   Web of Science ®Google Scholar
• Zhu, H., Lei, L., Fan, S., & Chen, R. (2021). Review of research on influence factors of asphalt pavement thermal stress. Science Technology and Engineering, 21(13), 5188–5200.
   Google Scholar
• Zimmermann, J., Hilmas, G., Fahrenholtz, W., Dinwiddie, R., & Wang, H. (2010). Thermophysical properties of ZrB2 and ZrB2–SiC ceramics. Journal of the American Ceramic Society, 91(5), 1405–1411. https://doi.org/10.1111/j.1551-2916.2008.02268.x
   Web of Science ®Google Scholar