Development of permanent magnet MnAlC/polymer composites and flexible filament for bonding and 3D-printing technologies

References

• Jackson N , Pedrosa FJ , Bollero A , et al . Integration of thick-film permanent magnets for MEMS applications. J Microelectromech Syst. 2016;25:716–724.10.1109/JMEMS.2016.2574958
   Web of Science ®Google Scholar
• Grant PS , Castles F , Lei Q , et al . Manufacture of electrical and magnetic graded and anisotropic materials for novel manipulations of microwaves. Phil Trans R Soc A. 2015;373:20140353.10.1098/rsta.2014.0353
   Web of Science ®Google Scholar
• Kokkinis D , Schaffner M , Studart AR . Multimaterial magnetically assisted 3D printing of composite materials. Nat Commun. 2015;6:481.10.1038/ncomms9643
   Web of Science ®Google Scholar
• Zuniga J , Katsavelis D , Peck J , et al . Cyborg beast: a low-cost 3D-printed prosthetic hand for children with upper-limb differences. BMC Res Notes. 2015;8:10.10.1186/s13104-015-0971-9
   PubMedGoogle Scholar
• Castles F , Isakov D , Lui A , et al . Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites. Sci Rep. 2016;6:2601.10.1038/srep22714
   Web of Science ®Google Scholar
• Huang R , Riddle M , Graziano D , et al . Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. J Clean Prod. 2016;135:1559–1570.10.1016/j.jclepro.2015.04.109
   Web of Science ®Google Scholar
• Murr LE . Frontiers of 3D printing/additive manufacturing: from human organs to aircraft fabrication. J Mater Sci Technol. 2016;32:987–995.10.1016/j.jmst.2016.08.011
   Web of Science ®Google Scholar
• Fu K , Yao Y , Dai J , et al . Progress in 3D printing of carbon materials for energy-related applications. Adv Mater. 2017;29:1603486.10.1002/adma.201603486
   Web of Science ®Google Scholar
• Matsuzaki R , Ueda M , Namiki M , et al . Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep. 2016;6:307.10.1038/srep23058
   Web of Science ®Google Scholar
• Wang X , Jiang M , Zhou Z , et al . 3D printing of polymer matrix composites: a review and prospective. Composites Part B. 2017;110:442–458.10.1016/j.compositesb.2016.11.034
   Web of Science ®Google Scholar
• Li L , Tirado A , Nlebedim I , et al . Big area additive manufacturing of high performance bonded NdFeB magnets. Sci Rep. 2016;6:418.10.1038/srep36212
   Web of Science ®Google Scholar
• Huber C , Abert C , Bruckner F , et al . 3D print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer. Appl Phys Lett. 2016;109:162401.10.1063/1.4964856
   Web of Science ®Google Scholar
• Lewis LH , Jiménez-Villacorta F . Perspectives on permanent magnetic materials for energy conversion and power generation. Metall Mater Trans A. 2013;44:2–20.10.1007/s11661-012-1278-2
   Google Scholar
• Zeng Q , Baker I , Cui J , et al . Structural and magnetic properties of nanostructured Mn–Al–C magnetic materials. J Magn Magn Mater. 2007;308:214–226.10.1016/j.jmmm.2006.05.032
   Web of Science ®Google Scholar
• Jiménez-Villacorta F , Marion JL , Oldham JT , et al . Magnetism-structure correlations during the ε → τ transformation in rapidly-solidified MnAl nanostructured alloys. Metals. 2014;4:8–19.10.3390/met4010008
   Web of Science ®Google Scholar
• Manchanda P , Kashyap A , Shield JE , et al . Magnetic properties of Fe-doped MnAl. J Magn Magn Mater. 2014;365:88–92.10.1016/j.jmmm.2014.04.007
   Web of Science ®Google Scholar
• Park J , Hong Y , Bae S , et al . Saturation magnetization and crystalline anisotropy calculations for MnAl permanent magnet. J Appl Phys. 2010;107:09A731.10.1063/1.3337640
   Web of Science ®Google Scholar
• Rial J , Villanueva M , Céspedes E , et al . Application of a novel flash-milling procedure for coercivity development in nanocrystalline MnAl permanent magnet powders. J Phys D: Appl Phys. 2017;50:105004.10.1088/1361-6463/aa57a1
   Web of Science ®Google Scholar
• Law J , Rial J , Villanueva M , et al . Study of phases evolution in high-coercive MnAl powders obtained through short milling time of gas-atomized particles. J Alloys Compd. 2017;712:373–378.10.1016/j.jallcom.2017.04.038
   Web of Science ®Google Scholar
• Chaturvedi A , Yaqub R , Baker I . Microstructure and magnetic properties of bulk nanocrystalline MnAl. Metals. 2014;4:20–27.10.3390/met4010020
   Web of Science ®Google Scholar
• Chatuverdi A , Yaqub R , Baker I . A comparison of τ-MnAl particulates produced via different routes. J Phys: Condens Matter. 2014;26:064201.
   PubMed Web of Science ®Google Scholar
• Qureshi A , Mergen A , Eroğlu MS , et al . Dielectric properties of polymer composites filled with different metals. J Macromol Sci Phys Part A. 2008;45:462–469.10.1080/10601320801977756
   Web of Science ®Google Scholar
• Lin Y , Xu H , Wang Z , et al . Transferable and flexible resistive switching memory devices based on PMMA films with embedded Fe3O4 nanoparticles. Appl Phys Lett. 2017;110:193503.10.1063/1.4983382
   Web of Science ®Google Scholar
• Huber C , Abert C , Bruckner F , et al . 3D printing of polymer-bonded rare-earth magnets with a variable magnetic compound fraction for a predefined stray field. Sci Rep. 2017;7:215.10.1038/s41598-017-09864-0
   PubMed Web of Science ®Google Scholar
• Wong SL , Ngadi N , Abdullah TAT . Study on dissolution of low density polyethylene (LDPE). Appl Mech Mater. 2015;695:170–173.
   Google Scholar
• Achilias DS , Roupakias C , Megalokonomos P , et al . Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP). J Hazard Mater. 2007;149(3):536–542.10.1016/j.jhazmat.2007.06.076
   PubMed Web of Science ®Google Scholar