Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing

References

• Ma E, Zhu T. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals. Mater Today. 2017;20:323–331.
   Web of Science ®Google Scholar
• Miyazaki I, Furuta T, Oh-ishi K, et al. Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel. Mater Sci Eng A. 2018;721:74–80.
   Web of Science ®Google Scholar
• Wang Y, Chen M, Zhou F, et al. High tensile ductility in a nanostructured metal. Nature. 2002;419:912–915.
   PubMed Web of Science ®Google Scholar
• Azizi-Alizamini H, Militzer M, Poole WJ. A novel technique for developing bimodal grain size distributions in low carbon steels. Scripta Mater. 2007;57:1065–1068.
   Web of Science ®Google Scholar
• Kimura Y, Inoue T, Yin F, et al. Toughening of a 1500MPa class steel through formation of an ultrafine fibrous grain structure. Scripta Mater. 2007;57:465–468.
   Web of Science ®Google Scholar
• Sawangrat C, Kato S, Orlov D, et al. Harmonic-structured copper: performance and proof of fabrication concept based on severe plastic deformation of powders. J Mater Sci. 2014;49:6579–6585.
   Web of Science ®Google Scholar
• Yu H, Watanabe I, Ameyama K. Deformation behavior analysis of harmonic structure materials by multi-scale finite element analysis. Adv Mater Res. 2015;1088:853–857.
   Google Scholar
• Vajpai SK, Yu H, Ota M, et al. Three-dimensionally gradient and periodic harmonic structure for high performance advanced structural materials. Mater Trans. 2016;57:1424–1432.
   Web of Science ®Google Scholar
• Emura S, Tsuzaki K, Tsuchiya K. Improvement of room temperature ductility for Mo and Fe modified Ti2AlNb alloy. Mater Sci Eng A. 2010;528:355–362.
   Web of Science ®Google Scholar
• Ruzic J, Emura S, Ji X, et al. Mo segregation and distribution in Ti Mo alloy investigated using nanoindentation. Mater Sci Eng A. 2018;718:48–55.
   Web of Science ®Google Scholar
• Koseki T, Inoue J, Nambu S. Development of multilayer steels for improved combinations of high strength and high ductility. Mater Trans. 2014;55:227–237.
   Web of Science ®Google Scholar
• Ojima M, Inoue J, Nambu S, et al. Stress partitioning behavior of multilayered steels during tensile deformation measured by in situ neutron diffraction. Scripta Mater. 2012;66:139–142.
   Web of Science ®Google Scholar
• Kim I-K, Hong SI. Roll-bonded tri-layered Mg/Al/stainless steel clad composites and their deformation and fracture behavior. Metal Mater Trans A. 2013;44:3890–3900.
   Web of Science ®Google Scholar
• Inoue J, Sadeghi A, Kyokuta N, et al. Multilayer Mg–stainless steel sheets, microstructure, and mechanical properties. Metal Mater Trans A. 2017;48:2483–2495.
   Web of Science ®Google Scholar
• Sadeghi A, Inoue J, Kyokuta N, et al. In situ deformation analysis of Mg in multilayer Mg–steel structures. Mater Design. 2017;119:326–337.
   Web of Science ®Google Scholar
• Voigt W. Lehrbuch der Kristallphysik. Leipzig: Teubner-Verlag; 1910.
   Google Scholar
• Reuss A. Calculation of flow limits of mixed crystals on the basis of plasticity of single crystals. Zeitschrift fur angewandte Mathematik und Mechanik. 1929;9:49–58.
   Google Scholar
• Hashin Z, Shtrikman S. A variational approach to the theory of the elastic behaviour of multiphase materials. J Mech Phys Solids. 1963;11:127–140.
   Web of Science ®Google Scholar
• Watanabe I, Nakamura G, Yuge K, et al. Maximization of strengthening effect of microscopic morphology in duplex steels. In: Altembach H, Matsuda T, Okumura D, editors. Advanced structured materials: from creep damage mechanics to homogenization methods. Ch.24. Springer International Publishing; 2015. p. 541–555.
   Google Scholar
• Matsuno T, Yoshioka T, Watanabe I, et al. Three-dimensional finite element analysis of representative volume elements for characterizing the effects of martensite elongation and banding on tensile strength of ferrite-martensite dual-phase steels. Int J Mech Sci. in press;2020:150.
   Google Scholar
• Watanabe I, Terada K. A method of predicting macroscopic yield strength of polycrystalline metals subjected to plastic forming by micro–macro de-coupling scheme. Int J Mech Sci. 2010;52:343–355.
   Web of Science ®Google Scholar
• Watanabe I, Setoyama D, Nagasako N, et al. Multiscale prediction of mechanical behavior of ferrite–pearlite steel with numerical material testing. Int J Numer Meth Eng. 2012;89:829–845.
   Web of Science ®Google Scholar
• Huang SH, Liu P, Mokasdar A, et al. Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Tech. 2013;67:1191–1203.
   Web of Science ®Google Scholar
• Sugavaneswaran M, Arumaikkannu G. Modelling for randomly oriented multi-material additive manufacturing component and its fabrication. Mater Design. 2014;54:779–785.
   Web of Science ®Google Scholar
• Bandyopadhyay A, Heer B. Additive manufacturing of multi-material structures. Mater Sci Eng R. 2018;129:1–16.
   Web of Science ®Google Scholar
• Baufeld B, Brandl E, Biest OVD. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti6Al-4V components fabricated by laser-beam deposition and shaped metal deposition. J Mater Process Tech. 2011;211:1146–1158.
   Web of Science ®Google Scholar
• Mehnen J, Ding J, Lockett H, et al. Design study for wire and arc additive manufacture. Int J Product Develop. 2014;19:2–20.
   Google Scholar
• Williams SW, Martina F, Addison AC, et al. Wire+arc additive manufacturing. Mater Sci Tech. 2016;32:641–647.
   Web of Science ®Google Scholar
• Li JLZ, Alkahari MR, Rosli NAB, et al. Review of wire arc additive manufacturing for 3D metal printing. Int J Auto Tech. 2019;13:346–353.
   Web of Science ®Google Scholar
• Wang F, Williams S, Colegrove P, et al. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V. Metal Mater Trans A. 2013;44:968–977.
   Web of Science ®Google Scholar
• Shen C, Pan Z, Ma Y, et al. Fabrication of iron-rich Fe–Al intermetallics using the wire-arc additive manufacturing process. Additive Manuf. 2015;7:20–26.
   Web of Science ®Google Scholar
• ISO 14577-1. 2015. Metallic materials – instrumented indentation test for hardness and materials parameters – part 1: test method. 2nd ed. Geneva: International Organization for Standardization.
   Google Scholar
• Oliver WC, Pharr GM. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res. 2004;19:3–20.
   Web of Science ®Google Scholar
• Goto K, Watanabe I, Ohmura T. Determining suitable parameters for inverse estimation of plastic properties based on indentation marks. Int J Plast. 2019;116:81–90.
   Web of Science ®Google Scholar
• Goto K, Watanabe I, Ohmura T. Inverse estimation approach for elastoplastic properties using the load-displacement curve and pile-up topography of a single Berkovich indentation. Mater Des 2020. 194:article number 108925.
   Google Scholar
• Taljat B, Pharr GM. Development of pile-up during spherical indentation of elastic-plastic solids. Int J Solids Struct. 2004;41:3891–3904.
   Web of Science ®Google Scholar
• Renner E, Gaillard Y, Richard F, et al. Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel. Int J Plast. 2016;77:118–140.
   Web of Science ®Google Scholar
• Stringfellow RG, Parks DM, Olson GB. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels. Acta Metal Mater. 1992;40:1703–1716.
   Google Scholar
• Krauss G. Steels: processing, structure, and performance. 2nd ed. ASM International; 2015.
   Google Scholar