References
- Afriyie, A. O., E. K. Howard, B. K. Asinyo, W. Badoe, R. K. Seidu, and E. Apau. 2021. “Electronic Warp-Break Detection Mechanism for Manual Looms.” Research Journal of Textile and Apparel 25 (4): 361–379. doi:https://doi.org/10.1108/RJTA-06-2020-0067.
- Alabi, O. A., K. I. Ologbonjaye, O. Awosolu, and O. E. Alalade. 2019. “Public and Environmental Health Effects of Plastic Wastes Disposal: A Review.” Journal of Toxicology and Risk Assessment 5 (021): 1–13.
- Alberghini, M., S. Hong, L. M. Lozano, V. Korolovych, Y. Huang, F. Signorato, S. H. Zandavi, et al. 2021. “Sustainable Polyethylene Fabrics with Engineered Moisture Transport for Passive Cooling.” Nature Sustainability 4 (8): 715–724. doi:https://doi.org/10.1038/s41893-021-00688-5.
- Andrady, A. L., and M. A. Neal. 2009. “Applications and Societal Benefits of Plastics.” Philosophical Transactions of the Royal Society B: Biological Sciences 364 (1526): 1977–1984.
- Barnes, S. 2019. Artist Embroiders on the Ubiquitous Plastic Bag to Transform It into an Abstract Work of Art. Available at: https://www.brwnpaperbag.com/2019/12/31/josh-blackwell-plastic-bag-art/ (Accessed July 13).
- Basmage, O. M., and M. S. J. Hashmi. 2020. “Plastic Products in Hospitals and Healthcare Systems.” In Encyclopedia of Renewable and Sustainable Materials, edited by S. Hashmi and I. A. Choudhury, 648–657. Oxford: Elsevier.
- Boateng, S., B. K. Asinyo, E. K. Howard, E. Apau, and R. K. Seidu. 2021. “Textile Art Creation as a Tool for Raising Awareness of Corruption in Ghana.” Textile & Leather Review 4 (2): 111–127.
- Chirayil, C. J., J. Joy, H. J. Maria, I. Krupa, and S. Thomas. 2016. “Polyolefins in Automotive Industry.” In Polyolefin Compounds and Materials, edited by M. Al-Ali AlMa'adeed and I. Krupa, 265–283. Cham: Springer. https://doi.org/https://doi.org/10.1007/978-3-319-25982-6_11.
- Chow, C. F., W. M. W. So, T. Y. Cheung, and S. K. D. Yeung. 2017. “Plastic Waste Problem and Education for Plastic Waste Management.” In Emerging Practices in Scholarship of Learning and Teaching in a Digital Era, edited by S. Kong, T. Wong, M. Yang, C. Chow, and K. Tse, 125–140. Singapore: Springer. https://doi.org/https://doi.org/10.1007/978-981-10-3344-5_8.
- Dahl, O. N. 2015. What is the Right Soldering Temperature?. Available at: https://www.build-electronic-circuits.com/right-soldering-temperature/ (Accessed July 13).
- Dhakal, H. N., and S. O. Ismail. 2021. “1 - Introduction to Composite Materials.” In Sustainable Composites for Lightweight Applications, edited by H. N. Dhakal and S. O. Ismail, 1–16. Duxford: Woodhead Publishing.
- Eriksen, M., M. Thiel, M. Prindiville, and T. Kiessling. 2018. “Microplastic: What are the Solutions.” In Freshwater Microplastics edited by M. Wagner and S. Lambert, 273–298. Cham: Springer.
- Frimpong, C., R. K. Seidu, and P. A. Agyei. 2017. “A Manual Beaming Device: An Improved Method for Warp Winding in Broadloom Weaving.” AFRREV IJAH: An International Journal of Arts and Humanities 6 (3): 141–155.
- Haji Musa, A., B. Malengier, S. Vasile, and L. Van Langenhove. 2018. “Practical Considerations of the FTT Device for Fabric Comfort Evaluation.” Journal Fashion Technology & Textile Engineering 4 (S4): 003. doi:https://doi.org/10.4172/2329-9568.S4-003.
- Howard, E. K., C. Frimpong, and R. K. Seidu. 2019. “Risk Assessment of Attitudes and Practices of Students and Practitioners toward Studio Dyeing in Ghana.” Research Journal of Textile and Apparel 23 (3): 189–200.
- Khanam, P. N., and M. A. A. AlMaadeed. 2015. “Processing and Characterization of Polyethylene-Based Composites.” Advanced Manufacturing: Polymer & Composites Science 1 (2): 63–79.
- Kim, D. Y. 2019. “A Design Methodology using Prototyping Based on the Digital-Physical Models in the Architectural Design Process.” Sustainability 11 (16): 4416.
- Klyosov, A. A. 2007. Wood-plastic Composites. Hoboken, NJ: John Wiley & Sons.
- Lisa, A. 2011. Precious Waste: Plastic Shopping Bags Recycled into a New Durable Textile. Available at: https://inhabitat.com/precious-waste-plastic-shopping-bags-recycled-into-a-new-durable-textile/ (Accessed July 13).
- Mace, M.-A., and T. Ward. 2002. “Modeling the Creative Process: A Grounded Theory Analysis of Creativity in the Domain of Art Making.” Creativity Research Journal 14 (2): 179–192.
- Manjula, B., Reddy, A. B., Sadiku, E. R., Sivanjineyulu, V., Molelekwa, G. F., Jayaramudu, J. and Kumar, K. R. 2017. “18 - Use of Polyolefins in Hygienic Applications.” In Polyolefin Fibres (Second Edition), edited by S. C. O. Ugbolue, 539–560. London: Woodhead Publishing.
- Markovicová, L., Zatkalíková, V., Kojnoková, T., Gana, D. and Liptáková, T. 2020. “The Physical–Mechanical Properties of Low-Density Polyethylene Films.” IOP Conference Series: Materials Science and Engineering. IOP Publishing, 012008.
- McCartney, I. 2019. The Advantages and Disadvantages of Polyethylene. Available at: https://kempner.co.uk/2019/05/08/the-advantages-and-disadvantages-of-polyethylene-blog/ (Accessed February 27).
- Mlandu, O. 2018. Cities and Countires that have Banned Plastic. Available at: https://www.getaway.co.za/travel-news/countries-that-have-banned-plastic/ (Accessed August 19).
- Mohinani, G. 2018. Plastics & Packaging - Ghana Poly Products Ghana Limited Poly Sacks Ghana Limited Poly Tanks Ghana Limited. Available at: http://www.mohinani.com/content/docontent/103 (Accessed April 30).
- Ngai, J. 2019. Creativity: Rethinking the Exploration Phase of Design Available at: https://webdesign.tutsplus.com/articles/rethinking-the-exploration-phase-of-design–cms-33489 (Accessed July 13).
- Nusselder, J. 2021. How to Weld Plastic with a Soldering Iron. Available at: https://toolsdoctor.com/how-to-weld-plastic-with-a-soldering-iron/ (Accessed August 13).
- Philpott, L. 2021. Knotting. Available at: https://fashion-history.lovetoknow.com/clothing-closures-embellishments/knotting (Accessed August 13).
- Saklad, A. 2020. From Plastic to Profit: Solutions to Plastic Pollution in Ghana. Available at: https://www.borgenmagazine.com/plastic-pollution-in-ghana/ (Accessed August 19).
- Tiwari, V., and G. Shrivastava. 2013. “Automatic Fabric Fault Detection by Applying Series of Morphological Operations on a Single Bit Plane.” International Journal of Research in Advent Technology 1 (4): 141–150.
- Vasile, C., and M. Pascu. 2005. Practical Guide to Polyethylene. Shawbury: iSmithers Rapra Publishing.
- Yani, I., D. Rosiliani, B. Khona'ah, and F. A. Almahdini. 2020. “Identification and Plastic Type and Classification of PET, HDPE, and PP Using RGB Method.” IOP Conference Series: Materials Science and Engineering. IOP Publishing, 012015.
- Young, R. J., and P. A. Lovell. 2011. Introduction to Polymers. Boca Raton: CRC Press.