References
- Al-Obaid, Y. F. 1995. The effect of shot peening on stress corrosion cracking behaviour of 2205-duplex stainless steel, Engineering Fracture Mechanics, 51, (1), 19–25.10.1016/0013-7944(94)00213-2
- Atrens, A., Brosnan, C., Ramamurthy, S., Oelhlert, A. and Smith, I. 1993. Linearly increasing stress test (LIST) for SCC research, Measurement Science & Technology, 4, 1281–1292.10.1088/0957-0233/4/11/017
- Atrens, A. and Wang, Z. F. (1995). Stress corrosion cracking, Materials Forum, 19, 9–34.
- Chen, H. 2013. Stress corrosion cracking of rockbolts in underground coal mines, Masters thesis, School of Materials Science and Engineering, UNSW Australia, Sydney, Australia.
- Craig, P., Saydam, S., Hagan, P. C., Hebblewhite, B., Vandermaat, D., Crosky, A. and Elias, E. 2014. Investigation into the corrosive environments to which underground coal mine rock bolts are exposed. In S. Saydam and P. C. Hagan (Eds.), The 3rd Australasian ground control in mining conference (AusRock2014), Sydney, AusIMM. pp. 277–286.
- Crosky, A., Fabjanczyk, M., Gray, P. and Hebblewhite, B. 2002. Premature rock bolt failure, Report, ACARP Project No. C8008.
- Crosky, A., Smith, B., Elias, E., Chen, H., Craig, P., Hagan, P., Vandermaat, D., Saydam, S. and Hebblewhite, B. 2012. Stress corrosion cracking failure of rockbolts in underground mines in australia. In 7th International symposium rockbolting and rock mechanics in mining, BBK, Institute of Mining Engineering, Archen, Germany 335–348.
- Dorion, J. F. and Hadjigeorgiou, J. 2014. Corrosion considerations in design and operation of rock support systems, Mining Technology., 123, (2), 59–68.10.1179/1743286313Y.0000000054
- Dorion, J. F., Hadjigeorgiou, J., & Ghali, E. 2009. Quantifying the rate of corrosion in selected underground mines. In D. D. G. Grasselli (Ed.), 3rd CANUS rock mechanics symposium, Toronto. pp. 477–488.
- Elias, E., Vandermaat, D., Craig, P., Chen, H., Crosky, A. G., Saydam, S., Hagan, P., and Hebblewhite, B. 2013a. Environmental characterisation of the stress-corrosion cracking of rockbolts in underground coal mines via laboratory and in situ testing. In Y. Potvin, B.Brady(Eds.), Rock mechanics for resources, energy, and environment, London, EUROCK. CRC Press/Balkema, 261–266.
- Elias, E., Vandermaat, D., Craig, P., Chen, H., Crosky, A. G., Saydam, S., Hagan, P. C. and Hebblewhite, B., 2013b. Metallurgical examination of rockbolts failed in service due to stress corrosion cracking. In 7th International symposium on ground support in mining and underground construction, Perth, Australian Centre for Geomechanics, 473–484.
- Fang, B. 2003. Review of stress corrosion cracking of pipeline steels in ‘low’ and ‘high’ ph solutions, Journal of Materials Science, 38, 127–132.10.1023/A:1021126202539
- Gamboa, E. and Atrens, A. 2002. Analysis of a rock bolt failed in service, Vol. 15, Madrid, National Centre for Metallurgical Research, 1–9.
- Gamboa, E. and Atrens, A. 2003. Laboratory testing of rock bolt stress corrosion cracking. In Coal operators conference, Vol. 14, Wollongong, AusIMM, 132–153.
- Gray, P. 1998. Stress corrosion cracking of rockbolts. In Coal operators conference, Wollongong, AusIMM, 206–212.
- Jones, R. and Ricker, R. 1999. Stress corrosion cracking: material performance and evaluation, ASM International, Ohio book section Mechanisms of stress corrosion cracking, Materials Park, USA, 1–40.
- Kang, H., Wu, Y., Gao, F., Lin, J. and Jian, P. 2013. Fracture characteristics in rock bolts in underground coal mine roadways, International Journal of Rock Mechanics and Mining Sciences, 62, 105–112.10.1016/j.ijrmms.2013.04.006
- Liu, Z. Y., Li, X. G., Cheng, Y. F. 2012. Mechanistic aspect of near-neutral ph stress corrosion cracking of pipelines under cathodic polarization, Mining Sciences 55, 54–60. http://www.sciencedirect.com/science/article/pii/S0010938X11005300
- Mafredi, C. and Otegui, J. 2002. Failure of SCC in buried pipelines, Engineering Failure Analysis, 9, (5), 495–509.10.1016/S1350-6307(01)00032-2
- Parrot, R. 1997. An investigation into the effects of corrosion on the mechanical properties of at strata bolts, Report CN96/110/HSE, Independent Metallurgical Practice.
- Spearing, A., Mondal, K., Bylapudi, G. and Hirschi, J. 2010. The corrosion of rock anchors in U.S. coal mines. In SME Annual Meeting. Phoenix, USA.
- Thulukkanam, K. 2013. Heat exchanger design handbook (2nd ed.), Boca Raton, CRC Press.10.1201/CRCDEKMECENG
- Tsai, W. T., Chang, C. S. and Lee, J. T. 1994. Effects of shot peening on corrosion and stress corrosion cracking behaviors of sensitized alloy 600 in thiosulfate solution, Corrosion Science, 50, (2), 98–105.10.5006/1.3293507
- Vandermaat, D. 2015. Stress corrosion cracking of rockbolts: a laboratory based approach utilising a controlled mine environment. Ph.D. thesis, UNSW Australia. Sydney, Australia.
- Vandermaat, D., Elias, E., Craig, P., Saydam, S., Cosky, A., Hagan, P. C. and Hebblewhite, B. 2012. Experimental protocol for stress corrosion cracking of rockbolts. In N. Aziz and B. Kinnimoth (Eds.), Coal operators conference, Vol. 12, Wollongong, AusIMM, 129–136.
- Vandermaat, D., Elias, E., Tang, Z., Craig, P., Saydam, S., Crosky, A., Hagan, P. C. and Hebblewhite, B. 2012. Coupon testing for field assessment of stress corrosion cracking of rock bolts. In T. Barczack and S. Tadolini (Eds.), 31st International conference on ground control in mining, Morgantown, USA, 157–165.
- Villaescusa, E., Hassell, R. and Thompson, A. G. 2008. Development of a corrosivity classification for cement grouted cable strand in underground hard-rock mining excavations, Journal of the Southern African Institute of Mining and Metallurgy, 108, (6), 301–308.
- Villalba, E. and Atrens, A. 2007. Metallurgical aspects of rocbolt stress corrosion cracking, Materials Science and Engineering, 491, 8–18.
- Wang, J. and Wang, Z. Y. 2010. Corrosion behaviour of weathering steel in diluted qinghai salt lake water in a laboratory accelerated test that involved cyclic wet/dray conditions. Materials Chemistry and Physics, 124, (2–3), 952–958.10.1016/j.matchemphys.2010.07.069