http://orcid.org/0000-0002-1575-2091
References
- Wagh PB, Begag R, Pajonk GM, et al. Comparison of some physical properties of silica aerogel monoliths synthesized by different precursors. Mater Chem Phys. 1999;57:214–218. doi: 10.1016/S0254-0584(98)00217-X
- Tadjarodi A, Haghverdi M, Mohammadi V. Preparation and characterization of nano-porous silica aerogel from rice husk ash by drying at atmospheric pressure. Mater Res Bull. 2012; 47:2584–2589. doi: 10.1016/j.materresbull.2012.04.143
- Soleimani Dorcheh A, Abbasi MH. Silica aerogel; synthesis, properties and characterization. J Mater Process Technol. 2008;199(1–3):10–26. DOI:10.1016/j.jmatprotec.2007.10.060.
- Iskandar F, Lenggoro IW, Xia B, et al. Functional nanostructured silica powders derived from colloidal suspensions by sol spraying. J Nanoparticle Res. 2001:263–270. doi: 10.1023/A:1017592817667
- Cao XQ, Vassen R, Schwartz S, et al. Spray-drying of ceramics for plasma-spray coating. J Eur Ceram Soc. 2000;20:6. doi: 10.1016/S0955-2219(00)00112-6
- Keller N, Bertrand G, Comas B, et al. On the tailoring of spray dried thermal spray powder. In: Berndt C., Khor K., Lugscheider E., editors. Thermal spray 2001: new surfaces for a new millenium ASM International; 2001. p. 285–290.
- Berge A, Johansson PÄR. Literature review of high performance thermal insulation. Chalmers University of Technology; 2012.
- Gurav JL, Jung I-K, Park H-H, et al. Silica aerogel: synthesis and applications. J Nanomater. 2010;2010:1–11. DOI:10.1155/2010/409310.
- Thirumalaikumarasamy D, Shanmugam K, Balasubramanian V. Progress in natural science: materials international influences of atmospheric plasma spraying parameters on the porosity level of alumina coating on AZ31B magnesium alloy using response surface methodology. Prog Nat Sci Mater Int. 2012;22(5):468–479. DOI:10.1016/j.pnsc.2012.09.004.
- Carpio P, Blochet Q, Pateyron B, et al. Correlation of thermal conductivity of suspension plasma sprayed yttria stabilized zirconia coatings with some microstructural effects. Mater Lett. 2013;107:370–373. DOI:10.1016/j.matlet.2013.06.051.
- Arai M, Ochiai H, Suidzu T. Surface & coatings technology a novel low-thermal-conductivity plasma-sprayed thermal barrier coating controlled by large pores. Surf Coat Technol. 2016;285:120–127. DOI:10.1016/j.surfcoat.2015.11.022.
- Tan Y, Longtin JP, Sampath S. Modeling thermal conductivity of thermal spray coatings: comparing predictions to experiments. J Therm Spray Technol. 2006;15(Dec):545–552. DOI:10.1361/105996306X147216.
- Kulkarni A, Wang Z, Nakamura T, et al. Comprehensive microstructural characterization and predictive property modeling of plasma-sprayed zirconia coatings. Acta Mater. 2003;51:2457–2475. DOI:10.1016/S1359-6454(03)00030-2.
- Wang Z, Kulkarni A, Deshpande S, et al. Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings. Acta Mater. 2003;51:5319–5334. DOI:10.1016/S1359-6454(03)00390-2.
- Ercan B, Bowman KJ, Trice RW, et al. Effect of initial powder morphology on thermal and mechanical properties of stand-alone plasma-sprayed 7 wt .% Y 2 O 3 – ZrO 2 coatings. Mater Sci Eng A. 2006;436:212–220. DOI:10.1016/j.msea.2006.07.085.
- Bertrand G, Bertrand P, Roy P, et al. Low conductivity plasma sprayed thermal barrier coating using hollow psz spheres: correlation between thermophysical properties and microstructure. Surf Coat Technol. 2008;202:1994–2001. DOI:10.1016/j.surfcoat.2007.08.042.