References
- Jones, Denny A. Materials selection and design. In: Principles and prevention of corrosion, 2nd ed. Prentice-Hall, 1996, p. 522–524
- Ghali E. Aluminum and aluminum alloys. Uhlig’s corrosion handbook. The Electrochem Soc. 2011: 727–729.
- Paglia CS, Buchheit RG. A look in the corrosion of aluminum alloy friction stir welds. Scr Mater. 2008;58(5):383–387. doi: 10.1016/j.scriptamat.2007.10.043
- Lumsden JB, Mahoney MW, Pollock G, et al. Intergranular corrosion following friction stir welding of aluminum alloy 7075-T651. Corrosion. 1999;55(12):1127–1135. doi: 10.5006/1.3283950
- Hatamleh O, Singh PM, Garmestani H. Corrosion susceptibility of peened friction stir welded 7075 aluminum alloy joints. Corros Sci. 2009;51(1):135–143. doi: 10.1016/j.corsci.2008.09.031
- Wang JT, Zhang YK, Chen JF, et al. Effects of laser shock peening on stress corrosion behavior of 7075 aluminum alloy laser welded joints. Mater Sci Eng: A. 2015;647:7–14. doi: 10.1016/j.msea.2015.08.084
- “PreKote Surface Pretreatment.” Pantheon Enterprises, 2014. http://pantheonchemical.com/wp-content/uploads/2016/11/PreKote_Technical-Data-Sheet.pdf
- Zhao J, Frankel G, McCreery RL. Corrosion protection of untreated Aa-2024-T3 in chloride solution by a chromate conversion coating monitored with Raman Spectroscopy. J Electrochem Soc. 1998;145(7):2258–2264. doi: 10.1149/1.1838630
- Jeffcoate CS, Isaacs HS, Aldykiewicz AJ, et al. Chromate in conversion coatings: a XANES study of its concentration and mobility. J Electrochem Soc. 2000;147(2):540–547. doi: 10.1149/1.1393229
- Kendig MW, Davenport AJ, Isaacs HS. The mechanism of corrosion inhibition by chromate conversion coatings from X-Ray absorption near edge spectroscopy (xanes). Corros Sci. 1993;34(1):41–49. doi: 10.1016/0010-938X(93)90257-H
- Edeleanu C, Evans UR. The Causes of the localized character of corrosion on aluminium. Trans Faraday Soc. 1951;47:1121–1135. doi: 10.1039/tf9514701121
- Matzdorf CA, Nickerson WD, Rincon Troconis BC, et al. Galvanic test panels for accelerated corrosion testing of coated Al alloys: Part 1—concept. Corrosion. 2013;69(12):1240–1246. doi: 10.5006/0905
- Feng Z, Frankel GS. Galvanic test panels for accelerated corrosion testing of coated Al alloys: Part 2—measurement of galvanic interaction. Corrosion. 2014;70(1):95–106. doi: 10.5006/0907
- Feng Z, Boerstler J, Frankel GS, et al. Effect of surface pretreatment on galvanic attack of coated Al alloy panels. Corrosion. 2015;71(6):771–783. doi: 10.5006/1643
- Military Standard (MIL)-PRF-23377 K. Performance specification primer coatings: epoxy, high-solids. Lakehurst (NJ): Naval Air Warfare Center, Air Division; 2012.
- ASTM B117-09. Standard practice for modified salt spray (Fog) testing. West Conshohocken (PA): Annual Book of ASTM Standards, ASTM International; 2009.
- Wang X, Frankel GS. Protection mechanism of Al-rich epoxy primer on aluminum alloy 2024-T3. Corrosion. 2017;73(10):1192–1195. doi: 10.5006/2526
- McCafferty E. Concentration polarization and diffusion. Introd Corros Sci. 2016: 177–188.