References
- Badrak R, Delacruz A, Howie W, et al. Characterization of direct metal laser sintered Alloy 718 in the as-fabricated and heat treated condition, Corrosion 2018, Paper no. 11297, NACE International, 2018.
- Cappuccini F, Donato A, Di Pietro D, et al. Exploring the corrosion behavior of alloy UNS N07718 manufactured by additive manufacturing under different building directions, Corrosion 2018, Paper no. 11171, NACE International, 2018.
- Riemer A, Leuders S, Thöne M, et al. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Eng Fract Mech. 2014;120:15–25.
- Turnbull A., Corrosion issues associated with additive manufacturing with stainless steel – Implications for testing, NPL Report MAT 86, 2017.
- Örnek C. Additive manufacturing – a general corrosion perspective. CEST. 2018;53:531–535.
- Sander G, Tan J, Bolan P, et al. Corrosion of additively manufactured alloys: A review. Corrosion. 2019;74:1318–1351.
- Obasi GC, Zhang Z, Sampath D, et al. Effect of microstructure and alloy chemistry on hydrogen embrittlement of precipitation-hardened Ni-based alloys. Metall Mater Trans A. 2018;49:1167–1181.
- NACE. MR0175/ISO 15156, Petroleum and gas industries - materials for use in H2S containing environments in oil and gas production, NACE International, 2015.
- NACE. TM0198, Slow strain rate test method for screening corrosion resistant alloys for stress corrosion cracking in sour oilfield service, NACE International, 2016.
- Trillo E, Duret-Thual C, Thierry D, et al. Assessment of the hydrogen induced stress cracking resistance of precipitation hardened nickel-based alloys using the slow strain rate tensile test method – Experimental parameters and related issues, Corrosion 2019, Paper no. 13455, NACE Int., Houston, 2019.
- Cao L, Thodla R, Li X. Hydrogen embrittlement of additively manufactured Inconel 718, Corrosion 2019, Paper no. 13453, NACE Int., Houston, 2019.
- Li X, Li Q, Wang T. Hydrogen assisted failure of laser melted additively manufactured IN 718 superalloy. Corros. Sci. 2019;160:108171.
- ASTM Standard ASTM . 370-12a, Standard test methods and definitions for mechanical testing of steel products, ASTM International, West Conshohocken, PA, 2009.
- Slowinski JA, Garboczi EJ, Hebenstreit KM. Porosity measurement and analysis for metal additively manufacturing process control. J Res Natl Stand Technol. 2014;119:494–528.