References
- Ghali E. Uhlig's Corros Handb. 2011. p. 715–745.
- Matzdorf C, Nickerson WC, Rincon Troconis BC. Galvanic test panels for accelerated corrosion testing of coated Al alloys: part 1—concept. Corrosion. 2013;69(12):1240–1246.
- Boerstler JT, Jokar M, Frankel G. Corrosion of coated aluminium alloy 7075-T6 galvanic test assemblies, part II: impact of fastener through-hole condition. Corros Eng, Sci Technol. 2020;55(5):411–424.
- Boerstler JT, Jokar M, Frankel G. Corrosion of coated aluminium alloy 7075-T6 galvanic test assemblies, part I: unscribed panels. Corros Eng, Sci Technol. 2020;55(3):268–280.
- Arendt HF. Impressed current cathodic protection. Mater Corros. 2005;56(4):271–277.
- Christodoulou C, et al. Assessing the long term benefits of impressed current cathodic protection. Corros Sci. 2010;52(8):2671–2679.
- Xu L, Su X, Cheng Y. Effect of alternating current on cathodic protection on pipelines. Corros Sci. 2013;66:263–268.
- Caré S, Raharinaivo A. Influence of impressed current on the initiation of damage in reinforced mortar due to corrosion of embedded steel. Cem Concr Res. 2007;37(12):1598–1612.
- El Maaddawy TA, Soudki KA. Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete. J Mater Civ Eng. 2003;15(1):41–47.
- Allahar KN, Bierwagen GP, Gelling VJ. Understanding AC–DC–AC accelerated test results. Corros Sci. 2010;52(4):1106–1114.
- Song F, Sridhar N. Modeling pipeline crevice corrosion under a disbonded coating with or without cathodic protection under transient and steady state conditions. Corros Sci. 2008;50(1):70–83.
- Song F, Sridhar N. Modeling pipeline corrosion under a disbonded coating under the influence of underneath flow. Corrosion. 2008;64(1):40–50.
- Bethencourt M, et al. Lifetime prediction of waterborne acrylic paints with the AC–DC–AC method. Prog Org Coat. 2004;49(3):275–281.
- Da Silva Lopes T, et al. Accelerated aging of anticorrosive coatings: two-stage approach to the AC/DC/AC electrochemical method. Prog Org Coat. 2020;138:105365.
- Zadeh MA, van der Zwaag S, García SJ. Assessment of healed scratches in intrinsic healing coatings by AC/DC/AC accelerated electrochemical procedure. Surf Coat Technol. 2016;303:396–405.
- Feng Z, et al. Effect of surface pretreatment on galvanic attack of coated Al alloy panels. Corrosion. 2015;71(6):771–783.
- Feng Z, Frankel G, Matzdorf C. Quantification of accelerated corrosion testing of coated AA7075-T6. J Electrochem Soc. 2013;161(1):C42.
- Howard R, Lyon S, Scantlebury J. Accelerated tests for the prediction of cut-edge corrosion of coil-coated architectural cladding: part I: cyclic cabinet salt spray. Prog Org Coat. 1999;37(1–2):91–98.
- Feng Z. Galvanic corrosion of coated Al alloy panels with more noble fasteners. The Ohio State University, Columbus: Ohio; 2015.
- Feng Z, Frankel G. Galvanic test panels for accelerated corrosion testing of coated Al alloys: part 2—measurement of galvanic interaction. Corrosion. 2014;70(1):95–106.
- Marcus P. Corrosion mechanisms in theory and practice. New York, NY: CRC Press; 2011.