References
- Wen S, Liu X, Ding J, et al. Hydrothermal synthesis of hydroxyapatite coating on the surface of medical magnesium alloy and its corrosion resistance. Prog Nat Sci: Mater Int. 2021;31:324–333.
- Yang Y, Xiong X, Chen J, et al. Research advances in magnesium and magnesium alloys worldwide in 2020. J Mag Alloys. 2021;9(3):705–747.
- Pea E, Calvo B, Martinez M, et al. A three-dimensional finite element analysis of the combined behavior of ligaments and menisci in the healthy human knee joint. J Biomech. 2006;39(9):1686–1701.
- Taylor S, Wallker PS. Stresses and moments telemetered from two distal femoral replacements during various activitie. J Biomech. 2001;34(7):839–848.
- Choudhary L, Raman R, Hofstetter J, et al. In-vitro characterization of stress corrosion cracking of aluminium-free magnesium alloys for temporary bio-implant applications. Mater Sci Eng C. 2014;42:629–696.
- Raman RS, Jafari S, Harandi SE. Corrosion fatigue fracture of magnesium alloys in bioimplant applications: a review. Eng Fract Mech. 2015;137:97–108.
- Zhou LF, Liu ZY, Wu W, et al. Stress corrosion cracking behavior of ZK60 magnesium alloy under different conditions. Int J Hydrogen Energy. 2017;42:26162–26174.
- Jafari S, Singh Raman RK, Davies CHJ. Stress corrosion cracking of an extruded magnesium alloy (ZK21) in a simulated body fluid. Eng Fract Mech. 2018;201:47–55.
- Harandi SE, Banerjee PC, Singh Raman RK, et al. Influence of bovine serum albumin in Hanks’ solution on the corrosion and stress corrosion cracking of a magnesium alloy. Mater Sci Eng C. 2017;80:335–345.
- Ge MZ, Xiang JY, Yang L, et al. Effect of laser shock peening on the stress corrosion cracking of AZ31B magnesium alloy in a simulated body fluid. Surf Coat Technol. 2017;310:157–165.
- Wang J, Giridharan V, Shanov V, et al. Flow-induced corrosion behavior of absorbable magnesium-based stents. Acta Biomater. 2014;10(12):5213–5223.
- Zhou LF, Liu ZY, Wu W, et al. Stress corrosion cracking behavior of zk60 magnesium alloy under different conditions. Int J Hydrogen Energy. 2017;42(41):26162–26174.
- Liu J, Zhang W, Zhang H, et al. Effect of microarc oxidation time on electrochemical behaviors of coated bio-compatible magnesium alloy. Mater Today Proc. 2014;1(1):70–81.
- Srinivasan PB, Zettler R, Blawert C, et al. A study on the effect of plasma electrolytic oxidation on the stress corrosion cracking behaviour of a wrought az61 magnesium alloy and its friction stir weldment. Mater Charact. 2009;60(5):389–396.
- Srinivasan PB, Blawert C, Dietzel W. Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of am50 magnesium alloy. Mater Sci Eng A. 2008;494(1-2):401–406.
- Li GN, Zhu SM, Nie JF, et al. Investigating the stress corrosion cracking of a biodegradable Zn-0.8 wt% Li alloy in simulated body fluid. Bioact Mater. 2021;6(5):1468–1478.
- Guo JW, Sun SY, Wang YM, et al. Hydrothermal biomimetic modification of microarc oxidized magnesium alloy for enhanced corrosion resistance and deposition behaviors in SBF. Surf Coat Technol. 2015;269:183–190.
- Chen LX, Sheng YY, Zhou ZB, et al. Influence of a MAO + PLGA coating on biocorrosion and stress corrosion cracking behavior of a magnesium alloy in a physiological environment. Corros Sci. 2019;148:134–143.
- Bordbar Khiabani A, Yarmand B, et al. Enhanced corrosion resistance and in-vitro biodegradation of plasma electrolytic oxidation coatings prepared on AZ91 Mg alloy using ZnO nanoparticles-incorporated electrolyte. Surf Coat Technol. 2019;360:153–171.
- Gao J. The effect of the electrolyses plating quality on the stress-corrosion fracture of Kovar alloy. Mater Mech Eng. 2000;24(1):4.