Laser surface melting of 304L SS: increase in resistance to transpassive dissolution and pitting corrosion

References

• Gupta R, Sunil Kumar B, Sundar R, et al. Enhancement of intergranular corrosion resistance of type 304 stainless steel through laser shock peening. Corros Eng Sci Technol. 2017;52(3):220–225.
   Web of Science ®Google Scholar
• Van der Merwe J, Tharandt D. Corrosion resistance of laser cladded 304L stainless steel enriched with Ru in hydrochloric acid. Corros Eng Sci Technol. 2017;52(1):54–60.
   Web of Science ®Google Scholar
• Kumar A, Gumma S, Roychowdhury S, et al. Laser-assisted removal of weld heat tints from stainless steel surface. J Laser Appl. 2022;34:012003.
   Web of Science ®Google Scholar
• Khaled MM, Yilbas BS. Effect of surface modification of Ti–6Al–4 V by laser and duplex treatment on selective dissolution of aluminium. Corros Eng Sci Technol. 2006;41(4):304–309.
   Web of Science ®Google Scholar
• Cui CY, Cui XG, Zhang YK, et al. Microstructure and microhardness analysis of the hexagonal oxides formed on the surface of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting. Appl Surf Sci. 2010;256:6782–6786.
   Web of Science ®Google Scholar
• Yilbas BS, Khaled M, Karatas C. Laser remelting of alumina tile surfaces: corrosion testing in aqueous solution. Corros Eng Sci Technol. 2011;46(4):477–480.
   Web of Science ®Google Scholar
• Khare J, Kaul R, Ganesh P, et al. Laser beam shaping for microstructural control during laser surface melting. J Laser Appl. 2007;19:1–7.
   Web of Science ®Google Scholar
• Von Allmen M, Huber E, Blatter A, et al. Melt quenching at 10 exp 10 at K/s. Int J Rapid Solidification. 1984;1(1):15–25.
   Google Scholar
• Pacquentin W, Caron N, Oltra R. Effect of microstructure and chemical composition on localized corrosion resistance of a AISI 304L stainless steel after nanopulsed-laser surface melting. Appl Surf Sci. 2015;356:561–573.
   Web of Science ®Google Scholar
• Liu Z, Chong PH, Skeldon P, et al. Fundamental understanding of the corrosion performance of laser-melted metallic alloys. Surf Coat Technol. 2006;200:5514–5525.
   Web of Science ®Google Scholar
• Pacquentin W, Caron N, Oltra R. Nanosecond laser surface modification of AISI 304L stainless steel: influence the beam overlap on pitting corrosion resistance. Appl Surf Sci. 2014;288:34–39.
   Web of Science ®Google Scholar
• Raj B, Mudali UK. Materials development and corrosion problems in nuclear fuel reprocessing plants. Prog Nucl Energ. 2006;48:283–313.
   Web of Science ®Google Scholar
• Fontana MG. Corrosion engineering. 3rd ed. New Delhi: McGraw Hill Education (India) Pvt Ltd; 1986.
   Google Scholar
• Kain V, Shinde SS, Gadiyar HS. Mechanism of improved corrosion resistance of type 304L stainless steel, nitric acid grade, in nitric acid environments. Mater Eng Perf. 1994;3:699–705.
   Web of Science ®Google Scholar
• Fauvet P, Balbaud F, Robin R, et al. Corrosion mechanisms of austenitic stainless steels in nitric media used in reprocessing plants. J Nucl Mater. 2008;375:52–64.
   Web of Science ®Google Scholar
• Ningshen S, Mudali UK, Ramya S, et al. Corrosion behaviour of AISI type 304L stainless steel in nitric acid media containing oxidizing species. Corros Sci. 2011;53:64–70.
   Web of Science ®Google Scholar
• Bhise S, Kain V. Methodology based on potential measurement for predicting corrosion behaviour of SS 304L in boiling nitric acid containing oxidising ions. Corros Eng Sci Technol. 2012;47:61–69.
   Web of Science ®Google Scholar
• Sathe S, Kain V, Chandra K. Corrosion behavior of type 304L stainless steels in nitric acid containing free and complexed fluoride. Corrosion. 2012;68(2):026002-1–026002-14.
   Web of Science ®Google Scholar
• Khan S, Kain V, Reddy AVR. Corrosion in transpassive potential regime: effect of composition and microstructure of austenitic stainless steel. Corrosion. 2014;70(1):19–28.
   Web of Science ®Google Scholar
• Padhy N, Paul R, Mudali UK, et al. Morphological and compositional analysis of passive film on austenitic stainless steel in nitric acid medium. Appl Surf Sci. 2011;257:5088–5097.
   Web of Science ®Google Scholar
• Tcharkhtchi-Gillard E, Benoit M, Clavier P, et al. Kinetics of the oxidation of stainless steel in hot and concentrated nitric acid in the passive and transpassive domains. Corros Sci. 2016;107:182–192.
   Web of Science ®Google Scholar
• Gwinner B, Auroy M, Balbaud-Célérier F, et al. Towards a reliable determination of the intergranular corrosion rate of austenitic stainless steel in oxidizing media. Corros Sci. 2016;107:60–75.
   Web of Science ®Google Scholar
• Sharma P, Roy H. Pitting corrosion failure of an AISI stainless steel pointer rod. Eng Fail Anal. 2014;44:400–407.
   Web of Science ®Google Scholar
• Zhang XM, Chen ZY, Luo HF, et al. Corrosion resistances of metallic materials in environments containing chloride ions: a review. Trans Nonferrous Met Soc China. 2022;32:377–410.
   Web of Science ®Google Scholar
• Zhang B, Wang J, Wu B, et al. Unmasking chloride attack on the passive film of metals. Nat Commun. 2018;9:2559.
   PubMed Web of Science ®Google Scholar
• Kain V, Palit GC, Chouthai SS, et al. Effect of heat treatment on the critical pitting potential of SS 304 in 0.01 N NaCl. J Electrochem Soc India. 1989;38(12):50–54.
   Google Scholar
• Chong PH, Liu Z, Wang XY, et al. Pitting corrosion behaviour of large area laser surface treated 304L stainless–steel. Thin Solid Films. 2004;453-454:388–393.
   Web of Science ®Google Scholar
• Carboni C, Peyre P, Beranger G, et al. Influence of high power diode laser surface melting on the pitting corrosion resistance of type 316L stainless steel. J Mater Sci. 2002;37:3715–3723.
   Web of Science ®Google Scholar
• Kwok CT, Lo KH, Chan WK, et al. Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels. Corros Sci. 2011;53:1581–1591.
   Web of Science ®Google Scholar
• Chan WK, Kwok CT, Lo KH. Laser surface melting (LSM) of stainless steels for mitigating intergranular corrosion (IGC). Cambridge: University of Macau, China. Woodhead Publishing Limited; 2012. 79–107.
   Google Scholar
• Cui CY, Cui XG, Zhang YK, et al. Microstructure and corrosion behaviour of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting. Surf Coat Technol. 2011;206:1146–1154.
   Web of Science ®Google Scholar
• Chan WK, Kwok CT, Lo KH. Effect of laser surface melting and subsequent re-aging on microstructure and corrosion behaviour of aged S32950 duplex stainless steel. Mater Chem Phys. 2018;207:451–464.
   Web of Science ®Google Scholar
• Yue TM, Chan CP, Yan LJ, et al. Effect of excimer laser surface melting on intergranular corrosion cracking of the aluminum–lithium alloy 8090. J Laser Appl. 2004;16(1):31–39.
   Web of Science ®Google Scholar
• Ganesh P, Giri R, Kaul R, et al. Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel. Mater. Des. 2012;39:509–521.
   Web of Science ®Google Scholar
• Hwa Y, Kumai CS, Yang N, et al. Effect of microstructural bands on the localized corrosion of laser surface-melted 316L stainless steel. Corrosion. 2021;77(9):1014–1024.
   Web of Science ®Google Scholar
• ASTM International. A262-15, standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels. West Conshohocken (PA): ASTM International; 2015.
   Google Scholar
• Conde A, Garcia I, De Damborenea JJ. Pitting corrosion of 304 stainless steel after laser surface melting in argon and nitrogen atmosphere. Corros Sci. 2001;43:817–828.
   Web of Science ®Google Scholar
• Kang YB, Kim HS, Zhang J, et al. Practical application of thermodynamics to inclusions engineering in steel. J Phys Chem Solids. 2015;66:219–225.
   Google Scholar
• Suzuki M, Yamaguchi R, Murakami K, et al. Inclusion particle growth during solidification of stainless steel. ISIJ Int. 2001;41:247–256.
   Web of Science ®Google Scholar
• Chao Q, Cruz V, Thomas S, et al. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel. Scr Mater. 2017;141:94–98.
   Web of Science ®Google Scholar
• Chandra K, Kain V, Ganesh P. Controlling end-grain corrosion of austenitic stainless steels. J Mater Eng Perform. 2008;17(1):115–122.
   Web of Science ®Google Scholar
• Kolotyrkin YM, Kasparova OV, Bogolyubski SD. Role of segregation of impurities at grain boundaries in the intergranular corrosion of stainless steels. Proceedings of the international congress on metallic corrosion, Canada, 1984. p. 130–138.
   Google Scholar
• Hosoi K, Okosuka TY, Honda T, et al. Corrosion resistance of Type 304L stainless steel in nitric acid solution and impurities of grain boundary segregation of phosphorus. Proceedings of the RECORD 91, Japan, 1991. p. 1060–1070.
   Google Scholar
• Sakuraya K, Kimura T, Iwasaki S. Influence of phosphorus, sulphur, and oxygen on 65% nitric acid corrosion resistance of super high-clean 316L stainless steel. ISIJ Int. 2006;46(4):567–572.
   Web of Science ®Google Scholar
• Ioka I, Suzuki J, Motoka T, et al. Correlation between intergranular corrosion and impurities of extra high purity austenitic stainless steels. J Pow Energ Syst. 2010;4(1):105–112.
   Google Scholar
• Mayuzumi M, Ohta J, Kako K, et al. Effect of various impurities on the transpassive corrosion of high-purity Fe-18%Cr14%Ni alloys. Corrosion. 2001;57(10):889–897.
   Web of Science ®Google Scholar
• Stewart J, Williams DE. The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions. Corros Sci. 1992;33(3):457–474.
   Web of Science ®Google Scholar
• Stansbury EE, Buchanan RA. Fundamentals of electrochemical corrosion. materials park. Ohio: Asm Intl. 2000: 288–290.
   Google Scholar
• Webb EG, Alkire RC. Pit initiation at single sulfide inclusions in stainless steel: I. electrochemical microcell measurement. J Electrochem Soc. 2002;149(6):B272–B279.
   Web of Science ®Google Scholar
• Ryan MP, Williams DE, Chater RJ, et al. Why stainless steel corrodes. Nature. 2002;415:770–774.
   PubMed Web of Science ®Google Scholar
• Williams DE, Kilburn MR, Cliff J, et al. Composition changes around sulphide inclusions in stainless steels and implications for the initiation of pitting corrosion. Corros Sci. 2010;52:3702–3716.
   Web of Science ®Google Scholar
• Suter T, Bohni H. Microelectrodes for corrosion studies in microsystems. Electrochim Acta. 2001;47:191–199.
   Web of Science ®Google Scholar
• Akgun OV, Urgen M, Cakir AF. The effect of heat treatment on corrosion behaviour of laser melted 304L stainless steel. Mater Sci Eng A. 1995;203:324–331.
   Web of Science ®Google Scholar
• Kwok CT, Man HC, Cheng FT. Cavitation erosion and pitting corrosion of laser surface melted stainless steels. Surf Coat Technol. 1998;99:295–304.
   Web of Science ®Google Scholar