References
- P. Elsen and H.P. Hougardy, Steel Res. 64 (1993) p.431.
- D.V. Wilson and B. Russell, Acta Metall. 8 (1960) p.36.10.1016/0001-6160(60)90138-3
- A.H. Cottrell, Report of a Conference on Strength of Solids, Physical Society, London, 1948, p.30.
- A.H. Cottrell and B.A. Bilby, Proceedings of Physical Society, London, 62A (1949) p.49.
- S. Harper, Phys. Rev. 83 (1951) p.709.10.1103/PhysRev.83.709
- R. Bullough and R.C. Newman, Proc. Royal Soc. A 249 (1959) p.427.10.1098/rspa.1959.0034
- T. Mura, E.A. Lautenschlager and J.O. Brittain, Acta Metall. 9 (1961) p.453.10.1016/0001-6160(61)90140-7
- R.E. Reed-Hill, S.C. Park and L.P. Beckerman, Acta Metall. 31 (1983) p.1715.10.1016/0001-6160(83)90170-0
- S. Berbenni, V. Favier, X. Lemoine and M. Berveiller, Scr. Mater. 51 (2004) p.303.10.1016/j.scriptamat.2004.04.031
- J.Z. Zhao, A.K. De and B.C. Cooman, ISIJ Int. 40 (2000) p.725.10.2355/isijinternational.40.725
- B. Soenen, A.K. De, S. Vandeputte and B.C. De Cooman, Acta Mater. 52 (2004) p.3482.
- S. Das, S.B. Singh, O.N. Mohanty and H.K.D.H. Bhadeshia, Mater. Sci. Technol. 24 (2008) p.107.10.1179/174367507X247511
- S. Das, S.B. Singh and O.N. Mohanty, Ironmaking Steelmaking 38 (2011) p.139.10.1179/030192310X12816231892503
- V. Ballarin, M. Soler, A. Perlade, X. Lemoine and S. Forest, Metall. Mater. Trans. A 40A (2009) p.1376.
- S. Das, Ph.D. Thesis, IIT Kharagpur, 2012. Available at http://www.msm.cam.ac.uk/phase-trans/2012/Combined_SD.pdf
- L.J. Baker, J.D. Parker and S.R. Daniel, Mater. Sci. Technol. 18 (2002) p.541.10.1179/026708302225001741
- A.K. De, S. Vandeputte and B.C. De Cooman, Scr. Mater. 41 (1999) p.831.10.1016/S1359-6462(99)00232-8
- K. Dehghani and J.J. Jonas, Metall. Mater. Trans. A 31 (2000) p.1375.10.1007/s11661-000-0256-2
- W. Al-Shalfan, Ph.D. Thesis, Colorado School of Mines, Golden, CO, 2001.
- A.K. De, S. Vandeputte and B.C. De Cooman, Scr. Mater. 44 (2001) p.695.10.1016/S1359-6462(00)00638-2
- A.H. Cottrell, Dislocations and Plastic Flow in Crystals, Oxford University Press, London EC4, 1965.
- U.F. Kocks, A Statistical Theory of Alloy Hardening, in Physics of Strength and Plasticity, Ali S. Argon, ed., The MIT Press, Cambridge, MA, (1969) p.143.
- N.F. Mott and F.R. Nabarro, Dislocation theory of transient creep, in Physical Society Bristol Conference Report (1948) p.1.
- H. Conrad, J. Met. 16 (1964) p.582.
- S. Hartley, Acta Metall. 14 (1966) p.1237.10.1016/0001-6160(66)90241-0
- A.S. Krausz and K. Krausz, The Constitutive Law of Deformation Kinetics, in Unified Constitutive Laws of Plastic Deformation, A.S. Krausz and K. Krausz, eds., Academic Press, London, 1996 p.229.
- R.W.K. Honeycombe, The Plastic Deformation of Metals 2nd ed., Edward Arnold, London, 1984, p. 293.
- T. Gladman, The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997.
- T. Gladman, Mater. Sci. Technol. 15 (1999) p.30.10.1179/026708399773002782
- W.C. Leslie, The Physical Metallurgy of Steels, McGraw-Hill International Book Company, New York, 1981.
- C.A. Wert, Phys. Rev. 79 (1950) p.601.10.1103/PhysRev.79.601
- C. Zener, J. Appl. Phys. 20 (1949) p.950.10.1063/1.1698258
- Thermo-Calc Software, Stockholm.
- A. Van Snick, K. Lips, S. Vandeputte, B.C. De Cooman and J. Dilewijns, Proceedings of Conference on Modern LC and ULC Sheet Steels for Cold Forming: Processing and Properties, W. Bleck, ed., Institute of Ferrous Metallurgy, Aachen, 1998, p.413.
- J.M. Rubianes and P. Zimmer, Rev. Metall. Cah. Int. Tech. 93 (1996) p.99.
- S. Hanai, N. Takemoto, Y. Tokunaga and Y. Mizuyama, Trans. ISIJ 24 (1984) p.17.10.2355/isijinternational1966.24.17
- V. Massardier, N. Lavaire, M. Soler and J. Merlin, Scr. Mater. 50 (2004) p.1435.10.1016/j.scriptamat.2004.03.010
- A.K. De, K.D. De Blauwe, S. Vandeputte and B.C. De Cooman, J. Alloys Compd. 310 (2000) p.405.10.1016/S0925-8388(00)00973-7