References
- F.R.N. Nabarro, Strength of Solids, The Physical Society, London, 1948.
- M. Ashby and R. Verrall, Acta Metall. 21 (1973) p.149.10.1016/0001-6160(73)90057-6
- C. Herring, Appl. Phys. 21 (1950) p.437.10.1063/1.1699681
- R. Coble, J. Appl. Phys. 34 (1963) p.1679.10.1063/1.1702656
- H. Green, J. Appl. Phys. 41 (1970) p.3899.10.1063/1.1659525
- R. Raj and M. Ashby, Metall. Trans. 2 (1971) p.1113.10.1007/BF02664244
- J. Spingarn and W. Nix, Acta Metall. 26 (1978) p.1389.10.1016/0001-6160(78)90154-2
- J. Schneibel, R. Coble and R. Cannon, Acta Metall. 29 (1981) p.1285.10.1016/0001-6160(81)90019-5
- B.-N. Kim, K. Morita and K. Hiraga, Mater. Sci. Eng. A 363 (2003) p.67.10.1016/S0921-5093(03)00576-8
- Z. Zhong and S. Meguid, J. Elast. 46 (1997) p.91.10.1023/A:1007342605107
- M. Lagos, Phys. Rev. B 71 (2005) p.224117.10.1103/PhysRevB.71.224117
- M. Lagos and H.C. Duque, Int. J. Plast. 17 (2001) p.369.10.1016/S0749-6419(00)00041-3
- H.J. Frost and M.F. Ashby, Deformation Mechanism Maps, Pergamon Press, Oxford, 1982.
- K.A. Padmanabhan, R.A. Vasin and F.U. Enikeev, Superplastic Flow: Phenomenology and Mechanics, Springer, Berlin, 2001.10.1007/978-3-662-04367-7
- T. Langdon, Acta Metall. Mater. 42 (1994) p.2437.10.1016/0956-7151(94)90322-0
- T.G. Langdon, J. Mater. Sci. 41 (2006) p.597.10.1007/s10853-006-6476-0
- R. Panicker, A. Chokshi, R. Mishra, R. Verma and P. Krajewski, Acta Mater. 57 (2009) p.3683.10.1016/j.actamat.2009.04.011
- H. Askari, J. Young, D. Field, G. Kridli, D. Li and H. Zbib, Philos. Mag. (2013) p.1.
- D. Li, H. Zbib, X. Sun and M. Khaleel, Int. J. Plast. 52 (2014) p.3.
- R. Lebensohn and C. Tomé, Acta Metall. Mater. 41 (1993) p.2611.10.1016/0956-7151(93)90130-K
- T. Ohashi, M. Kawamukai and H. Zbib, Int. J. Plast. 23 (2007) p.897.10.1016/j.ijplas.2006.10.002
- S. Agnew, C. Tomé, D. Brown, T. Holden and S. Vogel, Scr. Mater. 48 (2003) p.1003.10.1016/S1359-6462(02)00591-2
- A.S. Khan, A. Pandey, T. Gnäupel-Herold and R.K. Mishra, Int. J. Plast. 27 (2011) p.688.10.1016/j.ijplas.2010.08.009
- H.M. Zbib, Acta Mech. 96 (1993) p.119.10.1007/BF01340705
- O. Al Hattamleh, B. Muhunthan and H. Zbib, Int. J. Numer. Anal. Methods Geomech. 29 (2005) p.713.10.1002/(ISSN)1096-9853
- D. Moldovan, D. Wolf and S. Phillpot, Acta Mater. 49 (2001) p.3521.10.1016/S1359-6454(01)00240-3
- J.D. Eshelby, Proc. R. Soc. London, Ser. A 241 (1957) p.376.10.1098/rspa.1957.0133
- H. Wang, B. Raeisinia, P. Wu, S. Agnew and C. Tomé, Int. J. Solids Struct. 47 (2010) p.2905.10.1016/j.ijsolstr.2010.06.016
- H. Wang, Y. Wu, P. Wu and K. Neale, Comput. Mater. Continua 19 (2010) p.255.
- H. Wang, P. Wu and M. Gharghouri, Mat. Sci. Eng. A 527 (2010) p.3588.10.1016/j.msea.2010.02.050
- P. Comley, J. Mater. Eng. Perform. 17 (2008) p.183.10.1007/s11665-007-9181-5
- A. Rodriguez, G. Kridli, G. Ayoub and H. Zbib, J. Mater. Eng. Perform. 22 (2013) p.3115.10.1007/s11665-013-0598-8
- Y.H. Wei, Q.D. Wang, Y.P. Zhu, H.T. Zhou, W.J. Ding, Y. Chino and M. Mabuchi, Mat. Sci. Eng. A 360 (2003) p.107.10.1016/S0921-5093(03)00407-6
- H. Conrad and W.D. Robertson, Trans. AIME 209 (1957) p.503.
- B.C. Wonsiewicz and W.A. Backofen, Trans. Metall. Soc. AIME 239 (1967) p.1422.
- P.G. Partridge, Metall. Rev. 12 (1967) p.169.
- I. Dragomir, D. Li, G. Castello-Branco, H. Garmestani, R. Snyder, G. Ribarik and T. Ungar, Mater. Charact. 55 (2005) p.66.10.1016/j.matchar.2005.03.002
- D. Field, L. Bradford, M. Nowell and T. Lillo, Acta Mater. 55 (2007) p.4233.10.1016/j.actamat.2007.03.021
- S. Fatemi-Varzaneh, A. Zarei-Hanzaki and H. Beladi, Mat. Sci. Eng. A 456 (2007) p.52.10.1016/j.msea.2006.11.095
- J.A. Delvalle, M.T. Pérez-Prado, J.R. Bartolomé, F. Penalba and O.A. Ruano, Mater. Trans. 44 (2003) p.2625.