References
- P.J. Rae, H.T. Goldrein, S.J.P. Palmer, J.E. Field and A.L. Lewis, Proc. Roy. Soc. London A 458 (2002) p.743.
- W.L. Elban, J. Mater. Sci. 14 (1979) p.1008.
- E.C. Martin and R.Y. Yee, Effects of surface interactions and mechanical properties of PBXs on explosive sensitivity. Report NWC TP 6560. Naval Weapons Center, 1984.
- J.D. Yeager, A.M. Dattelbaum, E.B. Orler, D.F. Bahr and D.M. Dattelbaum, J. Colloid Interface Sci. 352 (2010) p.535.
- S.J.P. Palmer, D.M. Williamson and W.G. Proud, AIP Conf. Proc. 845 (2006) p.917.
- H. Tan, C. Liu, Y. Huang and P.H. Geubelle, J. Mech. Phys. Solids 53 (2005) p.1892.
- C.B. Skidmore, D.S. Phillips, P.M. Howe, J.T. Mang and J.A. Romero, Evolution of microstructural changes in pressed HMX explosives, in Eleventh International Detonation Symposium, Snowmass, CO, 1998, pp. 556–564.
- C. Liu, M.L. Lovato, D.J. Alexander, K.D. Clarke, N.A. Mara, W.M. Mook, M.B. Prime and D.W. Brown, Experimental investigation of bonding strength and residual stresses in LEU fuel plates, in Proceedings of RERTR 2012-34th International Meeting on Reduced Enrichment for Research and Test Reactors, October 14-17, Warsaw, Poland, 2012.
- C. Liu, M.L. Lovato, K.D. Clarke, D.J. Alexander and W.R. Blumenthal, Miniature bulge test and energy release rate of HIPed aluminum/aluminum interfacial fracture, Los Alamos National Laboratory Report, LA-UR-14-23610. Submitted to J. Mech. Phys. Solids, 2014.
- H. Dannenberg, J. Appl. Poly. Sci. 5 (1961) p.125.
- M.L. Williams, J. Appl. Poly. Sci. 13 (1969) p.29.
- S.J. Bennett, K.L. DeVries and M.L. Williams, Int. J. Fracture 10 (1974) p.33.
- B.M. Malyshev and R.L. Salganik, Int. J. Fracture Mech. 1 (1965) p.114.
- J.A. Hinkley, J. Adhesion 16 (1983) p.115.
- K.M. Liechti and Y.-S. Chai, J. Appl. Mech. 59 (1992) p.295.
- H.M. Jensen, Eng. Fracture Mech. 40 (1991) p.475.
- H.M. Jensen, Int. J. Fracture 94 (1998) p.79.
- Z. Suo and J.W. Hutchinson, Int. J. Fracture 43 (1990) p.1.
- M.A. Sutton, S.R. McNeill, J.D. Helm and Y.J. Chao, Topics: Appl. Phys. 77 (2000) p.323.
- Y.-Q. Wang, M.A. Sutton, X.-D. Ke, H.W. Schreier, P.L. Reu and T.J. Miller, Exp. Mech. 51 (2011) p.405.
- X.-D. Ke, H.W. Schreier, M.A. Sutton and Y.-Q. Wang, Exp. Mech. 51 (2011) p.423.
- P.L. Reu, Exp. Mech. 51 (2011) p.443.
- A. Sofla, E. Seker, J.P. Landers and M.R. Begley, J. Appl. Mech. 77 (2010) p.031007.
- S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York, 1968.
- R.D. Mindlin, J. Appl. Mech. 18 (1951) p.31.
- E. Reissner, J. Appl. Mech. Trans. ASME 67 (1945) p. A-69.
- E. Reissner, Quar. Appl. Math. 5 (1947) p.55.
- R.D. Mindlin and H. Deresiewicz, J. Appl. Phys. 25 (1954) p.1329.
- H. Deresiewicz and R.D. Mindlin, J. Appl. Mech. 22 (1955) p.86.
- A.E.H. Love, A Treatise on the Mathematical Theory of Elasticity, 4th ed., Cambridge University Press, Cambridge, 1927.
- N.G. Stephen, J. Sound Vib. 202 (1997) p.539.
- A.J. Hull, J. Sound Vib. 294 (2006) p.125.
- I.D. Johnston, D.K. McCluskey, C.K.L. Tan and M.C. Tracey, J. Micromech. Microeng. 24 (2014) p.035017.
- A.A. Volinsky, N.R. Moody and W.W. Gerberich, Acta mater. 50 (2002) p.441.
- M.D. Kriese and W.W. Gerberich, J. Mater. Res. 14 (1999) p.3019.
- M. Damayanti, J. Widodo, T. Sritharan, S.G. Mhaisalkar, W. Lu, Z.H. Gan, K.Y. Zeng and L.C. Hsia, Mater. Sci. Eng. B 121 (2005) p.193.
- R.J. Hohlfelder, H. Luo, J.J. Vlassak, C.E.D. Chidsey and W.D. Nix, MRS Symp. Proc. 436 (1997) p.115.
- D.M. Williamson, S.J.P. Palmer, W.G. Proud and R. Govier, AIP Conf. Proc. 1195 (2009) p.478.