References
- P. Kanouté, D. Boso, J. Chaboche and B. Schrefler, Arch. Comput. Methods Eng. 16 (2009) p.31. doi:10.1007/s11831-008-9028-8
- M. Geers, V. Kouznetsova and W. Brekelmans, J. Comput. Appl. Math. 234 (2010) p.2175.
- J.D. Eshelby, Proc. R. Soc. London. Ser. A Math. Phys. Sci. 241 (1957) p.376.
- T. Mori and K. Tanaka, Acta Metall. 21 (1973) p.571. cited by (since 1996) 1814.
- Y. Benveniste, Mech. Mater. 6 (1987) p.147.
- E. Kröner, Zeitschrift f\"ur Physik A Hadrons Nucl. 151 (1958) p.504. doi:10.1007/BF01337948
- R. Hill, J. Mech. Phys. Solids 13 (1965) p.213.
- D.R.S. Talbot and J.R. Willis, IMA J. Appl. Math. 35 (1985) p.39.
- D.R.S. Talbot and J.R. Willis, IMA J. Appl. Math. 39 (1987) p.215.
- P. Ponte Castañeda, J. Mech. Phys. Solids 39 (1991) p.45.
- P. Ponte Castañeda, SIAM J. Appl. Math. 52 (1992) p.1321.
- D. Talbot and J. Willis, Int. J. Solids Struct. 29 (1992) p.1981.
- A. Molinari, F. El Houdaigui and L. Tóth, Int. J. Plast. 20 (2004) p.291.
- R. Hill, J. Mech. Phys. Solids 13 (1965) p.89.
- H.E. Pettermann, A.F. Plankensteiner, H.J. Böhm and F.G. Rammerstorfer, Comput. Struct. 71 (1999) p.197.
- I. Doghri and A. Ouaar, Int. J. Solids Struct. 40 (2003) p.1681.
- I. Doghri and L. Tinel, Int. J. Plast. 21 (2005) p.1919.
- O. Pierard and I. Doghri, Int. J. Multiscale Comput. Eng. 4 (2006) p.521.
- A. Molinari, G. Canova and S. Ahzi, Acta Metall. 35 (1987) p.2983.
- R. Masson, M. Bornert, P. Suquet and A. Zaoui, J. Mech. Phys. Solids 48 (2000) p.1203.
- A. Zaoui and R. Masson, Modelling stress-dependent transformation strains of heterogeneous materials, in IUTAM Symposium on Transformation Problems in Composite and Active Materials, Cairo, Egypt, 9-12 March 1997. Vol. 60, Solid Mechanics and its Applications, Y.A. Bahei and G.J. Dvorak, eds., Springer Netherlands, 2002, p.3.
- O. Pierard and I. Doghri, Int. J. Plast. 22 (2006) p.131.
- S. Mercier and A. Molinari, Int. J. Plast. 25 (2009) p.1024.
- I. Doghri, L. Adam and N. Bilger, Int. J. Plast. 26 (2010) p.219.
- J. Chaboche, P. Kanouté and A. Roos, Int. J. Plast. 21 (2005) p.1409.
- M. Berveiller and A. Zaoui, J. Mech. Phys. Solids 26 (1978) p.325.
- L. Wu, L. Noels, L. Adam and I. Doghri, Int. J. Plast. 51 (2013) p.80.
- L. Wu, L. Noels, L. Adam and I. Doghri, Comput. Methods Appl. Mech. Eng. 233--236 (2012) p.164.
- L. Wu, L. Noels, L. Adam and I. Doghri, Int. J. Solids Struct. 50 (2013) p.3843.
- J. Lemaitre and R. Desmorat, Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures, Springer-Verlag, Berlin, 2005.
- J. Lemaitre, Comput. Methods Appl. Mech. Eng. 51 (1985) p.31.
- R. Peerlings, R. de Borst, W. Brekelmans and S. Ayyapureddi, Int. J. Numer. Meth. Eng. 39 (1996) p.3391.
- M. Geers, Experimental analysis and computational modelling of damage and fracture, Ph.D. thesis, University of Technology, Eindhoven (Netherlands), 1997.
- R. Peerlings, R. de Borst, W. Brekelmans and M. Geers, Mech. Cohesive-Frictional Mat. 3 (1998) p.323.
- R. Peerlings, M. Geers, R. de Borst and W. Brekelmans, Int. J. Solids Struct. 38 (2001) p.7723.
- H. Moulinec and P. Suquet, Eur. J. Mech. -- A/Solids 22 (2003) p.751.
- P. Ponte Castañeda, J. Mech. Phys. Solids 44 (1996) p.827.
- P. Suquet, C.R. Sci. 320 (1995) p.563.
- P. Ponte Castañeda, J. Mech. Phys. Solids 50 (2002) p.737.
- P. Ponte Castañeda, J. Mech. Phys. Solids 50 (2002) p.759.
- I. Doghri, L. Brassart, L. Adam and J.S. Gérard, Int. J. Plast. 27 (2011) p.352.
- N. Lahellec and P. Suquet, J. Mech. Phys. Solids 55 (2007) p.1932.
- N. Lahellec and P. Suquet, J. Mech. Phys. Solids 55 (2007) p.1964.
- N. Lahellec, P. Ponte Castañeda, and P. Suquet, Proc. R. Soc. A: Math. Phys. Eng. Sci. 467 (2011) p.2224.
- L. Brassart, L. Stainier, I. Doghri and L. Delannay, J. Mech. Phys. Solids 59 (2011) p.2455.
- L. Brassart, L. Stainier, I. Doghri and L. Delannay, Int. J. Plast. 36 (2012) p.86.
- N. Lahellec and P. Suquet, Int. J. Plast. 42 (2013) p.1.
- M. Bobeth and G.G. Diener, J. Mech. Phys. Solids 35 (1987) p.137.
- V.A. Buryachenko, Appl. Mech. Rev. 54 (2001) p.1.
- L.Brassart, Homogenization of elasto-(visco)plastic composites: history-dependent incremental and variational approaches, Ph.D. thesis, The Universit catholique de Louvain, Louvain-la-Neuve, Belgium, 2011.
- I. Doghri and C. Friebel, Mech. Mater. 37 (2005) p.45.
- S. Jansson, Int. J. Solids Struct. 29 (1992) p.2181.
- L. Wu, F. Sket, J.M. Molina-Aldareguia, A. Makradi, L. Adam, I. Doghri and L. Noels, Compos. Struct. 126 (2015) p.246.