371
Views
18
CrossRef citations to date
0
Altmetric
Part A: Materials Science

Deformation-induced dissolution of the intermetallics Ni3Ti and Ni3Al in austenitic steels at cryogenic temperatures

, , , , , , & show all
Pages 1724-1742 | Received 23 Sep 2015, Accepted 02 Mar 2016, Published online: 04 May 2016

References

  • Y. Estrin and A. Vinogradov, Extreme grain refinement by severe plastic deformation: A wealth of challenging science, Acta Mater. 61 (2013), pp. 782–817.10.1016/j.actamat.2012.10.038
  • A.I. Deryagin, V.A. Zavalishin, and V.V. Sagaradze, Cold working induced redistribution of alloying elements and magnetic properties variation of stable austenitic chromium-nickel steels. I. Experimental discovery of phenomenon, Phys. Met. Metall. 75 (1993), pp. 90–99.
  • M.V. Belous and V.T. Cherepin, Changes in the steel carbide phase under influence of cold plastic deformation, Phys. Met. Metall. 12 (1961), pp. 685–692.
  • J.T. McGrath and W.J. Bratina, Interaction of dislocations and precipitates in quench-aged iron-carbon alloys subjected to cyclic stressing, Acta Metall. 15 (1967), pp. 329–339.10.1016/0001-6160(67)90209-X
  • V.G. Gavrilyuk, Distribution of Carbon in Steel, Naukova Dumka, Kiev, 1987, p. 304.
  • V.V. Sagaradze, V.A. Shabashov, A.G. Mukoseev, N.L. Pecherkina, and I.V. Sagaradze, Dissolution of carbon-containing particles such as soot, cementite, and VC carbides in fcc Fe–Ni alloys upon severe cold deformation, Phys. Met. Metall. 91 (2001), pp. 88–96.
  • V.A. Shabashov, S.V. Borisov, A.E. Zamatovskii, N.F. Vil’danova, A.G. Mukoseev, A.V. Litvinov, and O.P. Shepatkovskii, Dissolution of the Fe4N nitride in the nitrided layer of iron upon cold deformation by shear under pressure, Phys. Met. Metall. 102 (2006), pp. 545–552.10.1134/S0031918X06110147
  • V.V. Sagaradze and V.A. Shabashov, Anomalous diffusion phase transformations in steels upon severe cold deformation, Phys. Met. Metall. 112 (2011), pp. 146–164.10.1134/S0031918X11020256
  • V.V. Sagaradze, K.A. Kozlov, N.V. Kataeva, A.V. Litvinov, and V.A. Shabashov, Comparative analysis of the kinetics of dissolution of oxides Y2O3 and Fe2O3 in the iron matrix upon mechanical alloying, Phys. Met. Metall. 113 (2012), pp. 372–381.10.1134/S0031918X12040126
  • N.D. Zentsova, V.V. Sagaradze, L.N. Romashev, E.I. Starchenko, and V.A. Shabashov, Rise in the Curie point of aging alloys in the process of plastic deformation, Phys. Met. Metall. 47 (1979), pp. 27–32.
  • V.V. Sagaradze, V.A. Shabashov, T.M. Lapina, N.L. Pecherkina, and V.P. Pilyugin, Low-temperature deformation-induced dissolution of Ni3Al(Ti, Si, Zr) intermetallic phases in FCC Fe-Ni alloys, Phys. Met. Metall. 78 (1994), pp. 49–61.
  • V.A. Shabashov, V.V. Sagaradze, S.V. Morozov, and G.A. Volkov, Moessbauer study of intermetallic dissolution in Fe–Ni–Ti austenite, Metallofizika (Met. Phys.) 12 (1990), pp. 107–114.
  • A.G. Mukoseev, V.A. Shabashov, V.V. Sagaradze, and I.V. Sagaradze, Dissolution of carbon in Ni-1at.% Fe upon strong cold deformation, Mater. Sci. Eng. A. 316 (2001) pp. 174–181.
  • P.C. Chen and P.G. Winchell, Martensite lattice changes during tempering, Metall. Trans. A 11 (1980), pp. 1333–1339.10.1007/BF02653487
  • H. Gleiter, Die formänderung von ausscheidungen durch diffusion im spannungsfeld von versetzungen, Acta Metall. 16 (1968), pp. 455–464.10.1016/0001-6160(68)90031-X
  • A.R. Kuznetsov and V.V. Sagaradze, On the possible mechanism of low-temperature strain-induced dissolution of intermetallic phases in FCC Fe–Ni–Ti alloys, Phys. Met. Metall. 93 (2002), pp. 404–407.
  • V.F. Mazanko, D.S. Gertzriken, V.P. Bevz, V.M. Mironov, and O.A. Mironova, Mass transfer under the shock compression in metal sys-defects tems with interlayer, Met. Phys. Adv. Technol. 32 (2010), pp. 1267–1275.
  • X. Quelennec, A. Menand, J.M. Le Breton, R. Pippan, and X. Sauvage, Homogeneous Cu–Fe supersaturated solid solutions prepared by severe plastic deformation, Philos. Mag. 90 (2010), pp. 1179–1195.10.1080/14786430903313682
  • X. Sauvage and R. Pippan, Nanoscaled structure of a Cu–Fe composite processed by high-pressure torsion, Mater. Sci. Eng. A 410–411 (2005), pp. 345–347.10.1016/j.msea.2005.08.122
  • J.S. Benjamin, Mechanical Alloying, Sci. Am. 234 (1976), pp. 40–49.10.1038/scientificamerican0576-40
  • C. Suryanarayana, Mechanical alloying and milling, Prog. Mater. Sci. 46 (2001), pp. 1–184.10.1016/S0079-6425(99)00010-9
  • M.S El-Eskandarany, Mechanical Alloying for Fabrication of Advanced Engineering Materials, William Andrew Publishing, Norvich, NY, 2001, p. 242.
  • V.V. Sagaradze, V.I. Voronin, I.F. Berger, E.G. Volkova, and B.N. Goshchitskii, Evolution of the microstructure and microdistortions in the austenitic Cr–Ni–Ti steel during aging, Phys. Met. Metall. 112 (2011), pp. 517–525.10.1134/S0031918X11050279
  • V.A. Teplov, V.P. Pilyugin, R.I. Kuznetsov, D.I. Tupitsa, V.A. Shabashov, and V.M. Gundyrev, Phase BCC-FCC transition, caused by the deformation under pressure of the iron–nickel alloy, Phys. Met. Metall. 64 (1987), pp. 93–100.
  • Rusakov V.S., Mössbauer Spectroscopy of Locally Inhomogeneous Systems, Institute of Nuclear Physics of Kazakhstan National Radiation Centre Almaty, Almaty, 2000, p. 431.
  • A.Z. Menshikov and E.E. Yurchikov, Curie temperature of FCC iron–nickel alloys, Izvestiya AN SSSR, Ser. Phys. 36 (1972), pp. 1463–1466, [in Russian only].
  • R.M. Bozorth, Ferromagnetism, Van Nostrand (private publishing), New York, NY, 1951, p. 784.
  • YuZ Nosik, R.P. Ozerov, and K. Hening, Neutrons and Solid body, Atomizdat, Moscow, 1979, p. 344, [in Russian only]
  • D.Ya. Lyubov and V.A. Shmakov, The effect of drift on diffusion growth of a new phase in Nola elastic stresses of an edge dislocation, Izv. AN SSSR, Ser. Metals (Russian Metall.) 1 (1970) pp. 123–129. [in Russian only].
  • V.V. Sagaradze and A.I. Uvarov, Strengthening and Properties of Austenitic Steels, UB RAS, Ekaterinburg, Russian Federation, 2013, p. 720.
  • M.A. Shtremel, Which is the direction of diffusion? (Letter to the editorial board), Metal Sci. Heat Treat. 4 (2004) pp. 12–13.
  • S.N. Kolupaeva, V.A. Starenchenko, and L.E. Popov, Instabilities of the Plastic Deformation of Crystals, Tomsk University, Tomsk, 1994, p. 301. [in Russian only].
  • V.L. Indenbom, The interstitial (crowdionical) mechanism of plastic deformation and fracture, Pis’ma to Zh. Exp. Theor. Fiz. (Letters to Journal of Experimental and Theoretical Physics) 12 (1970), p. 469.
  • L.N. Larikov, V.M. Falchenko, V.F. Mazanko, S.M. Gurevich, G.K. Kharachenko, and A.I. Ignatenko, Anomalous acceleration of diffusion during impact loading of metals, Doklady AN SSSR (Proceedings of the USSR Academy of Sciences) 221 (1975) pp. 1073–1077[ in Russian].
  • YuA Skakov, High-energy cold plastic deformation, diffusion and mechanochemical synthesis, Metallovedenie i Termicheskaya Obrabotka Metallov (Met. Sci. Heat Treatment) 4 (2004), pp. 3–12.
  • V.A. Shabashov, V.V. Sagaradze, A.V. Litvinov, and K.A. Kozlov, Effect of the rate of cold plastic deformation on the kinetics of mechanical alloying of the Fe-35Ni-5Al alloy, Phys. Met. Metall. 109 (2010), pp. 483–491.10.1134/S0031918X10050091
  • P.M. Derlet, D. Nguyen-Manh, and S.L. Dudarev, Multiscale modeling of crowdion and vacancy defects in body-centered-cubic transition metals, Phys. Rev. B 76 (2007), p. 054107.10.1103/PhysRevB.76.054107
  • A.M. Iskandarov, N.N. Medvedev, P.V. Zakharov and S.V. Dmitriev, Crowdion mobility and self-focusing in 3D and 2D nickel, Comput. Mater. Sci. 47 (2009), pp. 429–431.10.1016/j.commatsci.2009.09.004
  • A.V. Markidonov, M.D. Starostenkov, T.I. Neverova, and A.A. Barchuk, Dynamic braking of complexes crowdions, Pis’ma o Materialakh (Lett. Mater.) 1 (2011), pp. 102–106.
  • I.M. Mikhailovskii and ZhI Dranova, Field-ion-microscopy study of interstitial plasticity of tungsten, Zh. Exp. Theor. Fiz. (J. Exp. Theor. Phys.) 63 (1972), p. 567.
  • Yu.I. Golovin, Nanoindentation and mechanical properties of solids in submicrovolumes, thin near-surface layers, and films: A Review, Fiz. Tverd. Tela (Phys. Solid State) 50 (2008), pp. 2205–2236.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.