Effect of initial orientation on the tensile properties of commercially pure titanium

References

• G. Lutjering and J.C. Williams , Titanium , Springer-Verlag Berlin, Heidelberg, 2003.10.1007/978-3-540-71398-2
   Google Scholar
• V.A. Joshi , Titanium Alloys , Taylor & Francis CRC Press, Boca Raton, 2006.10.1201/9781420006063
   Google Scholar
• M.J. Donachie , Titanium: A Technical Guide , ASM International, Metals Park, OH, 1988.
   Google Scholar
• C. Leyens and M. Peters , Titanium and Titanium Alloys , Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2003.10.1002/3527602119
   Google Scholar
• J.W. Christian and S. Mahajan , Titanium and titanium alloys , Prog. Mater. Sci. 39 (1995), pp. 1–157.10.1016/0079-6425(94)00007-7
   Google Scholar
• R.W. Hertzberg , Deformation and Fracture Mechanics of Engineering Materials , 4th ed. John Wiley & Sons, Chichester, 1996, pp. 105–115.10.1115/1.3443416
   Google Scholar
• J.P. Hirth and J. Lothe , Theory of Dislocations , 2nd ed., John Wiley & Sons, 1982, pp. 811–834.
   Google Scholar
• P.G. Partridge , The crystallography and deformation modes of hexagonal close-packed metals , Metall. Rev. 12 (1967), pp. 169–194.
   Google Scholar
• X.L. Wu , K.M. Youssef , C.C. Koch , S.N. Mathaudhu , L.J. Kecskes , and Y.T. Zhu , Deformation twinning in a nanocrystalline hcp Mg alloy , Scr. Mater. 64 (2011), pp. 213–216.10.1016/j.scriptamat.2010.10.024
   Web of Science ®Google Scholar
• M. Yuasa , M. Hayashi , M. Mabuchi , and Y. Chino , Atomic simulations of 101¯2 , 101¯1 twinning and 101¯2 detwinning in magnesium , J. Phys.: Condens. Matter 26 (2014), pp. 1–10. 015003.
   Web of Science ®Google Scholar
• A.E. Ekinci , N. Ucar , G. Cankaya , and B. Duzgun , Effect of temperature on slip and deformation twinning in Cd single-crystals , Indian J. Eng. Mater. Sci. 9 (2002), pp. 295–298.
   Web of Science ®Google Scholar
• M. Niewczas , Lattice correspondence during twinning in hexagonal close-packed crystals , Acta Mater. 58 (2010), pp. 5848–5857.10.1016/j.actamat.2010.06.059
   Web of Science ®Google Scholar
• L. Qu , Y. Yang , Y.F. Lu , L. Feng , J.H. Ju , P. Ge , and W. Zhou , A detwinning process of {3 3 2}〈1 1 1〉 , Scr. Mater. 69 (2013), pp. 389–392.10.1016/j.scriptamat.2013.05.028
   Web of Science ®Google Scholar
• W. Tirry , S. Bouvier , N. Benmhenni , W. Hammami , A.M. Habraken , F. Coghe , D. Schryvers , and L. Rabet , Twinning in pure Ti subjected to monotonic simple shear deformation , Mater. Charact. 72 (2012), pp. 24–36.10.1016/j.matchar.2012.07.001
   Web of Science ®Google Scholar
• E. Bertrand , P. Castany , I. Peron , and T. Gloriant , Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis , Scr. Mater. 64 (2011), pp. 1110–1113.10.1016/j.scriptamat.2011.02.033
   Web of Science ®Google Scholar
• L. Kucherov and E.B. Tadmor , Twin nucleation mechanisms at a crack tip in an hcp material: Molecular simulation , Acta Mater. 55 (2007), pp. 2065–2074.10.1016/j.actamat.2006.10.056
   Web of Science ®Google Scholar
• S.R. Niezgoda , A.K. Kanjarla , I.J. Beyerlein , and C.N. Tome , Stochastic modeling of twin nucleation in polycrystals: An application in hexagonal close-packed metals , Int. J. Plast. 56 (2014), pp. 119–138.10.1016/j.ijplas.2013.11.005
   Web of Science ®Google Scholar
• H. Yang , S. Yin , C. Huang , Z. Zhang , S. Wu , S. Li , and Y. Liu , EBSD study on deformation twinning in AZ31 magnesium alloy during quasi-in-situ compression , Adv. Eng. Mater. 10 (2008), pp. 955–960.10.1002/adem.v10:10
   Web of Science ®Google Scholar
• S. Asgari , E. El-Danaf , S.R. Kalidindi , and R.D. Doherty , Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins , Metall. Mater. Trans. A 28 (1997), pp. 1781–1795.10.1007/s11661-997-0109-3
   Web of Science ®Google Scholar
• A.A. Salem , S.R. Kalidindi , and R.D. Doherty , Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium , Scr. Mater. 46 (2002), pp. 419–423.10.1016/S1359-6462(02)00005-2
   Web of Science ®Google Scholar
• A.A. Salem , S.R. Kalidindi , and R.D. Doherty , Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium , Acta Mater. 51 (2003), pp. 4225–4237.10.1016/S1359-6454(03)00239-8
   Web of Science ®Google Scholar
• A.A. Salem , S.R. Kalidindi , R.D. Doherty , and S.L. Semiatin , Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium , Metall. Mater. Trans. A 37 (2006), pp. 259–268.10.1007/s11661-006-0171-2
   Web of Science ®Google Scholar
• A.A. Salem , S.R. Kalidindi , and S.L. Semiatin , Strain hardening due to deformation twinning in α-titanium: Constitutive relations and crystal-plasticity modeling , Acta Mater. 53 (2005), pp. 3495–3502.10.1016/j.actamat.2005.04.014
   Web of Science ®Google Scholar
• M.J. Tan and X.J. Zhu , Microstructure evolution of CP titanium during high temperature deformation , Arch. Mater. Sci. Eng. 28 (2007), pp. 5–11.
   Google Scholar
• M.J. Tan and X.J. Zhu , Dynamic recrystallization in commercially pure titanium , J. Achievements Mater. Manuf. Eng. 18 (2006), pp. 183–186.
   Google Scholar
• N. Bozzolo , N. Dewobroto , H.R. Wenk , and F. Wagner , Microstructure and microtexture of highly cold-rolled commercially pure titanium , J. Mater. Sci. 42 (2007), pp. 2405–2416.10.1007/s10853-006-1302-2
   Web of Science ®Google Scholar
• Y.J. Chen , Y.J. Li , J.C. Walmsley , S. Dumoulin , P.C Skaret , and H.J. Roven , Microstructure and microtexture of highly cold-rolled commercially pure titanium , Mater. Sci. Eng. A 527 (2010), pp. 789–796.10.1016/j.msea.2009.09.005
   Web of Science ®Google Scholar
• M.S. Rao , U. Chakkingal , and T. Raghu , Mechanical behavior of commercial purity titanium processed by equal channel angular pressing followed by cold rolling , Trans. Indian Inst. Met. 66 (2013), pp. 357–362.10.1007/s12666-013-0280-8
   Web of Science ®Google Scholar
• S. Nourbakhsh and T.D. O’Brien , Texture formation and transition in cold-rolled titanium , Mater. Sci. Eng. 100 (1988), pp. 109–114.10.1016/0025-5416(88)90245-5
   Google Scholar
• H.-T. Jiang , J.-X. Liu , Z.-L. Mi , A.-M. Zhao , and Y.-J. Bi , Texture formation and transition in cold-rolled titanium , Int. J. Miner. Metall. Mater. 19 (2012), pp. 530–535.10.1007/s12613-012-0591-5
   Web of Science ®Google Scholar
• S. Mei-qin , Y. Takayama , M. Chun-an , H. Watanabe , and H. Inoue , Texture formation and transition in cold-rolled titanium , Trans. Nonferrous Met. Soc. China 22 (2012), pp. 2616–2627.
   Web of Science ®Google Scholar
• M. Kuruvilla , T.S. Srivatsan , M. Petraroli , and L. Park , An investigation of microstructure, hardness, tensile behaviour of a titanium alloy: Role of orientation , Sadhana 33 (2008), pp. 235–250.10.1007/s12046-008-0017-2
   Web of Science ®Google Scholar
• A. Roth , M.A. Lebyodkin , T.A. Lebedkina , J.-S. Lecomte , T. Richeton , and K.E.K. Amouzou , An investigation of microstructure, hardness, tensile behaviour of a titanium alloy: Role of orientation , Mater. Sci. Eng. A 596 (2014), pp. 236–243.10.1016/j.msea.2013.12.061
   Web of Science ®Google Scholar
• C. Tomé , G.R. Canova , U.F. Kocks , N. Christodoulou , and J.J. Jonas , The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals , Acta Metall. 32 (1984), pp. 1637–1653.10.1016/0001-6160(84)90222-0
   Google Scholar
• R.A. Lebensohn and C.N. Tomé , A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys , Acta Metall. Mater. 41 (1993), pp. 2611–2624.10.1016/0956-7151(93)90130-K
   Google Scholar
• A. Molinari , G.R. Canova , and S. Ahzi , A self consistent approach of the large deformation polycrystal viscoplasticity , Acta Metall. 35 (1987), pp. 2983–2994.10.1016/0001-6160(87)90297-5
   Google Scholar
• N.P. Gurao , P. Kumar , B. Bhattacharya , A. Haldar , and S. Suwas , Evolution of crystallographic texture and microstructure during cold rolling of twinning-induced plasticity (TWIP) steel: Experiments and simulations , Metall. Mater. Trans. A 43 (2012), pp. 5193–5201.10.1007/s11661-012-1346-7
   Web of Science ®Google Scholar
• N. Jia , R. Lin Peng , D.W. Brown , B. Clausen , and Y.D. Wang , Tensile deformation behavior of duplex stainless steel studied by in-situ time-of-flight neutron diffraction , Metall. Mater. Trans. A (2008), pp. 3134–3140.10.1007/s11661-008-9675-2
   Web of Science ®Google Scholar
• S.R. Agnew and O. Duygulu , Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B , Int. J. Plast. 21 (2005), pp. 1161–1193.10.1016/j.ijplas.2004.05.018
   Web of Science ®Google Scholar
• TexTools Software, Resmat Corporation, Montreal, QC, Canada.
   Google Scholar
• R. Hill , Continuum micro-mechanics of elastoplastic polycrystals , J. Mech. Phys. Solids 13 (1965), pp. 89–101.10.1016/0022-5096(65)90023-2
   Web of Science ®Google Scholar
• J.W. Hutchinson , Elastic-plastic behaviour of polycrystalline metals and composites , Proc. R. Soc. London A 319 (1970), pp. 247–272.10.1098/rspa.1970.0177
   Web of Science ®Google Scholar
• H. Shi-yao , Z. Shao-rui , L. Da-yong , and P. Ying-hong , Modeling texture evolution during rolling process of AZ31 magnesium alloy with elasto-plastic self consistent model , Trans. Nonferrous Met. Soc. China 21 (2011), pp. 1348–1354.
   Web of Science ®Google Scholar
• W. Tang , D. Li , S. Huang , S. Zhang , and Y. Peng , Simulation of texture evolution in magnesium alloy: Comparisons of different polycrystal plasticity modeling approaches , Comput. Struct. 143 (2014), pp. 1–8.10.1016/j.compstruc.2014.07.015
   Web of Science ®Google Scholar
• A. Backzmanski and C. Braham , Elastoplastic properties of duplex steel determined using neutron diffraction and self-consistent model , Acta Mater. 52 (2004), pp. 1133–4153.10.1016/j.actamat.2003.10.046
   Web of Science ®Google Scholar
• P.A. Turner and C.N. Tome , A study of residual stresses in Zircaloy-2 with rod texture , Acta Metall. Mater. 42 (1994), pp. 4143–4153.10.1016/0956-7151(94)90191-0
   Google Scholar
• S. Merkel , C. Tome , and H.-R. Wenk , Modeling analysis of the influence of plasticity on high pressure deformation of hcp-Co , Phys. Rev. B 79 (2009), pp. 1–13. 064110.10.1103/PhysRevB.79.064110
   Web of Science ®Google Scholar
• C.J. Neil , J.A. Wollmershauser , B. Clausen , C.N. Tome , and S.R. Agnew , Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction , Int. J. Plast. 26 (2010), pp. 1772–1791.10.1016/j.ijplas.2010.03.005
   Web of Science ®Google Scholar
• C.N. Tome , E.C. Oliver , and J.A. Wollmershauser , EPSC-4 manual , 2010.
   Google Scholar
• G. Proust , C.N. Tome , and G.C. Kaschner , Modeling texture, twinning and hardening evolution during deformation of hexagonal materials , Acta Mater. 55 (2007), pp. 2137–2148.10.1016/j.actamat.2006.11.017
   Web of Science ®Google Scholar
• C.J. Neil and S.R. Agnew , Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B , Int. J. Plast. 25 (2009), pp. 379–398.10.1016/j.ijplas.2008.05.003
   Web of Science ®Google Scholar
• C.F. Gu , L.S. Toth , and M. Hoffman , Twinning effects in a polycrystalline magnesium alloy under cyclic deformation , Acta Mater. 62 (2014), pp. 212–224.10.1016/j.actamat.2013.09.048
   Web of Science ®Google Scholar
• S. Sinha , J.A. Szpunar , N.A.P. Kiran Kumar , and N.P. Gurao , Tensile deformation of 316L austenitic stainless steel using in-situ electron backscatter diffraction and crystal plasticity simulations , Mater. Sci. Eng. A 637 (2015), pp. 48–55.10.1016/j.msea.2015.04.005
   Web of Science ®Google Scholar
• D. Tromans , Elastic anisotropy of HCP metal crystals and polycrystals , Int. J. Res. Rev. 6 (2011), pp. 462–483.
   Google Scholar
• L. Bao , C. Schuman , Q. Le , J.-S. Lecomte , Z. Zhang , M.-J. Philippe , J. Cui , and C. Esling , A novel method for predicting variant selection during primary, secondary and tertiary twinning in titanium , Mater. Lett. 132 (2014), pp. 162–166.10.1016/j.matlet.2014.06.080
   Web of Science ®Google Scholar
• M. Arul Kumar , A.K. Kanjarla , S.R. Niezgoda , R.A. Lebensohn , and C.N. Tome , Numerical study of the stress state of a deformation twin in magnesium , Acta Mater. 84 (2015) pp. 349–358.10.1016/j.actamat.2014.10.048
   Web of Science ®Google Scholar
• T.B. Britton and A.J. Wilkinson , Stress fields and geometrically necessary dislocation density distributions near the head of a blocked slip band , Acta Mater. 60 (2012), pp. 5773–5782.10.1016/j.actamat.2012.07.004
   Web of Science ®Google Scholar
• A. Khosravani , D.T. Fullwood , B.L. Adams , T.M. Rampton , M.P. Miles , and R.K. Mishra , Nucleation and propagation of twins in AZ31 magnesium alloy , Acta Mater. 100 (2015), pp. 202–214.10.1016/j.actamat.2015.08.024
   Web of Science ®Google Scholar
• N.P. Gurao , R. Kapoor , and S. Suwas , Deformation behaviour of commercially pure titanium at extreme strain rates , Acta Mater. 59 (2011), pp. 3431–3446.10.1016/j.actamat.2011.02.018
   Web of Science ®Google Scholar
• S. Suwas , B. Beausir , L.S. Toth , J.-J. Fundenberger , and G. Gottstein , Texture evolution in commercially pure titanium after warm equal channel angular extrusion , Acta Mater. 59 (2011), pp. 1121–1133.
   Web of Science ®Google Scholar
• H. Li , D.E. Mason , Y. Yang , T.R. Bieler , M.A. Crimp , and C.J. Boehlert , Comparison of the deformation behaviour of commercially pure titanium and Ti-5Al-2.5Sn(wt.%) at 296 and 728 K , Philos. Mag. 93 (2013), pp. 2875–2895.10.1080/14786435.2013.791752
   Web of Science ®Google Scholar
• B. Barkia , V. Doquet , J.P. Couzinie , I. Guillot , and E. Heripre , In situ monitoring of the deformation mechanisms in titanium with different oxygen contents , Mater. Sci. Eng. A 636 (2015), pp. 91–102.10.1016/j.msea.2015.03.044
   Web of Science ®Google Scholar
• J. Woo Won , K.-T. Park , S.-G. Hong , and C.S. Lee , Anisotropic yielding behavior of rolling textured high purity titanium , Mater. Sci. Eng. A 637 (2015) pp. 215–221.10.1016/j.msea.2015.03.096
   Web of Science ®Google Scholar
• K.E.K. Amouzou , T. Richeton , A. Roth , M.A. Lebyodkin , and T.A. Lebedkina , Int. J. Plast. (2015), pp. 1–19. Available at http://dx.doi.org/10.1016/j.ijplas.2015.09.008.
   Google Scholar
• S. Wronski , K. Wierzbanowski , M. Jedrychowski , J. Tarasiuk , M. Wronski , A. Baczmanski , and B. Bacroix , Microstructure evolution of titanium after tensile test , Mater. Sci. Eng. A 656 (2016), pp. 1–11.10.1016/j.msea.2015.12.041
   Web of Science ®Google Scholar
• N. Yi , T. Hama , A. Kobuki , H. Fujimoto , and H. Takuda , The transformation of slip dislocations during twinning of copper–aluminum alloy crystals , Mater. Sci. Eng. A 655 (2016), pp. 70–85.10.1016/j.msea.2015.12.081
   Web of Science ®Google Scholar
• Z.S. Basinski , M.S. Szczerba , M. Niewczas , J.D. Embury , and S.J. Basinski , The transformation of slip dislocations during twinning of copper–aluminum alloy crystals , Rev. Metall. 94 (1997), pp. 1037–1043.
   Web of Science ®Google Scholar
• A. Ghosh and N.P. Gurao , Evolution of deformation heterogeneity at multiple length scales in a strongly textured zinc layer on galvanized steel , Vol. 82, IOP Conference Series Materials Science and Engineering, Dresden, 2015, pp. 1–5.
   Google Scholar