Crystallographic study of grain refinement in low and medium carbon steels

References

• J.A. Spittle , Columnar to equiaxed grain transition in as solidified alloys , Int. Mater. Rev. 51 (2006), pp. 247–269.10.1179/174328006X102493
   Web of Science ®Google Scholar
• J. Brimacombe , The challenge of quality in continuous casting processes , Metall. Mater. Trans. A 30 (1999), pp. 1899–1912.10.1007/s11661-999-0001-4
   Web of Science ®Google Scholar
• K. Lo , C. Shek , and J. Lai , Recent developments in stainless steels , Mater. Sci. Eng., R: Rep. 65 (2009), pp. 39–104.10.1016/j.mser.2009.03.001
   Web of Science ®Google Scholar
• D. Qiu , M.-X. Zhang , H.-M. Fu , P. Kelly , and J. Taylor , Crystallography of recently developed grain refiners for Mg–Al alloys , Philos. Mag. Lett. 87(7) (2007), pp. 505–514.10.1080/09500830701253151
   Web of Science ®Google Scholar
• A.A. Tzavaras and H. Brody , Electromagnetic stirring and continuous casting – Achievements, problems, and goals , JOM 36 (1984), pp. 31–37.10.1007/BF03338405
   Web of Science ®Google Scholar
• D. StJohn , M.-X. Zhang , H.-M. Fu , P. Kelly , and J. Taylor , Grain refinement of magnesium alloys , Metall. Mater. Trans. A 36 (2005), pp. 1669–1679.10.1007/s11661-005-0030-6
   Web of Science ®Google Scholar
• M.-X. Zhang and P.M. Kelly , Crystallographic features of phase transformations in solids , Prog. Mater Sci. 54 (2009), pp. 1101–1170.10.1016/j.pmatsci.2009.06.001
   Web of Science ®Google Scholar
• P. Kelly and M. Zhang , Edge-to-edge matching-a new approach to the morphology and crystallography of precipitates , Mater. Forum 43 (1999), pp. 41–62.
   Google Scholar
• M.-X. Zhang , P. Kelly , M. Easton , and J. Taylor , Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model , Acta Mater. 53 (2005), pp. 1427–1438.10.1016/j.actamat.2004.11.037
   Web of Science ®Google Scholar
• B.L. Bramfitt , The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron , Metall. Trans. 1 (1970), pp. 1987–1995.10.1007/BF02642799
   Web of Science ®Google Scholar
• H. Li , A. McLean , J. Rutter , and I. Sommerville , Influence of rare earth metals on the nucleation and solidification behavior of iron and 1045 steel , Metall. Trans. B 19 (1988), pp. 383–395.10.1007/BF02657736
   Web of Science ®Google Scholar
• E. Grong , L. Kolbeinsen , C. van der Eijk , and G. Tranell , Microstructure control of steels through dispersoid metallurgy using novel grain refining alloys , ISIJ Int. 46 (2006), pp. 824–831.10.2355/isijinternational.46.824
   Web of Science ®Google Scholar
• R. Tuttle , Examination of steel castings for potential nucleation phases , Int. J. Metalcast. 4 (2010), pp. 17–25.10.1007/BF03355495
   Web of Science ®Google Scholar
• A. Hunter and M. Ferry , Texture enhancement by inoculation during casting of ferritic stainless steel strip , Metall. Mater. Trans. A 33 (2002), pp. 1499–1507.10.1007/s11661-002-0072-y
   Web of Science ®Google Scholar
• Y. Shan , X. Luo , X. Hu , and S. Liu , Mechanisms of solidification structure improvement of ultra pure 17 wt% Cr ferritic stainless steel by Ti, Nb addition , J. Mater. Sci. Technol. 27 (2011), pp. 352–358.
   Web of Science ®Google Scholar
• M. Ohno and K. Matsuura , Numerical analysis on columnar-to-equiaxed transition of δ-ferrite dendrite in carbon steel induced by titanium carbonitride particles , ISIJ Int. 49 (2009), pp. 1568–1574.10.2355/isijinternational.49.1568
   Web of Science ®Google Scholar
• K. Nakajima , H. Hasegawa , S. Khumkoa , and S. Mizoguchi , Effect of a catalyst on heterogeneous nucleation in pure and Fe–Ni alloys , Metall. Mater. Trans. B 34 (2003), pp. 539–547.10.1007/s11663-003-0022-0
   Web of Science ®Google Scholar
• C. Wang , H. Gao , Y. Dai , X. Ruan , J. Wang , and B. Sun , Grain refining of 409L ferritic stainless steel using Fe–Ti–N master alloy , Metall. Mater. Trans. A 41 (2010), pp. 1616–1620.10.1007/s11661-010-0228-0
   Web of Science ®Google Scholar
• C.-X. Shi , G.-G. Cheng , Z.-J. Li , and P. Zhao , Solidification structure refining of 430 ferrite stainless steel with TiN nucleation , J. Iron Steel Res. Int. 15 (2008), pp. 57–60.10.1016/S1006-706X(08)60126-0
   Web of Science ®Google Scholar
• J.H. Park , Effect of inclusions on the solidification structures of ferritic stainless steel: Computational and experimental study of inclusion evolution , Calphad 35 (2011), pp. 455–462.10.1016/j.calphad.2011.08.004
   Web of Science ®Google Scholar
• T. Koseki , H. Inoue , Y. Fukuda , and A. Nogami , Numerical simulation of equiaxed grain formation in weld solidification , Sci. Technol. Adv. Mater. 4 (2003), pp. 183–195.10.1016/S1468-6996(03)00026-3
   Web of Science ®Google Scholar
• T.E. Roberts , D. Kovarik , and R. Maier , The solidification and grain refinement of cast austenitic stainless steels , Am. Foundrymen’s Soc. 87 (1980), pp. 279–298.
   Google Scholar
• R. Tuttle , Effect of rare earth additions on grain refinement of plain carbon steels , Int. J. Metalcast. 6 (2012), pp. 51–65.10.1007/BF03355527
   Web of Science ®Google Scholar
• Y. Nuri , T. Ohashi , T. Hiromoto , and O. Kitamura , Solidification microstructure of ingots and continuously cast slabs treated with rare earth metal, Trans. Iron Steel Inst. Jpn. 22 (1982), pp. 399–407.10.2355/isijinternational1966.22.399
   Google Scholar
• E.F. Nordstrand , The metallurgical foundation for manufacturing of CeS-based grain refiners for steels , Ph.D. diss., Norwegian University of Science and Technology, 2009.
   Google Scholar
• M. Guo and H. Suito , Influence of dissolved cerium and primary inclusion particles of Ce2O3 and CeS on solidification behavior of Fe–0.20mass%C–0.02mass%P alloy , ISIJ Int. 39 (1999), pp. 722–729.10.2355/isijinternational.39.722
   Web of Science ®Google Scholar
• J. Janis , K. Nakajima , A. Karasev , S. Jonsson , R. Inoue , and P. Jonsson , Effects of primary oxide and oxide-nitride particles on the solidification structure in a Fe-20 mass%Cr alloy deoxidised with Ti and M (M = Zr or Ce) , ISIJ Int. 53 (2013), pp. 221–229.10.2355/isijinternational.53.221
   Web of Science ®Google Scholar
• M. Guo and H. Suito , Pinning of austenite grain boundary of Fe-0.09 to 0.53mass% C-0.02mass%P alloys by primary inclusions of Ce2O3 and CeS , ISIJ Int. 39 (1999), pp. 1289–1296.10.2355/isijinternational.39.1289
   Web of Science ®Google Scholar
• H. Suito , H. Ohta , and S. Morioka , Refinement of solidification microstructure and austenite grain by fine inclusion particles , ISIJ Int. 46 (2006), pp. 840–846.10.2355/isijinternational.46.840
   Web of Science ®Google Scholar
• J. Lan , J. He , W. Ding , Q. Wang , and Y. Zhu , Effect of rare earth metals on the microstructure and impact toughness of a cast 0.4C-5Cr-1.2Mo-1.0V Steel , ISIJ Int. 40 (2000), pp. 1275–1282.10.2355/isijinternational.40.1275
   Web of Science ®Google Scholar
• B. Wen , B. Song , N. Pan , Q.-F. Shu , X.-J. Hu , and J.-H. Mao , Influence of Ce on characteristics of inclusions and microstructure of pure iron , J. Iron Steel Res. Int. 18 (2011), pp. 38–44.10.1016/S1006-706X(11)60021-6
   Web of Science ®Google Scholar
• H. Fu , Y. Miao , X. Chen , K. Hu , and Z. Tian , A study of microstructures and properties of high-carbon Si–Cr cast steel containing rare earth and titanium , Materialwiss. Werkstofftech. 38 (2007), pp. 233–238.10.1002/(ISSN)1521-4052
   Web of Science ®Google Scholar
• R.B. Tuttle , Effect of NbO additions on the grain size of 1010 steel castings , J. Mater. Eng. Perform. 22 (2013), pp. 145–151.10.1007/s11665-012-0248-6
   Web of Science ®Google Scholar
• M. Easton and D. StJohn , Grain refinement of aluminum alloys: Part I. The nucleant and solute paradigms – A review of the literature , Metall. Mater. Trans. A 30 (1999), pp. 1613–1623.10.1007/s11661-999-0098-5
   Web of Science ®Google Scholar
• M. Bermingham , S. McDonald , M. Dargusch , and D. StJohn , The mechanism of grain refinement of titanium by silicon , Scr. Mater. 58 (2008), pp. 1050–1053.10.1016/j.scriptamat.2008.01.041
   Web of Science ®Google Scholar
• M.-X. Zhang and P. Kelly , Edge-to-edge matching model for predicting orientation relationships and habit planes – The improvements, Scr. Mater. 52 (2005), pp. 963–968.10.1016/j.scriptamat.2005.01.040
   Web of Science ®Google Scholar
• M.-X. Zhang and P. Kelly , Edge-to-edge matching and its applications: Part I. Application to the simple HCP/BCC system , Acta Mater. 53 (2005), pp. 1073–1084.10.1016/j.actamat.2004.11.007
   Web of Science ®Google Scholar
• D. Qiu , J. Taylor , and M.-X. Zhang , Understanding the co-poisoning effect of Zr and Ti on the grain refinement of cast aluminum alloys, Metall. Mater. Trans. A 41 (2010), pp. 3412–3421.10.1007/s11661-010-0404-2
   Web of Science ®Google Scholar
• F. Wang , D. Qiu , Z.-L. Liu , J.A. Taylor , M.A. Easton, and M.-X. Zhang , The grain refinement mechanism of cast aluminium by zirconium , Acta Mater. 61 (2013), pp. 5636–5645.10.1016/j.actamat.2013.05.044
   Web of Science ®Google Scholar
• D. Qiu , M.-X. Zhang , J. Taylor , and P. Kelly , A new approach to designing a grain refiner for Mg casting alloys and its use in Mg–Y-based alloys , Acta Mater. 57 (2009), pp. 3052–3059.10.1016/j.actamat.2009.03.011
   Web of Science ®Google Scholar
• M.-X. Zhang and P. Kelly , Edge-to-edge matching and its applications: Part II. Application to Mg–Al, Mg–Y and Mg–Mn alloys , Acta Mater. 53 (2005), pp. 1085–1096.10.1016/j.actamat.2004.11.005
   Web of Science ®Google Scholar
• H. Fu , M.-X. Zhang , D. Qiu , P. Kelly , and J. Taylor , Grain refinement by AlN particles in Mg–Al based alloys , J. Alloy. Compd. 478 (2009), pp. 809–812.10.1016/j.jallcom.2008.12.029
   Web of Science ®Google Scholar
• D. Qiu , J. Taylor , M.-X. Zhang , and P. Kelly , A mechanism for the poisoning effect of silicon on the grain refinement of Al–Si alloys , Acta Mater. 55 (2007), pp. 1447–1456.10.1016/j.actamat.2006.09.046
   Web of Science ®Google Scholar
• A. Christensen , Temperature factor parameters of some transition-metal carbides and nitrides by single-crystal X-ray and neutron-diffraction , Munksgaard Int, Copenhagen, 1978. pp. 89–90.
   Google Scholar
• H. Bartholin , A. Waintal , G. Parisot , F. Kervella , and J. Senateur , Effect of pressure on the crystal lattice parameters of CeAl2, PrAl2, YbAl2, and CeS . Phys. Status Solidi (a) 61 (1980), pp. K87–K90.10.1002/(ISSN)1521-396X
   Google Scholar
• H. Bärnighausen and G. Schiller , The crystal structure of A-Ce2O3 , J. Less Common Met. 110 (1985), pp. 385–390.10.1016/0022-5088(85)90347-9
   Google Scholar
• B. Marinder , Crystal structure of niobium dioxide , Arkiv For Kemi 19 (1962), pp. 435–439.
   Google Scholar
• M.I. Aroyo , J.M. Perez-Mato , C. Capillas , E. Kroumova , S. Ivantchev , G. Madariaga , A. Kirov , and H. Wondratschek , Bilbao crystallographic server: I. Databases and crystallographic computing programs , Z. Kristallogr. 221 (2006), pp. 15–27.
   Web of Science ®Google Scholar
• N. Pan , B. Song , Q. Zhai , and B. Wen , Effect of lattice disregistry on the heterogeneous nucleation catalysis of liquid steel , J. Univ. Sci. Technol. Beijing, Miner. Metall. Mater. 32 (2010), pp. 179–182.
   Google Scholar
• S. Ohba , Y. Saito , and Y. Noda , A measurement of charge asphericity in iron metal , Acta Crystallogr., Sect. A 38 (1982), pp. 725–729.10.1107/S0567739482001454
   Web of Science ®Google Scholar
• B. Jiang , D. Qiu , M.-X. Zhang , P. Ding , and L. Gao , A new approach to grain refinement of an Mg–Li–Al cast alloy , J. Alloy. Compd. 492 (2010), pp. 95–98.10.1016/j.jallcom.2009.11.066
   Web of Science ®Google Scholar
• D. Qiu , M.-X. Zhang , J. Taylor , H.-M. Fu , and P. Kelly , A novel approach to the mechanism for the grain refining effect of melt superheating of Mg–Al alloys , Acta Mater. 55 (2007), pp. 1863–1871.10.1016/j.actamat.2006.10.047
   Web of Science ®Google Scholar
• R. Baker and J. Nutting , Precipitation processes in steels , ISI Special Report, Japan, 1959.
   Google Scholar
• D. Duly , Application of the invariant line model for b.c.c./h.c.p. couples: A criterion based on surface variations , Acta Metall. Mater. 41 (1993), pp. 1559–1566.10.1016/0956-7151(93)90264-S
   Google Scholar
• W.-Z. Zhang and G. Weatherly , On the crystallography of precipitation , Prog. Mater Sci. 50 (2005), pp. 181–292.10.1016/j.pmatsci.2004.04.002
   Web of Science ®Google Scholar
• P. Kelly , H.-P. Ren , D. Qiu , and M.-X. Zhang , Identifying close-packed planes in complex crystal structures , Acta Mater. 58 (2010), pp. 3091–3095.10.1016/j.actamat.2010.01.046
   Web of Science ®Google Scholar
• T. Koseki and H. Inoue , Equiaxed solidification of steel nucleating on titanium nitride , J. Jpn. Inst. Met. 65 (2001), pp. 644–651.
   Web of Science ®Google Scholar
• Y. Nuri , T. Ohashi , T. Hiromoto , and O. Kitamura , Solidification macrostructure of ingots and continuously cast slabs treated with rare earth metal , Trans. Iron Steel Inst. Jpn. 22 (1982), pp. 408–416.10.2355/isijinternational1966.22.408
   Google Scholar
• X. Chen , Y. Li , and H. Zhang , Microstructure and mechanical properties of high boron white cast iron with about 4 wt% chromium , J. Mater. Sci. 46 (2011), pp. 957–963.10.1007/s10853-010-4840-6
   Web of Science ®Google Scholar
• C.S. Smith , Grains, phases, and interphases: An interpretation of microstructure , Trans. Metall. Soc. AIME 175 (1948), pp. 15–51.
   Google Scholar
• A.V. Karasev and H. Suito , Effects of oxide particles and solute elements on austenite grain growth in Fe–0.05mass%C and Fe–10mass%Ni alloys , ISIJ Int. 48 (2008), pp. 658–666.10.2355/isijinternational.48.658
   Web of Science ®Google Scholar
• M. Radulovic , M. Fiset , and K. Peev , Effect of rare earth elements on microstructure and properties of high chromium white iron , Mater. Sci. Technol. 10 (1994), pp. 1057–1062.
   Web of Science ®Google Scholar
• D. Qiu , M.-X. Zhang , and P.M. Kelly , Crystallography of heterogeneous nucleation of Mg grains on Al2Y nucleation particles in an Mg–10wt.% Y alloy , Scr. Mater. 61 (2009), pp. 312–315.10.1016/j.scriptamat.2009.04.011
   Web of Science ®Google Scholar
• Y. Jingsheng , Y. Zongsen , and W. Chengjian , Rare earths and the mechanical properties off steel , JOM 40 (1988), pp. 26–31.10.1007/BF03258907
   Web of Science ®Google Scholar
• W. Zachariasen , Crystal chemical studies of the 5f-series of elements. VII. The crystal structure of Ce2O2S, La2O2S and Pu2O2S , Acta Crystallogr. 2 (1949), pp. 60–62.10.1107/S0365110X49000138
   Web of Science ®Google Scholar
• T. Schleid and P. Lauxmann , X-ray structure analyses for single crystals of A-and C-type Ce2S3 , ChemInform 30 (1999), pp. 1053–1055.
   Google Scholar
• J.M. Gregg and H.K.D.H. Bhadeshia , Solid-state nucleation of acicular ferrite on minerals added to molten steel , Acta Mater. 45 (1997), pp. 739–748.10.1016/S1359-6454(96)00187-5
   Web of Science ®Google Scholar
• A.R. Mills , G. Thewlis , and J.A. Whiteman , Nature of inclusions in steel weld metals and their influence on formation of acicular ferrite , Mater. Sci. Technol. 3 (1987), pp. 1051–1061.10.1179/mst.1987.3.12.1051
   Web of Science ®Google Scholar