Electrical characteristics of p-Si/TiO₂/Al and p-Si/TiO₂-Zr/Al Schottky devices

References

• H.C. Card and E.H. Rhoderick, Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes, J. Phys. D: Appl. Phys. 4 (1971), pp. 1589–1601.10.1088/0022-3727/4/10/319
   Web of Science ®Google Scholar
• A. Singh, K.C. Reinhardt, and W.A. Anderson, Temperature dependence of the electrical characteristics of Yb/p-InP tunnel metal-insulator-semiconductor junctions, J. Appl. Phys. 68 (1990), pp. 3475–3483.10.1063/1.346358
   Web of Science ®Google Scholar
• S. Chand and J. Kumar, Current–voltage characteristics and barrier parameters of Pd2Si/p-Si(111) Schottky diodes in a wide temperature range, Semicond. Sci. Technol. 10 (1995), pp. 1680–1688.10.1088/0268-1242/10/12/019
   Web of Science ®Google Scholar
• İ. Dökme, The analysis of I–V characteristics of Schottky diodes by thermionic emission with a Gaussian distribution of barrier height, Microelectronics Reliab. 51 (2011), pp. 360–364.10.1016/j.microrel.2010.08.017
   Web of Science ®Google Scholar
• S. Çetinkaya, H.A. Çetinkara, S. Kahraman, and F. Bayansal, Characterization of Al/n-ZnO/p-Si/Al structure with low-cost solution-grown ZnO layer, Philos. Mag. 93 (2015), pp. 550–559.
   Web of Science ®Google Scholar
• Ş. Aydoğan, M. Sağlam, and A. Türüt, On the barrier inhomogeneites of polyaniline/P-Si/Al structure at low temperature, Appl. Surf. Sci. 250 (2005), pp. 43–49.10.1016/j.apsusc.2004.12.020
   Web of Science ®Google Scholar
• M. Biber, Ö. Güllü, S. Forment, R.L. Van Meirhaeghe, and A. Türüt, The effect of Schottky metal thickness on barrier height inhomogeneity in identically prepared Au/n-GaAs Schottky diodes, Semicond Sci. Technol. 21 (2006), pp. 1–5.10.1088/0268-1242/21/1/001
   Web of Science ®Google Scholar
• S. Alialy, A. Kaya, E. Marıl, Ş. Altındal, and İ. Uslu, Electronic transport of Au/(Ca1.9Pr 0.1Co4Ox)/n-Si structures analysed over a wide temperature range, Philos. Mag. 95 (2015), pp. 1448–1461.10.1080/14786435.2015.1033029
   Web of Science ®Google Scholar
• Ş. Altındal, A. Tataroğlu, and İ. Dökme, Density of interface states, excess capacitance and series resistance in the metal–insulator–semiconductor (MIS) solar cells, Sol. Energy Mater. Sol. Cells 85 (2005), pp. 345–358.10.1016/j.solmat.2004.05.004
   Web of Science ®Google Scholar
• I. Dokme and Ş. Altindal, Comparative analysis of temperature-dependent electrical and dielectric properties of an Schottky device at two frequencies, IEEE Trans. Electron Devices 58 (2011), pp. 4042–4048.10.1109/TED.2011.2165846
   Web of Science ®Google Scholar
• A. Kaya, Ö. Vural, H. Tecimer, S. Demirezen, and Ş. Altındal, Frequency and voltage dependence of dielectric properties and electric modulus in Au/PVC ş TCNQ/p-Si structure at room temperature, Curr. Appl. Phys. 14 (2014), pp. 322–330.10.1016/j.cap.2013.12.005
   Web of Science ®Google Scholar
• E. Marıl, Ş. Altındal, A. Kaya, S. Koçyiğit, and İ. Uslu, On double exponential forward bias currentvoltage (I–V) characteristics of Au/Ca3Co4Ga0.001Ox/ n-Si/Au (MIS) type structures in temperature range of 80–340 K, Philos. Mag. 95 (2015), pp. 1049–1068.10.1080/14786435.2015.1009517
   Web of Science ®Google Scholar
• H. Doğan, H. Korkut, N. Yıldırım, and A. Turut, Prediction of lateral barrier height in identically prepared Ni/n-type GaAs Schottky barrier diodes, Appl. Surf. Sci. 253 (2007), pp. 7467–7470.
   Web of Science ®Google Scholar
• G. Güler, Ö. Güllü, Ö.F. Bakkaloglu, and A. Türüt, Determination of lateral barrier height of identically prepared Ni/n -type Si Schottky barrier diodes by electrodeposition. Physica B 403 (2008), pp. 2211.10.1016/j.physb.2007.11.032
   Web of Science ®Google Scholar
• A. Sarıyıldız, O. Vural, M. Evecen, and S. Altındal, Single Gaussian distribution of barrier height in Al/PS–ZnPc/p-Si type Schottky barrier diode in temperature range of 120–320 K, J. Mater. Sci.: Mater. Electron. 25 (2014), pp. 4391–4397.
   Web of Science ®Google Scholar
• I. Dökme, The effect of series resistance and oxide layer formed by thermal oxidation on some electrical parameters of Al/SiO2/p-Si Schottky diodes, Physica B 388 (2007), pp. 10–15.10.1016/j.physb.2006.04.032
   Web of Science ®Google Scholar
• I. Dökme, Ş. Altındal, and İ.M Afandiyeva, The distribution of the barrier height in Al–TiW–Pd2Si/n-Si Schottky diodes from I–V–T measurements, Semicond. Sci. Technol. 23 (2008), p. 035003.10.1088/0268-1242/23/3/035003
   Google Scholar
• S.M. Sze, Physics of Semiconductor Devices, Wiley, New York, NY, 1981.
   Google Scholar
• E.H. Rhoderick and R.H. Williams, Metal Semiconductor Contacts, 2nd ed., Clarendon Press, Oxford, 1988.
   Google Scholar
• A. Tataroğlu, Ş. Altındal, and M.M. Bülbül, Temperature and frequency dependent electrical and dielectric properties of Al/SiO2/p-Si (MOS) structure, Microelectron. Eng. 81 (2005), pp. 140–149.10.1016/j.mee.2005.04.008
   Web of Science ®Google Scholar
• A. Turut, M. Sağlam, E. Efeoğdlu, N. Yalcin, M. Yildirim, and B. Abay, Interpreting the nonideal reverse bias C–V characteristics and importance of the dependence of Schottky barrier height on applied voltage, Physica B 205 (1995), pp. 41–50.10.1016/0921-4526(94)00229-O
   Web of Science ®Google Scholar
• P. Cova and A. Singh, Temperature dependence of I–V and C–V characteristics of Ni/n-CdF2 Schottky barrier type diodes, Solid-State Electron. 33 (1990), pp. 11–19.10.1016/0038-1101(90)90003-W
   Web of Science ®Google Scholar
• I. Dökme, T. Tunc, I. Uslu, and Ş. Altındal, The Au/polyvinyl alcohol (Co, Zn-doped)/n-type silicon Schottky barrier devices, Synth. Met. 161 (2011), pp. 474–480.10.1016/j.synthmet.2011.01.002
   Web of Science ®Google Scholar
• T. Tunç, Ş. Altindal, I. Uslu, I. Dökme, and H. Uslu, Temperature dependet Current–Voltage (I–V) characteristics of Au/n-Si (111) Schottky barrier diodes with PVA (Ni, Zn-doped) interfacial layer. Mater. Sci. Semicond. Process. 14 (2011), pp. 139–145.10.1016/j.mssp.2011.01.018
   Web of Science ®Google Scholar
• T.J. Miller and G.B. Backes, Schottky-barrıer heıght modıfıcatıon on n-type and p-type gaınp wıth thın ınterfacıal SI, J. Appl. Phys. 76 (1994), pp. 7931–7934.10.1063/1.357903
   Web of Science ®Google Scholar
• R. Tyagi and T.P. Chow, Schottky barrier modification on InP using shallow implant layer, J. Electron. Mater. 22 (1993), pp. 221–227.10.1007/BF02665030
   Web of Science ®Google Scholar
• M. Bı̇ber, C. Temı̇rcı̇, and A. Türüt, Barrier height enhancement in the Au/n-GaAs Schottky diodes with anodization process, J. Vac. Sci. Technol. B 20 (2002), pp. 10–13.10.1116/1.1426369
   Web of Science ®Google Scholar
• J. Almeida, C. Coluzza, T. dell’Orto, G. Margaritando, A. Terrasi, and J. Ivanco, Au/GaAs (100) interface Schottky barrier modification by a silicon nitride intralayer, J. Appl. Phys. 81 (1997), pp. 292–296.10.1063/1.363847
   Web of Science ®Google Scholar
• M.E. Aydin, K. Akkiliç, and T. Kiliçoğlu, The importance of the series resistance in calculating the characteristic parameters of the Schottky contacts, Appl. Surf. Sci. 253 (2006), pp. 1304–1309.10.1016/j.apsusc.2006.02.001
   Web of Science ®Google Scholar
• T. Tunç, Ş. Altındal, İlbilge Dökme, and H. Uslu, Anomalous peak in the forward-bias C–V plot and temperature-dependent behavior of Au/PVA (Ni, Zndoped)/n -Si(111) structures, J. Electron. Mater. 40 (2011), pp. 157–164.10.1007/s11664-010-1440-9
   Web of Science ®Google Scholar
• T. Tunc, I. Uslu, I. Dökme, Ş. Altindal, and H. Uslu, Frequency and temperature dependence of dielectric properties of Au/polyvinyl alcohol (Co, Ni-doped)/n-Si Schottky diodes, Int. J. Polym. Sci. 59 (2010), pp. 739–756.
   Web of Science ®Google Scholar
• S. Alialy, Ş. Altındal, E.E. Tanrıkulu, and D.E. Yıldız, Analysis of temperature dependent current-conduction mechanisms in Au/TiO2/n-4H-SiC (metal/insulator/semiconductor) type Schottky barrier diodes, J. Appl. Phys. 116 (2014), pp. 083709.10.1063/1.4893970
   Google Scholar
• F. Hossein-Babaei, M.M. Lajvardi, and N. Alaei-Sheini, The energy barrier at noble metal/TiO2 junctions, Appl. Phys. Lett. 106 (2015), p. 083503.10.1063/1.4913667
   Google Scholar
• M.A. Khan and Y. Kang, Synthesis and electrochemical analysis of a nanostructured spindle shaped TiO2, Mater. Lett. 156 (2015), pp. 209–213.10.1016/j.matlet.2015.05.031
   Web of Science ®Google Scholar
• Y.Ş. Asar, T. Asar, Ş. Altındal, and S. Özçelik, Investigation of dielectric relaxation and ac electrical conductivity using impedance spectroscopy method in (AuZn)/TiO2/p-GaAs(1 1 0) schottky barrier diodes, J. Alloys Compd. 628 (2015), pp. 442–449.10.1016/j.jallcom.2014.12.170
   Web of Science ®Google Scholar
• N.M. Mohamed, M. Khatani, N.H. Hamid, A.Z. Sahmer, and S.N.A. Zaine, Performance analysis of dye solar cell with additional TiO2layer under different light Intensities, Mater. Sci. Semicond. Process. 38 (2015), pp. 381–386.10.1016/j.mssp.2015.04.012
   Web of Science ®Google Scholar
• B. Tsui, J. Cheng, L. Lee, C. Lee, and M. Tsai, Schottky barrier height modification of metal/4H-SiC contact using ultrathin TiO2 insertion method. Jpn. J. Appl. Phys. 53 (2014), pp. 04EP10.10.7567/JJAP.53.04EP10
   Google Scholar
• S.B.K. Aydın, D.E. Yıldız, H.K. Çavuş, and R. Şahı̇ngöz, ALD TiO2 thin film as dielectric for Al/p-Si Schottky diode, Bull. Mater. Sci. 37 (2014), pp. 1563–1568.10.1007/s12034-014-0726-6
   Web of Science ®Google Scholar
• O. Carp, C.L. Huisman, and A. Reller, Photoinduced reactivity of titanium dioxide, Prog. Solid State Chem. 32 (2004), pp. 33–177.10.1016/j.progsolidstchem.2004.08.001
   Web of Science ®Google Scholar
• G.S. Mital and T. Manoj, A review of TiO2 nanoparticles, Chin. Sci. Bull. 56 (2011), pp. 1639–1657.
   Web of Science ®Google Scholar
• B. Gao, T.M. Lim, D.P. Subagio, and T.T. Lim, Zr-doped TiO2 for enhanced photocatalytic degradation of bisphenol A, Appl. Catal., A 375 (2010), pp. 107–115.10.1016/j.apcata.2009.12.025
   Web of Science ®Google Scholar
• M.C. Sekhar, N.N.K. Reddy, B.V. Rao, G.M. Raoc, and S. Uthanna, Peak picking as a pre-processing technique for imaging time of flight secondary ion mass spectrometry, Surf. Interface Anal. 46 (2014), pp. 461–465.
   Google Scholar
• S. Sönmezoğlu and S. Akın, High performance GaAs metal-insulator–semiconductor devices using TiO2 as insulator layer, Curr. Appl Phys. 12 (2012), pp. 1372–1377.10.1016/j.cap.2012.03.030
   Web of Science ®Google Scholar
• Y. Hu and C. Yuan, Low-temperature preparation of photocatalytic TiO2 thin films from anatase sols, J. Cryst. Growth 274 (2005), pp. 563–568. 10.1016/j.jcrysgro.2004.10.146
   Web of Science ®Google Scholar