Temperature dependence of effective stress in severely deformed ultralow-carbon steel

References

• N. Tsuji, S. Okuno, Y. Koizumi, and Y. Minamino, Toughness of ultrafine grained ferritic steels fabricated by ARB and annealing process, Mater. Trans. 45 (2004), pp. 2272–2281.10.2320/matertrans.45.2272
   Web of Science ®Google Scholar
• M. Tanaka, K. Higashida, T. Shimokawa, and T. Morikawa, Brittle-ductile transition in low carbon steel deformed by the accumulative roll bonding process, Mater. Trans. 50 (2009), pp. 56–63.10.2320/matertrans.MD200817
   Web of Science ®Google Scholar
• M. Tanaka, S. Takano, and K. Higashida, Enhancement of low temperature toughness in bulk nanostructured metals, Mater. Trans. 54 (2013), pp. 1624–1628.10.2320/matertrans.MH201319
   Web of Science ®Google Scholar
• X. Huang, N. Hansen, and N. Tsuji, Hardening by annealing and softening by deformation in nanostructured metals, Science 312 (2006), pp. 249–251.10.1126/science.1124268
   PubMed Web of Science ®Google Scholar
• S. Berbenni, V. Favier, and M. Berveiller, Impact of the grain size distribution on the yield stress of heterogeneous materials, Int. J. Plast. 23 (2007), pp. 114–142.10.1016/j.ijplas.2006.03.004
   Web of Science ®Google Scholar
• T. Shimokawa, T. Hiramoto, T. Kinari, and S. Shintaku, Effect of extrinsic grain boundary dislocations on mechanical properties of ultrafine-grained metals by molecular dynamics simulations, Mater. Trans. 50 (2009), pp. 2–10.10.2320/matertrans.MD200810
   Web of Science ®Google Scholar
• R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock, Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels, Mater. Sci. Eng. A 441 (2006), pp. 1–17.10.1016/j.msea.2006.08.095
   Web of Science ®Google Scholar
• T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato, and S. Onaka, Temperature and strain rate dependence of flow stress in severely deformed copper by accumulative roll bonding, Mater. Trans. 50 (2009), pp. 64–69.10.2320/matertrans.MD200809
   Web of Science ®Google Scholar
• Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong, Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process, Scr. Mater. 39 (1998), pp. 1221–1227.10.1016/S1359-6462(98)00302-9
   Web of Science ®Google Scholar
• E.O. Hall, The deformation and ageing of mild steel: III discussion of results, Proc. Phys. Soc. B64 (1951), pp. 747–753.10.1088/0370-1301/64/9/303
   Google Scholar
• N.J. Petch, The cleavage strength of polycrystals, J. Iron Steel Inst. 174 (1953), pp. 25–28.
   Web of Science ®Google Scholar
• A. Seeger, The temperature dependence of the critical shear stress and of work-hardening of metal crystals, London, Edinburgh, Dublin Philos. Mag. J. Sci. 45 (1954), pp. 771–773.10.1080/14786440708520489
   Web of Science ®Google Scholar
• S.K. Mitra and J.E. Dorn, On nature of strain hardening in face-centered cubic metals, Trans. Metall. Soc. AIME 224 (1962), pp. 1062–1071.
   Google Scholar
• J.F.W. Bishop and R. Hill, A theory of the plastic distortion of a polycrystalline aggregate under combined stresses, London, Edinburgh, Dublin Philos. Mag. J. Sci. 42 (1951), pp. 414–427.10.1080/14786445108561065
   Web of Science ®Google Scholar
• M.J. Marcinkowski and H.A. Lipsitt, The plastic deformation of chromium at low temperatures, Acta Metall. 10 (1962), pp. 95–111.10.1016/0001-6160(62)90055-X
   Google Scholar
• J.M. Rosenberg and H.R. Piehler, Calculation of the Taylor factor and lattice rotations for bcc metals deforming by pencil glide, Metall. Trans. 2 (1971), pp. 257–259.10.1007/BF02662666
   Web of Science ®Google Scholar
• U.F. Kocks, Relation between polycrystal deformation and single-crystal deformation, Meta. Trans. 1 (1970), p. 1121.
   Web of Science ®Google Scholar
• Y. Aono and E. Kuramoto, Plastic deformation of high-purity iron single crystals, Rep. Res. Inst. Appl. Mech. Kyushu Univ. XXIX (1981), pp. 127–193.
   Google Scholar
• A.H. Cottrell and R.J. Stokes, Effects of temperature on the plastic properties of aluminium crystals, Proc. Royal Soc. A: Math. Phys. Eng. Sci. 233 (1955), pp. 17–34.10.1098/rspa.1955.0243
   Web of Science ®Google Scholar