Indentation behaviour of superelastic hard carbon

References

• A. Leyland and A. Matthews, Design criteria for wear-resistant nanostructured and glassy-metal coatings, Surf. Coat. Technol. 177–178 (2004), pp. 317–324.10.1016/j.surfcoat.2003.09.011
   Web of Science ®Google Scholar
• C.A. Charitidis, E.P. Koumoulos, and D.A. Dragatogiannis, Nanotribological behavior of carbon based thin films: Friction and lubricity mechanisms at the nanoscale, Lubricants 1 (2013), pp. 22–47.10.3390/lubricants1020022
   Google Scholar
• E.V. Tat’yanin, A.G. Lyapin, V.V. Mukhamadiarov, V.V. Brazhkin, and A.L. Vasiliev, Mechanism of formation of the superhard disordered graphite-like phase from fullerite C60 under pressure, J. Phys.: Condens. Matter 17 (2005), pp. 249–256.
   Web of Science ®Google Scholar
• R.A. Wood, M.H. Lewis, G. West, S.M. Bennington, M.G. Cain, and N. Kitamura, Transmission electron microscopy, electron diffraction and hardness studies of high-pressure and high-temperature treated C60, J. Phys.: Condens. Matter. 12 (2000), pp. 10411–10421.
   Web of Science ®Google Scholar
• A. Dzwilewski, A. Talyzin, G. Bromiley, S. Dub, and L. Dubrovinsky, Characterization of phases synthesized close to the boundary of C60 collapse at high temperature high pressure conditions, Diamond Relat. Mater. 16 (2007), pp. 1550–1556.10.1016/j.diamond.2006.12.040
   Web of Science ®Google Scholar
• O. Chernogorova, I. Potapova, E. Drozdova, V. Sirotinkin, A. Soldatov, A. Vasiliev, and E. Ekimov, Structure and physical properties of nanoclustered graphene synthesized from C60 fullerene under high pressure and high temperature, Appl. Phys. Lett. 104 (2014), pp. 043110-1–043110-4.
   Web of Science ®Google Scholar
• O.P. Tchernogorova, O.A. Bannykh, V.M. Blinov, E.I. Drozdova, A.A. Dityat’ev, and N.N. Mel’nik, Superhard carbon particles forming from fullerites in a mixture with iron powder, Mater. Sci. Eng. A 299 (2001), pp. 136–140.10.1016/S0921-5093(00)01400-3
   Web of Science ®Google Scholar
• O. Chernogorova, E. Drozdova, I. Ovchinnikova, A.V. Soldatov, and E. Ekimov, Structure and properties of superelastic hard carbon phase created in fullerene-metal composites by high temperature-high pressure treatment, J. Appl. Phys. 111 (2012), pp. 112601-1–112601-5.
   Web of Science ®Google Scholar
• M. Kozlov, M. Hirabayashi, K. Nozaki, M. Tokumoto, and H. Ihara, Superhard form of carbon obtained from C60 at moderate pressure, Synth. Met. 70 (1995), pp. 1411–1412.10.1016/0379-6779(94)02900-J
   Web of Science ®Google Scholar
• A.G. Lyapin, V.V. Brazhkin, E.L. Gromnitskaya, S.V. Popova, O.V. Stal’gorova, and R.N. Voloshin, Hardening of fullerite C60 during temperature-induced polymerization and amorphization under pressure, Appl. Phys. Lett. 76 (2000), pp. 712–714.10.1063/1.125870
   Web of Science ®Google Scholar
• V. Blank, M. Popov, G. Pivovarov, N. Lvova, K. Gogolinsky, and V. Reshetov, Ultrahard and superhard phases of fullerite C60: Comparison with diamond on hardness and wear, Diamond Relat. Mater. 7 (1998), pp. 427–431.10.1016/S0925-9635(97)00232-X
   Web of Science ®Google Scholar
• M. Popov, V. Blank, S. Perfilov, D. Ovsyannikov, B. Kulnitskiy, E. Tyukalova, V. Prokhorov, I. Maslenikov, I. Perezhogin, E. Skryleva, and Yu Parkhomenko, Unique mechanical properties of fullerite derivatives synthesized with a catalytic polymerization reaction, MRS Commun. 5 (2015), pp. 71–75.10.1557/mrc.2015.4
   Web of Science ®Google Scholar
• S.I. Bulychev and V.P. Alekhin, Method of kinetic hardness and microhardness in testing impression by an indentor, Zavod. Lab. 11 (1987), pp. 76–79.
   Google Scholar
• W.C. Oliver and G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res. 7 (1992), pp. 1564–1583.10.1557/JMR.1992.1564
   Web of Science ®Google Scholar
• A.V. Talyzin, L.S. Dubrovinsky, and U. Jansson, In situ Raman study of C60 thin films at high pressures, Phys. Rev. B: Condens. Matter. 64 (2001), pp. 113408-1–113408-4.
   Web of Science ®Google Scholar
• ISO 14577-1, Metallic Materials – Instrumented indentation test for hardness and materials parameters – Part 1: Test method, ISO Central Secretariat, Geneva, Switzerland (2002).
   Google Scholar
• E.A. Ekimov, R.A. Sadykov, S. Gierlotka, A. Presz, E.V. Tatyanin, V.N. Slesarev, and N.N. Kuzin, A high-pressure cell for high-temperature experiments in a toroid-type chamber, Instrum. Exp. Tech. 47 (2004), pp. 276–278.10.1023/B:INET.0000025217.65076.fc
   Web of Science ®Google Scholar
• C. Lepoittevin, M. Álvarez-Murga, L. Marques, M. Mezouar, and J.L. Hodeau, Structural characterization of corrugated anisotropic graphene-based carbons obtained from the collapse of 2D C60 polymers, Carbon 52 (2013), pp. 278–287.10.1016/j.carbon.2012.09.029
   Web of Science ®Google Scholar
• B.R. Lawn and R.F. Cook, Probing material properties with sharp indenters: A retrospective, J. Mat. Sci. 47 (2012), pp. 1–22.10.1007/s10853-011-5865-1
   Google Scholar