SEM/EDS investigation of one-step flame sprayed and fused Ni-based self-fluxing alloy coatings on steel substrates

References

• Z. Bergant and J. Grum, Quality improvement of flame sprayed, heat treated, and remelted NiCrBSi coatings, J. Therm. Spray Technol. 18 (2009), pp. 380–391.10.1007/s11666-009-9304-7
   Web of Science ®Google Scholar
• J.P. Tu, M.S. Liu, and Z.Y. Mao, Erosion resistance of Ni-WC self-fluxing alloy coating at high temperature, Wear 209 (1997), pp. 43–48.10.1016/S0043-1648(96)07457-1
   Web of Science ®Google Scholar
• M.P. Planche, H. Liao, B. Normand, and C. Coddet, Relationships between NiCrBSi particle characteristics and corresponding coating properties using different thermal spraying processes, Surf. Coat. Technol. 200 (2005), pp. 2465–2473.10.1016/j.surfcoat.2004.08.224
   Web of Science ®Google Scholar
• A. Sue, H. Sreshta, and B.H. Qiu, Improved hardfacing for drill bits and drilling tools, J. Therm. Spray Technol. 20 (2011), pp. 372–377.10.1007/s11666-010-9569-x
   Web of Science ®Google Scholar
• K. Simunovic, T. Saric, and G. Simunovic, Different approaches to the investigation and testing of the Ni-based self-fluxing alloy coatings-A review. Part 1: General facts, wear and corrosion investigations, Tribol. Trans. 57 (2014), pp. 955–979.10.1080/10402004.2014.927547
   Web of Science ®Google Scholar
• K. Simunovic, T. Saric, and G. Simunovic, Different approaches to the investigation and testing of the Ni-based self-fluxing alloy coatings-A review. Part 2: Microstructure, adhesive strength, cracking behavior, and residual stresses investigations, Tribol. Trans. 57 (2014), pp. 980–1000.10.1080/10402004.2014.927548
   Web of Science ®Google Scholar
• D. Chaliampalias, G. Vourlias, E. Pavlidou, S. Skolianos, K. Chrissafis, and G. Stergioudis, Comparative examination of the microstructure and high temperature oxidation performance of NiCrBSi flame sprayed and pack cementation coatings, Appl. Surf. Sci. 255 (2009), pp. 3605–3612.10.1016/j.apsusc.2008.10.006
   Web of Science ®Google Scholar
• Z. Bergant, U. Trdan, and J. Grum, Effect of high-temperature furnace treatment on the microstructure and corrosion behavior of NiCrBSi flame-sprayed coatings, Corros. Sci. 88 (2014), pp. 372–386.10.1016/j.corsci.2014.07.057
   Web of Science ®Google Scholar
• T. Gómez-del Río, M.A. Garrido, J.E. Fernández, M. Cadenas, and J. Rodríguez, Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings, J. Mater. Process. Technol. 204 (2008), pp. 304–312.10.1016/j.jmatprotec.2007.11.042
   Web of Science ®Google Scholar
• Z. Zhang, Z. Wang, B. Liang, H.B. Dong, and S.V. Hainsworth, Effect of CeO2 on the microstructure and wear behavior of thermal spray welded NiCrWRE coatings, Wear 262 (2007), pp. 562–567.10.1016/j.wear.2006.07.002
   Web of Science ®Google Scholar
• R. González, M.A. García, I. Peñuelas, M. Cadenas, M.D. Fernández, A.H. Battez, and D. Felgueroso, Microstructural study of NiCrBSi coatings obtained by different processes, Wear 263 (2007), pp. 619–624.10.1016/j.wear.2007.01.094
   Web of Science ®Google Scholar
• B.M. Dhakar, D.K. Dwivedi, and S.P. Sharma, Studies on remelting of tungsten carbide and rare earth modified nickel base alloy composite coating, Surf. Eng. 28 (2012), pp. 73–80.10.1179/1743294411Y.0000000051
   Web of Science ®Google Scholar
• S. Harsha, D.K. Dwivedi, and A. Agarwal, Performance of flame sprayed Ni-WC coating under abrasive wear conditions, J. Mater. Eng. Perform. 17 (2008), pp. 104–110.10.1007/s11665-007-9123-2
   Web of Science ®Google Scholar
• K. Simunovic, I. Kladaric, and D. Krumes, Investigation of substrate microstructure after flame spraying and fusing, Strojarstvo 50 (2008), pp. 213–220.
   Web of Science ®Google Scholar
• J. Suutala, J. Tuominen, and P. Vuoristo, Laser-assisted spraying and laser treatment of thermally sprayed coatings, Surf. Coat. Technol. 201 (2006), pp. 1981–1987.10.1016/j.surfcoat.2006.04.042
   Web of Science ®Google Scholar
• Z. Zhang, Z. Wang, and B. Liang, Microstructure and dry-sliding wear behavior of thermal sprayed and fused Ni-based coatings with the addition of La2O3, Tribol. Lett. 37 (2010), pp. 141–148.10.1007/s11249-009-9502-y
   Web of Science ®Google Scholar
• L. Gil and M.H. Staia, Microstructure and properties of HVOF thermal sprayed NiCrWBSi coatings, Surf. Coat. Technol. 120–121 (1999), pp. 423–429.10.1016/S0257-8972(99)00494-6
   Web of Science ®Google Scholar
• L. Gil and M.H. Staia, Influence of HVOF parameters on the corrosion resistance of NiCrWBSi coatings, Thin Solid Films 420–421 (2002), pp. 446–454.10.1016/S0040-6090(02)00815-5
   Web of Science ®Google Scholar
• Castolin Eutectic Global Coating Technology. Available at https://www.castolin.com/sites/default/files/product/downloads//Global-Coating-Catalogue-2014.pdf (assessed on 25 August 2016).
   Google Scholar
• Technical Data Book. Available at http://www.ngoclinh.net.vn/sites/1637/upload/documents/2007_eutectic_data_book.pdf (assessed on 25 August 2016).
   Google Scholar
• N.Y. Sari and M. Yilmaz, Improvement of wear resistance of wire drawing rolls with Cr-Ni-B-Si+WC thermal spraying powders, Surf. Coat. Technol. 202 (2008), pp. 3136–3141.10.1016/j.surfcoat.2007.11.022
   Web of Science ®Google Scholar
• J. Voyer and H. Kreye, Determination of cracking resistance of thermal spray coatings during four-point bend testing using an acoustic emission technique, J. Therm. Spray Technol. 12 (2003), pp. 416–426.10.1361/105996303770348285
   Web of Science ®Google Scholar
• S. Houdková, E. Smazalová, M. Vostřák, and J. Schubert, Properties of NiCrBSi coating, as sprayed and remelted by different technologies, Surf. Coat. Technol. 253 (2014), pp. 14–26.10.1016/j.surfcoat.2014.05.009
   Web of Science ®Google Scholar