Influence of Al₃Ni crystallisation origin particles on hot deformation behaviour of aluminium based alloys

References

• B. Li, Q. Pan, Z. Zhang, and C. Li, Characterization of flow behavior and microstructural evolution of Al–Zn–Mg–Sc–Zr alloy using processing maps, Mater. Sci. Eng. A 556 (2012), pp. 844–848.10.1016/j.msea.2012.07.078
   Web of Science ®Google Scholar
• S. Chen, K. Chen, G. Peng, X. Chen, and Q. Ceng, Effect of heat treatment on hot deformation behavior and microstructure evolution of 7085 aluminum alloy, J. Alloys Compd. 537 (2012), pp. 338–345.10.1016/j.jallcom.2012.05.052
   Web of Science ®Google Scholar
• N. Jin, H. Zhang, Y. Han, W. Wu, and J. Chen, Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature, Mater. Charact. 60 (2009), pp. 530–536.10.1016/j.matchar.2008.12.012
   Web of Science ®Google Scholar
• Z. Hui, J. Neng-ping, and C. Jiang-hua, Hot deformation behavior of Al–Zn–Mg–Cu–Zr aluminum alloys during compression at elevated temperature, Trans. Nonferrous Met. Soc. China 21 (2011), pp. 437–442.
   Web of Science ®Google Scholar
• B. Li, Q. Pan, and Z. Yin, Microstructural evolution and constitutive relationship of Al–Zn–Mg alloy containing small amount of Sc and Zr during hot deformation based on Arrhenius-type and artificial neural network models, J. Alloys Compd. 584 (2014), pp. 406–416.10.1016/j.jallcom.2013.09.036
   Web of Science ®Google Scholar
• Y.C. Lin, L.T. Li, and Y.Q. Jiang, A phenomenological constitutive model for describing thermo-viscoplastic behavior of Al–Zn–Mg–Cu alloy under hot working condition, Exp. Mech. 52 (2012), pp. 993–1002.10.1007/s11340-011-9546-4
   Web of Science ®Google Scholar
• L.M.Yan, J. Shen, J.P. Li, Z.P. Li, and X.D. Yan, Deformation behavior and microstructure of an Al–Zn–Mg–Cu–Zr alloy during hot deformation, Int. J. Minerals, Metall. Mater.. 17 1 (2010), pp. 46–52.10.1007/s12613-010-0108-z
   Web of Science ®Google Scholar
• B. Wu, M.Q. Li, and D.W. Ma, The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy, Mater. Sci. Eng. A 542 (2012), pp. 79–87.10.1016/j.msea.2012.02.035
   Web of Science ®Google Scholar
• L. Shi, H. Yang, L.G. Guo, and J. Zhang, Constitutive modeling of deformation in high temperature of a forging 6005A aluminum alloy, Mater. Des. 54 (2014), pp. 576–581.10.1016/j.matdes.2013.08.037
   Web of Science ®Google Scholar
• Y.N. Kwon, Y.S. Lee, and J.H. Lee, Deformation behavior of Al–Mg–Si alloy at the elevated temperature, J. Mater. Process. Technol. 187–188 (2007), pp. 533–536.10.1016/j.jmatprotec.2006.11.207
   Web of Science ®Google Scholar
• H. Zhang, L. Li, D. Yuan, and D. Peng, Hot deformation behavior of the new Al–Mg–Si–Cu aluminum alloy during compression at elevated temperatures, Mater. Charact. 58 (2007), pp. 168–173.10.1016/j.matchar.2006.04.012
   Web of Science ®Google Scholar
• F. Jiang, H. Zhang, X. Ji, X. Meng, and L. Li, Comparative hot deformation characters of Al–Mn–Mg–RE alloy and Al–Mn–Mg–RE–Ti alloy, Mater. Sci. Eng. A 595 (2014), pp. 10–17.10.1016/j.msea.2013.12.004
   Web of Science ®Google Scholar
• A. Alankar and M.A. Wells, Constitutive behavior of as-cast aluminum alloys AA3104, AA5182 and AA6111 at below solidus temperatures, Mater. Sci. Eng. A 527 (2010), pp. 7812–7820.10.1016/j.msea.2010.08.056
   Web of Science ®Google Scholar
• T. Zhang, Y. Tao, and X. Wang, Constitutive behavior, microstructural evolution and processing map of extruded Al–1.1Mn–0.3Mg–0.25RE alloy during hot compression, Trans. Nonferrous Met. Soc. China 24 (2014), pp. 1337–1345.10.1016/S1003-6326(14)63197-6
   Web of Science ®Google Scholar
• X.-M. Zhang, M. Xu, J.-G. Tang, and J. Ou, Hot-compression behavior of Al–1Mn–1Mg alloy, J. Cent. South Univ. Technol. 17 (2010), pp. 425–430.10.1007/s11771-010-0501-9
   Web of Science ®Google Scholar
• J.-G. Tang, X.-X. Huang, and X.-M. Zhang, Hot-compression behavior of Al alloy 5182, J. Cent. South Univ. 19 (2012), pp. 2073–2080.10.1007/s11771-012-1247-3
   Web of Science ®Google Scholar
• W.M. Van Haaften, B. Magnin, W.H. Kool, and L. Katgerman, Constitutive behavior of as-cast AA1050, AA3104, and AA5182, Metall. Mater. Trans. A 33 (2002), pp. 1971–1980.10.1007/s11661-002-0030-8
   Web of Science ®Google Scholar
• AYu Churyumov, A.I. Bazlov, A.A. Tsar’kov, and A.V. Mikhaylovskaya, Study of the structure and properties of a wrought Al–Mg–Mn aluminum alloy on a Gleeble 3800 simulator designed for physical modeling of thermomechanical processes, Metallurgist 56 (2012), pp. 618–623.10.1007/s11015-012-9624-6
   Web of Science ®Google Scholar
• G. Xu, X. Peng, X. Liang, X. Li, and Z. Yin, Constitutive relationship for high temperature deformation of Al–3Cu–05Sc alloy, Trans. Nonferrous Met. Soc. China 23 (2013), pp. 1549–1555.10.1016/S1003-6326(13)62629-1
   Web of Science ®Google Scholar
• J. Zhang, B. Chen, and Z. Baoxiang, Effect of initial microstructure on the hot compression deformation behavior of a 2219 aluminum alloy, Mater. Des. 34 (2012), pp. 15–21.10.1016/j.matdes.2011.07.061
   Web of Science ®Google Scholar
• X.Y. Liu, Q.L. Pan, Y.B. He, W.B. Li, W.J. Liang, and Z.M. Yin, Flow behavior and microstructural evolution of Al–Cu–Mg–Ag alloy during hot compression deformation, Mater. Sci. Eng. A 500 (2009), pp. 150–154.10.1016/j.msea.2008.09.028
   Web of Science ®Google Scholar
• S. Banerjee, P.S. Robi, and A. Srinivasan, Prediction of hot deformation behavior of Al–5.9%Cu–0.5%Mg alloys with trace additions of Sn, J. Mater. Sci. 47 (2012), pp. 929–948.10.1007/s10853-011-5873-1
   Web of Science ®Google Scholar
• S.M. Miresmaeili and B. Nami, Impression creep behavior of Al–1.9%Ni–1.6%Mn–1%Mg alloy, Mater. Des. 56 (2014), pp. 286–290.10.1016/j.matdes.2013.11.011
   Web of Science ®Google Scholar
• N.A. Belov, A.A. Aksenov, and D.G. Eskin, Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys, Elsevier, Amsterdam, 2005.
   Google Scholar
• N.A. Belov, Quantitative phase analysis of the Al-Zn-Mg-Cu-Ni phase diagram in the region of compositions of high-strength nickalines, Russ. J. Non-Ferrous Met. 51 (2010), pp. 243–249.10.3103/S1067821210030090
   Web of Science ®Google Scholar
• A.V. Mikhaylovskaya, M.A. Ryazantseva, and V.K. Portnoy, Effect of eutectic particles on the grain size control and the superplasticity of aluminium alloys, Mater. Sci. Eng. A 528 (2011), pp. 7306–7309.10.1016/j.msea.2011.06.042
   Web of Science ®Google Scholar
• A.V. Mikhaylovskaya and V.K. Portnoy, Superplasticity of the aluminum alloys containing the Al3Ni eutectic particles, Materialwiss. Werkstofftech. 43 (2012), pp. 772–775.10.1002/mawe.201200039
   Web of Science ®Google Scholar
• L.F. Mondolfo, Aluminum Alloys: Structure and Properties, Butterworths, London, 1976.
   Google Scholar
• F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, 1995.
   Google Scholar
• H.E. Vante, R. Shahani, and E. Nes, Deformation of cube-oriented grains and formation of recrystallized cube grains in a hot deformed commercial AlMgMn aluminium alloy, Acta Mater. 44 (1996), pp. 4447–4462.
   Web of Science ®Google Scholar
• R.A. Vandermeer and D. Juul Jensen, Recrystallization in hot vs cold deformed commercial aluminum: A microstructure path comparison, Acta Mater. 51 (2003), pp. 3005–3018.
   Web of Science ®Google Scholar
• N.A. Belov, A.A. Aksenov, and V.S. Zolotorevskij, Patent No. US7604772B2, 2009.
   Google Scholar
• N.A. Belov, Quantitative phase analysis of the Al–Zn–Mg–Cu–Ni phase diagram in the region of compositions of high strength nickalines, Russ. J. Non-Ferrous Met.. 51 (2010), pp. 243–249.10.3103/S1067821210030090
   Web of Science ®Google Scholar
• N.A. Belov and V.S. Zolotorevskiy, The Effect of Nickel on the Structure, Mechanical and Casting Properties of Aluminium Alloy of 7075 Type, Mater. Sci. Forum 396–402 (2002), pp. 935–940.10.4028/www.scientific.net/MSF.396-402
   Google Scholar
• A.V. Mikhaylovskaya, A.D. Kotov, A.V. Pozdniakov, and V.K. Portnoy, A high-strength aluminium-based alloy with advanced superplasticity, J. Alloys Compd. 599 (2014), pp. 139–144.10.1016/j.jallcom.2014.02.061
   Web of Science ®Google Scholar
• A.V. Mikhaylovskaya, O.A. Yakovtseva, V.V. Cheverikin, A.D. Kotov, and V.K. Portnoy, Superplastic behaviour of Al–Mg–Zn–Zr–Sc-based alloys at high strain rates, Mater. Sci. Eng A 659 (2016), pp. 225–233.10.1016/j.msea.2016.02.061
   Web of Science ®Google Scholar
• A.D. Kotov, A.V. Mikhaylovskaya, M.S. Kishchik, A.A. Tsarkov, S.A. Aksenov, and V.K. Portnoy, Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment, J. Alloys Compd. 688 (2016), pp. 336–344.10.1016/j.jallcom.2016.07.045
   Web of Science ®Google Scholar
• A.V. Mikhaylovskaya, A.D. Kotov, V.S. Levchenko, and V.K. Portnoy, The study of the technology parameters on the superplasticity of the new Al–Zn–Mg–Cu–Ni–Zr base alloy, Materialwiss. Werkstofftech. 45 (2014), pp. 822–827.10.1002/mawe.v45.9
   Web of Science ®Google Scholar
• A.V. Mikhaylovskaya and V.K. Portnoy, Analysis of the softening of heterophase aluminum alloys with a eutectic component, Russ. J. Non-Ferrous Met. 53 (2012), pp. 386–391.10.3103/S1067821212050082
   Web of Science ®Google Scholar
• A.V. Mikhaylovskaya, A.D. Kotov, AYu Churyumov, and V.K. Portnoy, Analysis of softening alloys of the Al–Ni system containing particles of variable dispersity, Russ. J. Non-Ferrous Met. 53 (2012), pp. 457–464.10.3103/S1067821212060077
   Web of Science ®Google Scholar
• AYu Churyumov, M.G. Khomutov, A.A. Tsar’kov, A.V. Pozdnyakov, A.N. Solonin, V.M. Efimov, and E.L. Mukhanov, Study of the structure and mechanical properties of corrosion-resistant steel with a high concentration of boron at elevated temperatures, Phys. Met. Metall. 115 (2014), pp. 809–813.10.1134/S0031918X14080031
   Web of Science ®Google Scholar
• R.W. Evans and P.J. Scharning, Axisymmetric compression test and hot working properties of alloys, Mater. Sci. Technol. 17 (2001), pp. 995–1004.10.1179/026708301101510843
   Web of Science ®Google Scholar
• J. Zhou, L. Qi, and G. Chen, New inverse method for identification of constitutive parameters, Trans. Nonferrous Met. Soc. China 16 (2006), pp. 148–152.10.1016/S1003-6326(06)60026-5
   Web of Science ®Google Scholar
• C.J. Bennett, S.B. Leen, E.J. Williams, P.H. Shipway, and T.H. Hyde, A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing, Comput. Mater. Sci. 50 (2010), pp. 125–137.10.1016/j.commatsci.2010.07.016
   Web of Science ®Google Scholar
• E.N. Chumachenko, A.V. Semyanistyj, and N.N. Grunin, Automatized designing of isothermal forging technological processes on the base of programed complex ‘SPLEN’, Kuznechno-Shtampovochnoe Proizvodstvo 2 (1993), pp. 13–15.
   Google Scholar
• E.N. Chumachenko, I.V. Logashina, and S.A. Aksenov, Simulation modeling of rolling in passes, Metallurgist 50 (2006), pp. 413–418.10.1007/s11015-006-0099-1
   Web of Science ®Google Scholar
• S.Aksenov, Y. Puzino, and I. Mazur, Inverse analysis of plane strain and uniaxial compression tests performed on Gleeble, METAL 2015 – Conference Proceedings, 23rd International Conference on Metallurgy and Materials, Brno, Czech Republic, 2015, pp. 170–176.
   Google Scholar
• S.A. Aksenov, J. Kliber, Y.A. Puzino, and S.A. Bober, Processing of plane strain compression test results for investigation of AISI-304 stainless steel constitutive behaviour, J. Chem. Technol. Metall. 50 (2015), pp. 644–650.
   Google Scholar
• A. Deschamps and Y. Brechet, Influence of predeformation and ageing of an Al–Zn–Mg alloy-II. Modeling of precipitation kinetics and yield stress, Acta Mater. 47 (1999), pp. 293–305.
   Web of Science ®Google Scholar
• M.J. Starink, P. Wang, I. Sinclair, and P.J. Gregson, Microstrucure and strengthening of Al–Li–Cu–Mg alloys and MMCs: II. Modelling of yield strength, Acta Mater. 47 (1999), pp. 3855–3868.
   Web of Science ®Google Scholar
• E.Orowan, The creep of metals. J. West Scotland Iron Steel Inst. 54 (1946–1947), pp. 45–59.
   Google Scholar
• P.M. Kelly, Progress report on recent advances in physical metallurgy: (C) The quantitative relationship between microstructure and properties in two-phase alloys, Int. Mater. Rev. 18 (1973), pp. 31–36.10.1179/imr.1973.18.1.31
   Google Scholar
• M.V. Zaharov and A.M. Zaharov, Superalloys, Metallurgia, Moscow, 1972 (in russian).
   Google Scholar
• J.W. Martin, Micromechanisms in Particle-hardened Alloys, Cambridge University Press, Cambridge, 1980.
   Google Scholar
• O. Engler, L. Löchte, and J. Hirsch, Through-process simulation of texture and properties during the thermomechanical processing of aluminium sheets, Acta Mater. 55 (2007), pp. 5449–5463.10.1016/j.actamat.2007.06.010
   Web of Science ®Google Scholar
• J.-P. Poirier, Creep of Crystals: High-temperature Deformation Processes in Metals, Ceramics and Minerals, Cambridge University Press, Cambridge, 1985.10.1017/CBO9780511564451
   Google Scholar
• F.J. Humphreys, A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures – II. The effect of second-phase particles, Acta Mater. 45 (1997), pp. 5031–5039.
   Web of Science ®Google Scholar
• T.C. Schulthess, P.E.A. Turchi, A. Gonis, and T.G. Nieh, Systematic study of stacking fault energies of random Al-based alloys, Acta Mater. 46 (1998), pp. 2215–2221.10.1016/S1359-6454(97)00432-1
   Web of Science ®Google Scholar
• NYu Zolotorevsky, A.N. Solonin, AYu Churyumov, and V.S. Zolotorevsky, Study of work hardening of quenched and naturally aged Al–Mg and Al–Cu alloys, Mater. Sci. Eng. A 502 (2009), pp. 111–117.10.1016/j.msea.2008.10.010
   Web of Science ®Google Scholar
• F.J. Humphreys, Recrystallization mechanisms in two-phase alloys, Met. Sci. 13 (1979), pp. 136–145.10.1179/msc.1979.13.3-4.136
   Google Scholar
• F.J. Humphreys, Particle stimulated nucleation of recrystallization at silica particles in nickel, Scr. Mater. 43 (2000), pp. 591–596.10.1016/S1359-6462(00)00442-5
   Web of Science ®Google Scholar
• H. Mirzadeh, A simplified approach for developing constitutive equations for modeling and prediction of hot deformation flow stress, Metall. Mater. Trans. A 46 (2015), pp. 4027–4037.10.1007/s11661-015-3006-1
   Web of Science ®Google Scholar
• H. Mirzadeh, Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions, Mech. Mater. 85 (2015), pp. 66–79.10.1016/j.mechmat.2015.02.014
   Web of Science ®Google Scholar
• C. Zener and J.H. Hollomon, Effect of strain rate upon plastic flow of steel, J. Appl. Phys. 15 (1944), pp. 22–32.10.1063/1.1707363
   Google Scholar
• G. Quan, G. Li, T. Chen, Y. Wang, Y. Zhang, and J. Zhou, Dynamic recrystallization kinetics of 42CrMo steel during compression at different temperatures and strain rates, Mater. Sci. Eng. A 528 (2011), pp. 4643–4651.10.1016/j.msea.2011.02.090
   Web of Science ®Google Scholar
• J. van de Langkruis, W.H. Kool, and S. van der Zwaag, Assessment of constitutive equations in modelling the hot deformability of some overaged Al–Mg–Si alloys with varying solute contents, Mater. Sci. Eng. A 266 (1999), pp. 135–145.10.1016/S0921-5093(99)00046-5
   Web of Science ®Google Scholar
• S. Serajzadeh, A mathematical model for evolution of flow stress during hot deformation, Mater. Lett. 59 (2005), pp. 3319–3324.10.1016/j.matlet.2005.05.065
   Web of Science ®Google Scholar
• J.R. Cho, W.B. Bae, W.J. Hwang, and P. Hartley, A study on the hot-deformation behavior and dynamic recrystallization of Al–5 wt.%Mg alloy, J. Mater. Process. Technol. 118 (2001), pp. 356–361.10.1016/S0924-0136(01)00978-5
   Web of Science ®Google Scholar
• H. Mirzadeh and A. Najafizadeh, Flow stress prediction at hot working conditions, Mater. Sci. Eng. A 527 (2010), pp. 1160–1164.10.1016/j.msea.2009.09.060
   Web of Science ®Google Scholar
• K.B. Hyde and P.S. Bate, Dynamic grain growth in Al–6Ni: Modelling and experiments, Acta Mater. 53 (2005), pp. 4313–4321.10.1016/j.actamat.2005.05.029
   Web of Science ®Google Scholar
• C.M. Sellars and W.J. McTegart, On the mechanism of hot deformation, Acta Metall. 14 (1966), pp. 1136–1138.10.1016/0001-6160(66)90207-0
   Google Scholar
• C.J. Smithells, Metals Reference Book, Butterworths, London, 1967.
   Google Scholar
• F.J. Humphreys and P.N. Kalu, Dislocation-particle interactions during high temperature deformation of two-phase aluminium alloys, Acta Metall. 35 (1987), pp. 2815–2829.10.1016/0001-6160(87)90281-1
   Google Scholar
• H. Mirzadeh, M. Roostaei, M.H. Parsa, and R. Mahmudi, Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning, Mater. Des. 68 (2015), pp. 228–231.10.1016/j.matdes.2014.12.020
   Web of Science ®Google Scholar
• M. Roostaei, M.H. Parsa, R. Mahmudi, and H. Mirzadeh, Hot compression behavior of GZ31 magnesium alloy, J. Alloys Compd. 631 (2015), pp. 1–6.10.1016/j.jallcom.2014.11.188
   Web of Science ®Google Scholar
• M. Shakiba, N. Parson, and X.-G. Chen, Hot deformation behavior and rate-controlling mechanism in dilute Al–Fe–Si alloys with minor additions of Mn and Cu, Mater. Sci. Eng. A 636 (2015), pp. 572–581.10.1016/j.msea.2015.04.029
   Web of Science ®Google Scholar
• D.H. Bae and A.K. Ghosh, Grain size and temperature dependence of superplastic deformation in an Al–Mg alloy under isostructural condition, Acta Mater. 48 (2000), pp. 1207–1224.10.1016/S1359-6454(99)00445-0
   Web of Science ®Google Scholar