The heat treatment response of semisolid formed Al–5Fe–4Cu alloy

References

• X.G. Yuan, S.H. Zhang, B. Liu, and H.J. Huang, Compression deformation behavior of Al–Fe alloy in semi-solid state, J. Mech. Eng. 46 (2010), pp. 85–90. (in Chinese).10.3901/JME.2010.18.085
   Google Scholar
• X.G. Yuan, S.G. Zhao, S. Li, Y.J. Lu, and H.J. Huang, Microstructure and properties of semi-solid extruded Al–Si-Fe alloy, Foundry 55 (2006), pp. 466–468. (in Chinese).
   Google Scholar
• B. Liu, X.G. Yuan, and H.J. Huang, Microstructure and mechanical properties of hypereutectic Al–Fe alloys prepared by semi-solid formation, Chin. Foundry 8 (2011), pp. 424–431. Available at www.foundryworld.com/english/foundry/old.asp?types=6&leib=2&Years=2011&months=4.
   Web of Science ®Google Scholar
• B. Liu, X.G. Yuan, S.H. Zhang, and H.J. Huang, Microstructure evolution of Al–Fe alloy in semi-solid compression deformation, J. Plast. Eng. 16 (2009), pp. 11–17. (in Chinese).
   Google Scholar
• D. Liu, H.V. Atkinson, and P. Kapranos, Effect of heat treatment on properties of thixoformed high performance 2014 and 201 aluminium alloys, J. Mater. Sci. 39 (2004), pp. 99–105.10.1023/B:JMSC.0000007732.04363.81
   Web of Science ®Google Scholar
• Y. Birol, Response to T6 heat treatment of extruded and thixoformed EN AW 2014 alloys, Mater. Sci. Eng. A 528 (2011), pp. 5636–5641.10.1016/j.msea.2011.03.101
   Web of Science ®Google Scholar
• Y. Birol, Thixoforming of EN AW-2014 alloy at high solid fraction, J. Mater. Proce. Techn. 211 (2011), pp. 1749–1756.10.1016/j.jmatprotec.2011.05.016
   Web of Science ®Google Scholar
• E.M. Elgallad and X.G. Chen, On the microstructure and solution treatment of hot tearing resistant semi-solid 206 alloy, Mater. Sci. Eng. A 556 (2012), pp. 783–788.10.1016/j.msea.2012.07.064
   Web of Science ®Google Scholar
• E. Cerri, E. Evangelista, S. Spigarelli, P. Cavaliere, and F. DeRiccardis, Effects of thermal treatments on microstructure and mechanical properties in a thixocast 319 aluminum alloy, Mater. Sci. Eng. A 284 (2000), pp. 254–260.10.1016/S0921-5093(00)00748-6
   Web of Science ®Google Scholar
• M.S. Salleh, M.Z. Omar, J. Syarif, K.S. Alhawari, and M.N. Mohammed, Microstructure and mechanical properties of thixoformed A319 aluminium alloy, Mater. Des. 64 (2014), pp. 142–152.10.1016/j.matdes.2014.07.014
   Web of Science ®Google Scholar
• P. Cavaliere, E. Cerri, and P. Leo, Effect of heat treatments on mechanical properties and fracture behavior of a thixocast A356 aluminum alloy, J. Mater. Sci. 39 (2004), pp. 1653–1658.10.1023/B:JMSC.0000016165.99666.dd
   Web of Science ®Google Scholar
• S. Menargues, E. Martín, M.T. Baile, and J.A. Picas, New short T6 heat treatments for aluminium silicon alloys obtained by semisolid forming, Mater. Sci. Eng. A 621 (2015), pp. 236–242.10.1016/j.msea.2014.10.078
   Web of Science ®Google Scholar
• N. Mahathaninwong, T. Plookphol, J. Wannasin, and S. Wisutmethangoon, T6 heat treatment of rheocasting 7075 Al alloy, Mater. Sci. Eng. A 532 (2012), pp. 91–99.10.1016/j.msea.2011.10.068
   Web of Science ®Google Scholar
• U.A. Curle, Semi-solid near-net shape rheocasting of heat treatable wrought aluminum alloys, Trans. Nonferrous Met. Soc. China 20 (2010), pp. 1719–1724.10.1016/S1003-6326(09)60364-2
   Web of Science ®Google Scholar
• J.J. Feng, X.G. Yuan, R.X. Li, and B. Liu, Effects of heat treatment on microstructure and properties of semi-solid extruded Al–Fe based alloy, Spec. Cast. Nonferrous Alloys 29 (2009), pp. 425–427. (in Chinese).
   Google Scholar
• R.X. Li, Q. Li, G.Q. Ren, Y.J. Tong, B.Y. Yu, and X.G. Yuan, Abnormal mechanical property evolution induced by heat treatment for a semi-solid forming hypereutectic Al–Fe base alloy, China Foundry 12 (2015), pp. 208–213.
   Web of Science ®Google Scholar
• H. Möller, G. Govender, W.E. Stumpf, and P.C. Pistorius, Comparison of heat treatment response of semisolid metal processed alloys A356 and F357, Int. J. Cast. Met. Res. 23(1) (2010), pp. 37–43.10.1179/174313309X451252
   Web of Science ®Google Scholar
• R.X. Li, X.Y. Luan, Q. Li, Z. Liu, C.X. Li, and X.G. Yuan, Effect of heat treatment on microstructure and properties of as-cast hypereutectic Al–Fe based alloy, The 12th China Foundry Conference, Guangzhou, China, 2011, pp. 360–365. (in Chinese).
   Google Scholar
• B. Liu, The segregation behavior of alloying elements in the Al–5Fe based alloys during the semisolid deformation, JOM 67 (2015), pp. 3030–3039.
   Web of Science ®Google Scholar
• W.W. Zhang, B. Lin, J.L. Fan, D.T. Zhang, and Y.Y. Li, Microstructures and mechanical properties of heat-treated Al–5.0Cu–0.5Fe squeeze cast alloys with different Mn/Fe ratio, Mater. Sci. Eng. A 588 (2013), pp. 366–375.10.1016/j.msea.2013.09.043
   Web of Science ®Google Scholar
• S.W. Han, Transformation of α-Al(Fe,Mn)Si in Al–7Si–0.4Mg cast alloys after solution heat treatment, Met. Mater. Int. 19 (2013), pp. 1–4.10.1007/s12540-013-1001-x
   Web of Science ®Google Scholar
• S.P. Ringer and K. Hono, Microstructural Evolution and Age Hardening in Aluminium Alloys, Mater. Charact. 44 (2000), pp. 101–131.10.1016/S1044-5803(99)00051-0
   Web of Science ®Google Scholar