Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling

References

• L.B. Wang, K.Y. See, Y. Ling, and W.J. Koh, Study of metal foams for architectural electromagnetic shielding, J. Mater. Civil Eng. 24 (2012), pp. 488–493.10.1061/(ASCE)MT.1943-5533.0000403
   Web of Science ®Google Scholar
• B. Zhang and T.N. Chen, Calculation of sound absorption characteristics of porous sintered fiber metal, J. Appl. Acoustics 70 (2008), pp. 337–346.
   Web of Science ®Google Scholar
• M. Hakamada, T. Kuromura, Y. Chen, H. Kusuda, and M. Mabuchi, Sound absorption characteristics of porous aluminum fabricated by spacer method, J. Appl. Phys. 100 (2006), p. 114908.10.1063/1.2390543
   Web of Science ®Google Scholar
• J. Banhart, J. Baumeister, and M. Weber, Damping properties of aluminium foams, Mater. Sci. Eng. A 205 (1996), pp. 221–228.10.1016/0921-5093(95)09973-5
   Web of Science ®Google Scholar
• J. Banhart and H.W. Seeliger, Aluminium foam sandwich panels: Manufacture, metallurgy and applications, Adv. Eng. Mater. 10 (2008), pp. 793–802.10.1002/adem.v10:9
   Web of Science ®Google Scholar
• J. Banhart and H.W. Seeliger, Recent trends in aluminium foam sandwich technology, Adv. Eng. Mater. 14 (2012), pp. 1082–1087.10.1002/adem.v14.12
   Web of Science ®Google Scholar
• H.L. Yu, C. Lu, K. Tieu, H.J. Li, A. Godbole, and S.H. Zhang, Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: A review, Adv. Eng. Mater. 18 (2016), pp. 754–769.10.1002/adem.v18.5
   Web of Science ®Google Scholar
• H.L. Yu, K. Tieu, C. Lu, and A. Godbole, An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques, Metall. Mater. Trans. A 45 (2014), pp. 4038–4045.10.1007/s11661-014-2311-4
   Google Scholar
• H.L. Yu, C. Lu, K. Tieu, A. Godbole, Y. Sun, M. Liu, L.H. Su, D.L. Tang, and C. Kong, Fabrication of ultrathin nanostructured bimetal foils by accumulative roll bonding and asymmetric rolling, Sci. Rep. 3 (2013), p. 2373.10.1038/srep02373
   PubMed Web of Science ®Google Scholar
• F. Foadian, M. Soltanieh, M. Adeli, and M. Etminanbakhsh, A study on the formation of intermetallics during the heat treatment of explosively welded Al–Ti multilayers, Metall. Mater. Trans. A 45 (2014), pp. 1823–1832.10.1007/s11661-013-2144-6
   Google Scholar
• H.L. Yu, K. Tieu, C. Lu, and C. Kong, Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days, Philos. Mag. Lett. 94 (2014), pp. 732–740.10.1080/09500839.2014.971902
   Web of Science ®Google Scholar
• A.K. Stover, N.M. Krywopusk, G.M. Fritz, S.C. Barron, J.D. Gibbins, and T.P. Weihs, An analysis of the microstructure and properties of cold-rolled Ni: Al laminate foils, J. Mater. Sci. 48 (2013), pp. 5917–5929.10.1007/s10853-013-7387-5
   Web of Science ®Google Scholar
• K.L. Olney, P.H. Chiu, A. Higgins, M. Serge, T.P. Weihs, G.M. Fritz, A.K. Stover, D.J. Benson, and V.F. Nesterenko, The mechanisms of plastic strain accommodation during the high strain rate collapse of corrugated Ni–Al laminate cylinders, Philos. Mag. 94 (2014), pp. 3017–3035.10.1080/14786435.2014.948523
   Web of Science ®Google Scholar
• C.H. Jeon, S.W. Han, B.D. Joo, C.J. Van Tyne, and Y.H. Moon, Deformation analysis for cold rolling of Al–Cu double layered sheet by physical modeling and finite element method, Met. Mater. Int. 19 (2013), pp. 1069–1076.10.1007/s12540-013-5023-1
   Web of Science ®Google Scholar
• I. Kim and S.I. Hong, Effect of heat treatment on the bending behavior of tri-layered Cu/Al/Cu composite plates, Mater. Des. 47 (2013), pp. 590–598.10.1016/j.matdes.2012.12.070
   Web of Science ®Google Scholar
• M. Abbasi, A. Karimi Taheri, and M.T. Salehi, Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process, J. Alloy. Compd. 319 (2001), pp. 233–241.10.1016/S0925-8388(01)00872-6
   Web of Science ®Google Scholar
• L.Y. Sheng, F. Yang, T.F. Xi, C. Lai, and H.Q. Ye, Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling, Comp. Part B 42 (2011), pp. 1468–1473.10.1016/j.compositesb.2011.04.045
   Web of Science ®Google Scholar
• M. Eizadjou, A. Kazemi Talachi, H. Danesh Manesh, H. Shakur Shababi, and K. Janghorban, Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process, Comp. Sci. Technol. 68 (2008), pp. 2003–2009.10.1016/j.compscitech.2008.02.029
   Web of Science ®Google Scholar
• R. Beygi, M. Kazeminezhad, and A.H. Kokabi, Microstructural evolution and fracture behavior of friction-stir-welded Al–Cu laminated composites, Metall. Mater. Trans. A 45 (2014), pp. 361–370.10.1007/s11661-013-1989-z
   Web of Science ®Google Scholar
• M.W. Fu, J.L. Wang, and A.M. Korsunsky, A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components, Int. J. Mach. Tool. Manuf. 109 (2016), pp. 94–125.10.1016/j.ijmachtools.2016.07.006
   Web of Science ®Google Scholar
• D.B. Shan, C.J. Wang, B. Guo, and X.W. Wang, Effect of thickness and grain size on material behavior in micro-bending, Trans. Nonferrous Met. Soc. China 19 (2009), pp. s507–s510.10.1016/S1003-6326(10)60098-2
   Web of Science ®Google Scholar
• J. Wang, M. Fu, and J. Ran, Analysis of the size effect on springback behavior in micro-scaled U-bending process of sheet metals, Adv. Eng. Mater. 16 (2014), pp. 421–432.10.1002/adem.v16.4
   Web of Science ®Google Scholar
• H.L. Yu, K. Tieu, C. Lu, Y.S. Lou, X.H. Liu, A. Godbole, and C. Kong, Tensile fracture of ultrafine Al 6061 sheets by asymmetric cryorolling for microforming, Int. J. Damage Mech. 23 (2014), pp. 1077–1095.10.1177/1056789514538083
   Web of Science ®Google Scholar
• L. Li, K. Nagai, and F. Yin, Progress in cold roll bonding of metals, Sci. Technol. Adv. Mater. 9 (2008), p. 023001.10.1088/1468-6996/9/2/023001
   PubMed Web of Science ®Google Scholar
• H.L. Yu, C. Lu, A.K. Tieu, and C. Kong, Fabrication of nanostructure aluminum sheets using four-layer accumulative roll bonding, Mater. Manuf. Process. 29 (2014), pp. 448–453.10.1080/10426914.2013.872259
   Web of Science ®Google Scholar
• A. Mozaffari, H. Danesh Manesh, and K. Janghorban, Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process, J. Alloy. Compd. 489 (2010), pp. 103–109.10.1016/j.jallcom.2009.09.022
   Web of Science ®Google Scholar
• L.H. Su, C. Lu, K. Tieu, G.Y. Deng, and X.D. Sun, Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding, Mater. Sci. Eng. A 559 (2013), pp. 345–351.10.1016/j.msea.2012.08.109
   Web of Science ®Google Scholar
• H.L. Yu, K. Tieu, C. Lu, X. Liu, A. Godbole, H.J. Li, C. Kong, and Q.H. Qin, A deformation mechanism of hard metal surrounded by soft metal during roll forming, Sci. Rep. 4 (2014), p. 5017.
   PubMed Web of Science ®Google Scholar
• Y. Dong and J. Song, Research on the characteristics of forward slip and backward slip in alloyed bar rolling by the round-oval-round pass sequence, Int. J. Adv. Manuf. Technol. 87 (2016), pp. 3605–3617.10.1007/s00170-016-8731-0
   Web of Science ®Google Scholar
• H.L. Yu, C. Lu, K. Tieu, X.H. Liu, Y. Sun, Q.B. Yu, and C. Kong, Asymmetric cryorolling for fabrication of nanostructural aluminium sheets, Sci. Rep. 2 (2012), p. 4864.10.1038/srep00772
   Web of Science ®Google Scholar
• H.L. Yu, H.Y. Bi, X.H. Liu, L.Q. Chen, and N.N. Dong, Behavior of inclusions with weak adhesion to strip matrix during rolling using FEM, J. Mater. Process. Technol. 209 (2009), pp. 4274–4280.10.1016/j.jmatprotec.2008.11.004
   Web of Science ®Google Scholar
• E. Ervasti and U. Ståhlberg, Void initiation close to a macro-inclusion during single pass reductions in the hot rolling of steel slabs: A numerical study, J. Mater. Process. Technol. 170 (2005), pp. 142–150.10.1016/j.jmatprotec.2005.04.117
   Web of Science ®Google Scholar
• J. Kadkhodapour, A. Butz, and S. Ziaei Rad, Mechanisms of void formation during tensile testing in a commercial, dual-phase steel, Acta Mater. 59 (2011), pp. 2575-2588.
   Web of Science ®Google Scholar
• T.G. Langdon, A microscopic examination of void formation in superplastic materials, J. Microscopy 116 (1979), pp. 47–54.10.1111/jmi.1979.116.issue-1
   Web of Science ®Google Scholar
• T.S. Srivatsan, S. Sriram, D. Veeraraghavan, and V.K. Vasudevan, Microstructure, tensile deformation and fracture behaviour of aluminium alloy 7055, J. Mater. Sci. 32 (1997), pp. 2883–2894.10.1023/A:1018676501368
   Web of Science ®Google Scholar
• G. Gerstein, H.B. Besserer, F. Nürnberger, and H.J. Maier, Comparison of the mechanisms of void formation by plastic deformation in single- and dual-phase BCC-steels, in Characterization of Minerals, Metals, and Materials, J. Carpenter, C. Bai, J. Pablo Escobedo–Diaz, J.Y. Hwang, S. Ikhmayies, B. Li, J. Li, S. Neves, Z. Peng, M. Zhang, eds., Springer, Cham, 2015, pp. 75–81.
   Google Scholar