References
- X. Fan, D. Jiang, Q. Meng, Z. Lai and X. Zhang, Characterization of precipitation microstructure and properties of 7150 aluminium alloy, Mater. Sci. Eng. A. 427 (2006), pp. 130–135. doi: 10.1016/j.msea.2006.04.043
- P. Bai, X. Hou, X. Zhang, C. Zhao and Y. Xing, Microstructure and mechanical properties of a large billet of spray formed Al-Zn-Mg-Cu alloy with high Zn content, Mater. Sci. Eng. A. 508 (2009), pp. 23–27. doi: 10.1016/j.msea.2008.12.010
- J. Chen, L. Zhen, S. Yang, W. Shao and S. Dai, Investigation of precipitation behavior and related hardening in AA 7055 aluminum alloy, Mater. Sci. Eng. A. 500 (2009), pp. 34–42. doi: 10.1016/j.msea.2008.09.065
- F. Cao, J. Zheng, Y. Jiang, B. Chen, Y. Wang and T. Hu, Experimental and DFT characterization of η´ nano-phase and its interfaces in Al-Zn-Mg-Cu alloys, Acta Mater. 164 (2019), pp. 207–219. doi: 10.1016/j.actamat.2018.10.045
- K.-D. Bauer, M. Todorova, K. Hingerl and J. Neugebauer, A first principles investigation of zinc induced embrittlement at grain boundaries in bcc iron, Acta Mater. 90 (2015), pp. 69–76. doi: 10.1016/j.actamat.2015.02.018
- G. Sha, R.K.W. Marceau, X. Gao, B.C. Muddle and S.P. Ringer, Nanostructure of aluminium alloy 2024: Segregaion, clustering and precipitation processes, Acta Mater. 59 (2011), pp. 1659–1670. doi: 10.1016/j.actamat.2010.11.033
- N. Du, Y. Qi, P.E. Krajewski and A.F. Bower, Aluminum Σ3 grain boundary sliding enhanced by vacancy diffusion, Acta Mater. 58 (2010), pp. 4245–4252. doi: 10.1016/j.actamat.2010.04.016
- J.M. Rosalie and L. Bourgeois, Silver segregation to θ´ (Al2Cu)-Al interfaces in Al-Cu-Ag alloys, Acta Mater. 60 (2012), pp. 6033–6041. doi: 10.1016/j.actamat.2012.07.039
- D. Shin, A. Shyam, S. Lee, Y. Yamamoto and J. Allen Haynes, Solute segregation at the Al/θ´-Al2Cu interface in Al-Cu alloys, Acta Mater. 141 (2017), pp. 327–340. doi: 10.1016/j.actamat.2017.09.020
- B.P. Huang and Z.Q. Zheng, Independent and combined roles of trace Mg and Ag additions in properties precipitation process and precipitation kinetics of Al-Cu-Li-(Mg)-(Ag)-Zr-Ti alloys, Acta Mater. 46 (1998), pp. 4381–4393. doi: 10.1016/S1359-6454(98)00079-2
- L.P. Huang and Z.Q. Zheng, The alloying effects of minor Ag and Mg in 2197 alloys, Heat Treat. Met. 30(4) (2005), pp. 21–25.
- D. Tsivoulas and P.B. Prangnell, The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al-Cu-Li AA2198 sheet, Acta Mater. 77 (2014), pp. 1–16. doi: 10.1016/j.actamat.2014.05.028
- P. Lequeu, K.P. Smith and A. Danielou, Aluminum-Copper-Lithium alloy 2050 developed for medium to thick plate, J. Mater. Eng. Perform. 19 (2010), pp. 841–847. doi: 10.1007/s11665-009-9554-z
- Z. Peng, J.F. Li, F.J. Sang, Y.L. Chen, X.H. Zhang, Z.Q. Zheng and Q.L. Pan, Structures and tensile properties of Sc-containing 1445 Al-Li alloy sheet, J. Alloy. Comp. 747 (2018), pp. 471–483. doi: 10.1016/j.jallcom.2018.03.032
- J.F. Li, N. Birbilis, D.Y. Liu, Y.L. Chen, X.H. Zhang and C. Cai, Intergranular corrosion of Zn-free and Zn micro-alloyed Al-xCu-yLi alloys, Corrosion Sci. 105 (2016), pp. 44–57. doi: 10.1016/j.corsci.2016.01.001
- D. K. Denker, R. J. Rioja, G. B. Venema, E. L. Colvin, H. Weiland, A. D. Rollett and W. A. Cassada, (eds.), Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13), Pittsburg, TMS, 2012. 587.
- X.F. Luo, Z.Q. Zheng, J.F. Zhong, H.F. Zhang, J. Zhong, S.C. Li and J.F. Li, Effects of Mg, Ag and Zn multi-alloying on aging behavior of new Al-Cu-Li alloy, Chin. J. Nonferrous Met. 23 (2013), pp. 1833–1842.
- T. Dursun and C. Soutis, Recent developments in advanced aircraft aluminium alloys, Mater. Des 56 (2014), pp. 862–871. doi: 10.1016/j.matdes.2013.12.002
- M. Murayama and K. Hono, Three dimensional atom probe Aanalysis of pre-precipitate clustering in an Al-Cu-Mg-Ag alloy, Scr. Mater. 38 (1998), pp. 1315–1319. doi: 10.1016/S1359-6462(98)00027-X
- H. Ovri and E.T. Lilleodden, New insights into plastic instability in precipitation strengthened Al-Li alloys, Acta Mater. 89 (2015), pp. 88–97. doi: 10.1016/j.actamat.2015.01.065
- H. Rösner, A. Kalogeridis, W. Liu, J. Pesicka and E. Nembach, Dislocation mechanisms in Al-rich Al-Li alloys, Mater. Sci. Eng. A. 234-236 (1997), pp. 298–301. doi: 10.1016/S0921-5093(97)00243-8
- J.G. Yao, R.K. Pan, Y. Jiang, D.F. Yin and H. Wang, Cu segregation at α-Al(111)/ δ´-Al3Li(111) interface, Eur. Phys. J. B. 91 (2018), pp. 1–6. doi: 10.1140/epjb/e2017-80535-3
- G. Kresse and J. Furthmuller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B. 54(16) (1996), pp. 11169–11186. doi: 10.1103/PhysRevB.54.11169
- G. Kresse and J. Joubert, From ultrasoft pseudopotentials to the projector augmented wave method, Phys. Rev. B. 59(3) (1999), pp. 1758–1775. doi: 10.1103/PhysRevB.59.1758
- J.P. Perdew, K.M. Burke and M. Emzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett. 77(18) (1996), pp. 3865–3868. doi: 10.1103/PhysRevLett.77.3865
- Y.J. Gao, C.L. Wen, Q.F. Mo, Z.R. Luo and C.G. Huang, Interface atomic bonding and mechanical properties of Al–Li-Zr alloy, Chin. J. Nonferrous Met. 21(9) (2011), pp. 2202–2208.
- Z. Mao, W. Chen, D.N. Seidman and C. Wolverton, First-principles study of the nucleation and stability of ordered precipitates in ternary Al-Sc-Li alloys, Acta Mater. 59(8) (2011), pp. 3012–3023. doi: 10.1016/j.actamat.2011.01.041
- M.E. Krug, D.C. Dunand and D. Seidman, Effects of Li additions on precipitation-strengthened Al–Sc and Al–Sc–Yb alloys, Acta Mater. 59(4) (2011), pp. 1700–1715. doi: 10.1016/j.actamat.2010.11.037
- J.G. Yao, C.M. Zhang, Y. Jiang, H. Tao and D.F. Yin, Prediction on elastic properties of off-stoichiometric L12-Al3Li intermetallic due to point defects, Comput. Mater. Sci. 107 (2015), pp. 184–189. doi: 10.1016/j.commatsci.2015.05.027
- J.G. Yao, R.K. Pan, D.F. Yin, Y. Jiang and H. Wang, Prediction on elastic and thermal properties of defective L12–Al3Li intermetallics, Indian J. Phys. 92(9) (2018), pp. 1083–1089. doi: 10.1007/s12648-018-1208-2
- J. Tian, Y. Zhao, H. Hou and B. Wang, The effect of alloying elements on the structural stability, mechanical properties, and debye temperature of Al3Li: A first-principles study. Materials. 11 (2018), pp. 1471 (3–10). doi: 10.3390/ma11081471