References
- B. Amir E, B. Nami, M. Shahmiri and A. Abedi, Effect of Mg and semi solid processing on microstructure and impression creep properties of A356 alloy. T. Nonferr. Metal. Soc 23 (2013), pp. 2518–2523. doi: 10.1016/S1003-6326(13)62763-6
- D.Q. Wan, Si phase morphology and mechanical properties of ZL107 Al alloy improved by La modification and heat treatment. T. Nonferr. Metal. Soc 22 (2012), pp. 1051–1054. doi: 10.1016/S1003-6326(11)61282-X
- K. Zhang, S.L. Dai, M. Huang and M.G. Yan, Effect of long time thermal exposure on Microstructures of Al-Cu-Mg-Ag Alloy. J. Mater. Eng. Perform 11 (2007), pp. 15–19.
- C.S. Liauo, H. Chang, J.C. Huang and P.W. Kao, Microstructural evolution and mechanical properties of AC8A/Al2O3 short-fiber composites after thermal exposure at 150℃ to 350℃. Metall. Mater. Trans. A 26 (1995), pp. 143–158. doi: 10.1007/BF02669800
- Y.H. Hou, Z.Y. Liu, Q.K. Xia, Y.T. Li and Y.B. Liu, Simulation of thermal exposure effect on under-aged AI-Cu-Mg-Ag alloys, Chin. J. MATER. RES 23 (2009), pp. 550–556.
- J. Wang, R.D. Fu, Y.J. Li and J.F. Zhang, Effects of deep cryogenic treatment and low-temperature aging on the mechanical properties of friction-stir-welded joints of 2024-T351 aluminum alloy. Mater. Sci. Eng. A 609 (2014), pp. 147–153. doi: 10.1016/j.msea.2014.04.077
- X.G. Yuan, L.Q. Ren and X.L. Dong, Effect of aging on lattice constant of α-Al phase in microcrystalline Al-Si alloy. J Liaoning Tech U: Nat Sci 03 (1999), pp. 269–273.
- H.R. Li, Practical Method of X-ray Diffraction Analysis of Materials, Metallurgical Industry Press, Beijing, 1994.
- A. Bendijk, R. Delhez, L. Katgerman, T.H.H. Dekeijser, E.J. Mittemeijer and N.M. Vanderpers, Characterization of Al-Si alloys rapidly quenched from the melt. J. Mater. Sci 15 (1980), pp. 2803–2810. doi: 10.1007/BF00550549
- АИ Samoilov and Y.Q. Hao, Effect of lattice distortion on properties of alloy. J. Mater. Eng 02 (1958), pp. 17–25.
- M.N. James, Residual stress influences on structural reliability. Eng. Fail. Anal 18 (2011), pp. 1909–1920. doi: 10.1016/j.engfailanal.2011.06.005
- Y.D. Sui, Study on The Microstructural And Elevated Temperature Properties of Cast Al-Si-Cu-Ni-Mg Alloys, Metallurgical Industry Press, Beijing, 2017.
- C.R. Barbosa, G.H. Machado, H.M. Azevedo, F.S. Rocha, J.C. Filho, A.A. Pereira and O.L. Rocha, Tailoring of Processing Parameters, dendritic microstructure, Si/intermetallic particles and Microhardness in As-cast and heat-Treated samples of Al7Si0.3Mg alloy. Met. Mater. Int. 26 (2020), pp. 370–383. doi: 10.1007/s12540-019-00334-y
- M.F. Ibrahim, A.M. Samuel, F.H. Samuel and H.W. Doty, Effect of aging conditions on precipitation hardening in Al-Si-Mg and Al-Si-Cu-Mg alloys. Int. J. Metalcast 11 (2017), pp. 274–286. doi: 10.1007/s40962-016-0057-z
- M.Z. Zhou, D.Q. Yi, J.L. Cai, H.W. Wang and Y. Lu, Effect of heat exposure on microstructure and fatigue properties of aerial 2E12 aluminum alloy. T. Mater. Heat Treat 32 (2011), pp. 49–55.
- C. Montross, T. Wei and L. Ye, Laser shock processing and its effects on microstructure and properties of metal alloys: A review. Int. J. Fatigue 24 (2002), pp. 1021–1036. doi: 10.1016/S0142-1123(02)00022-1
- Y.S. Hu, The effects of Si、Cu addition and heat treatment on the microstructure and properties of Al-30Zn Aluminum-High Zinc Alloy, M.D. diss., Zhengzhou University, 2017.
- G.L. Liu, L.Y. Zhang, M.J. Li, H. Wan, R. Ding and N.C. Si, Effect of heat treatment on mechanical properties, microstructures and wear resistance of Al-Si-Cu alloy. Tribol 37 (2017), pp. 618–624.
- G. Rajaram, S. Kumaran and T.S. Rao, Effect of graphite and transition elements (Cu, Ni) on high temperature tensile behaviour of Al-Si alloys. Mater. Chem. Phys 128 (2011), pp. 62–69. doi: 10.1016/j.matchemphys.2011.02.069