Texture and grain boundary engineering in electrodeposited SnCu coatings and its effect on coating corrosion behaviour

References

• H. Kim, T. Koseki, T. Ohba, T. Ohta, Y. Kojima, H. Sato and Y. Shimogaki, Process design of Cu(Sn) alloy deposition for highly reliable ultra large-scale integration interconnects. Thin Solid Films 491 (2005), pp. 221–227.
   Web of Science ®Google Scholar
• X. Zhai, P. Ju, F. Guan, Y. Ren, X. Liu, N. Wang, Y. Zhang, J. Duan, C. Wang and B. Hou, Electrodeposition of capsaicin-induced ZnO/Zn nanopillar films for marine antifouling and antimicrobial corrosion. Surf. Coatings Technol. 397 (2020), p. 125959.
   Web of Science ®Google Scholar
• Q. Zhao, J. Zhao, X. Cheng, Y. Huang, L. Lu and X. Li, Galvanic corrosion of the anodized 7050 aluminum alloy coupled with the low hydrogen embrittlement Cd[sbnd]Ti plated 300M steel in an industrial-marine atmospheric environment. Surf. Coatings Technol. 382 (2020), p. 125171.
   Web of Science ®Google Scholar
• Y. Raghupathy, K.A. Natarajan and C. Srivastava, Anti-corrosive and anti-microbial properties of nanocrystalline Ni-Ag coatings. Mater. Sci. Eng. B. 206 (2016), pp. 1–8.
   Web of Science ®Google Scholar
• R. Fratesi and G. Roventi, Corrosion resistance of Zn-Ni alloy coatings in industrial production. Surf. Coatings Technol. 82 (1996), pp. 158–164.
   Web of Science ®Google Scholar
• S. Rashmi, L. Elias and A. Chitharanjan Hegde, Multilayered Zn-Ni alloy coatings for better corrosion protection of mild steel. Eng. Sci. Technol. an Int. J. 20 (2017), pp. 1227–1232.
   Google Scholar
• S. Alex, B. Basu, S. Sengupta, U.K. Pandey and K. Chattopadhyay, Electrodeposition of δ-phase based Cu–Sn mirror alloy from sulfate-aqueous electrolyte for solar reflector application. Appl. Therm. Eng. 109 (2016), pp. 1003–1010.
   Web of Science ®Google Scholar
• J. Liu, X. Fang, C. Zhu, X. Xing, G. Cui and Z. Li, Fabrication of superhydrophobic coatings for corrosion protection by electrodeposition: a comprehensive review. Colloids Surfaces A Physicochem. Eng. Asp. 607 (2020), p. 125498.
   Web of Science ®Google Scholar
• S.H. Wang, X.W. Guo, C. Sun, J. Gong, L.M. Peng and W.J. Ding, Electrodeposition of Cu coating with high corrosion resistance on Mg-3.0Nd-0.2Zn-0.4Zr magnesium alloy. Trans. Nonferrous Met. Soc. China 24 (2014), pp. 3810–3817.
   Web of Science ®Google Scholar
• L. Anicai, A. Petica, S. Costovici, P. Prioteasa and T. Visan, Electrodeposition of Sn and NiSn alloys coatings using choline chloride based ionic liquids - evaluation of corrosion behavior. Electrochim. Acta 114 (2013), pp. 868–877.
   Web of Science ®Google Scholar
• K. Ui, S. Kikuchi, Y. Kadoma, N. Kumagai and S. Ito, Electrochemical characteristics of Sn film prepared by pulse electrodeposition method as negative electrode for lithium secondary batteries. J. Power Sources 189 (2009), pp. 224–229.
   Web of Science ®Google Scholar
• K.O. Nayana, S. Ranganatha, H.N. Shubha and M. Pandurangappa, Effect of sodium lauryl sulphate on microstructure, corrosion resistance and microhardness of electrodeposition of Ni–Co3O4 composite coatings. Trans. Nonferrous Met. Soc. China 29 (2019), pp. 2371–2383.
   Web of Science ®Google Scholar
• C.R. Thurber, Y.H. Ahmad, S.F. Sanders, A. Al-Shenawa, N. D’Souza, A.M.A. Mohamed and T.D. Golden, Electrodeposition of 70-30 Cu-Ni nanocomposite coatings for enhanced mechanical and corrosion properties. Curr. Appl. Phys. 16 (2016), pp. 387–396.
   Web of Science ®Google Scholar
• Z. Wang, T. Wu, J. Ru, Y. Hua, J. Bu and D. Wang, Eco-friendly preparation of nanocrystalline Fe-Cr alloy coating by electrodeposition in deep eutectic solvent without any additives for anti-corrosion. Surf Coatings Technol. 406 (2021), p. 126636.
   Web of Science ®Google Scholar
• M. Jung, G. Lee and J. Choi, Electrochemical plating of Cu-Sn alloy in non-cyanide solution to substitute for Ni undercoating layer. Electrochim. Acta 241 (2017), pp. 229–236.
   Web of Science ®Google Scholar
• W.A.T. Dos Santos, W.I.A. Dos Santos, S.L. De Assis, M. Terada and I. Costa, Bronze as alternative for replacement of nickel in intermediate layers underneath gold coatings. Electrochim. Acta 114 (2013), pp. 799–804.
   Web of Science ®Google Scholar
• I. Volov, X. Sun, G. Gadikota, P. Shi and A.C. West, Electrodeposition of copper-tin film alloys for interconnect applications. Electrochim. Acta 89 (2013), pp. 792–797.
   Web of Science ®Google Scholar
• F.C. Walsh and C.T.J. Low, A review of developments in the electrodeposition of tin. Surf. Coatings Technol. 288 (2016), pp. 79–94.
   Web of Science ®Google Scholar
• S. Xing, Environmentally friendly baths for Cu-Sn co-electrodeposition: cyanide-free aqueous bath and deep eutectic solvents, PhD thesis, University of Trento, 2014.
   Google Scholar
• N. Pewnim and S. Roy, Electrodeposition of tin-rich Cu-Sn alloys from a methanesulfonic acid electrolyte. Electrochim. Acta 90 (2013), pp. 498–506.
   Web of Science ®Google Scholar
• C.M.P. Kumar, T.V. Venkatesha and R. Shabadi, Preparation and corrosion behavior of Ni and Ni–graphene composite coatings. Mater. Res. Bull. 48 (2013), pp. 1477–1483.
   Web of Science ®Google Scholar
• V. Ezhilselvi, H. Seenivasan, P. Bera and C. Anandan, Characterization and corrosion behavior of Co and Co-P coatings electrodeposited from chloride bath. RSC Adv. 4 (2014), pp. 46293–46304.
   Web of Science ®Google Scholar
• P. Wang, D. Zhang, R. Qiu, Y. Wan and J. Wu, Green approach to fabrication of a super-hydrophobic film on copper and the consequent corrosion resistance. Corros. Sci. 80 (2014), pp. 366–373.
   Web of Science ®Google Scholar
• K.S. Jyotheender and C. Srivastava, Ni-graphene oxide composite coatings: optimum graphene oxide for enhanced corrosion resistance. Compos. Part B Eng. 175 (2019), pp. 107145.
   Web of Science ®Google Scholar
• V. Ezhilselvi, H. Seenivasan, P. Bera and C. Anandan, Characterization and corrosion behavior of Co and Co-P coatings electrodeposited from chloride bath. RSC Adv. 4 (2014), p. 46293.
   Web of Science ®Google Scholar
• H. Beladi and G.S. Rohrer, The distribution of grain boundary planes in interstitial free steel. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44 (2013), pp. 115–124.
   Google Scholar
• P. Jagtap and P. Kumar, Manipulating crystallographic texture of Sn coatings by optimization of electrodeposition process conditions to suppress growth of whiskers. J. Electron. Mater. 44 (2015), pp. 12–19.
   Web of Science ®Google Scholar
• M.S. Sellers, A.J. Schultz, C. Basaran and D.A. Kofke, Atomistic modeling of β-Sn surface energies and adatom diffusivity. Appl. Surf. Sci. 256 (2010), pp. 4402–4407.
   Web of Science ®Google Scholar
• L.P. Lehman, Y. Xing, T.R. Bieler and E.J. Cotts, Cyclic twin nucleation in tin-based solder alloys. Acta Mater. 58 (2010), pp. 3546–3556.
   Web of Science ®Google Scholar
• A.U. Telang, T.R. Bieler, J.P. Lucas, K.N. Subramanian, L.P. Lehman, Y. Xing and E.J. Cotts, Grain-boundary character and grain growth in bulk tin and bulk lead-free solder alloys. J. Electron. Mater. 33 (2004), pp. 1412–1423.
   Web of Science ®Google Scholar
• G.S. Rohrer, D.M. Saylor, B. El Dasher, B.L. Adams, A.D. Rollett and P. Wynblatt, The distribution of internal interfaces in polycrystals. Zeitschrift Fuer Met. Res. Adv. Tech. 95 (2004), pp. 197–214.
   Google Scholar
• L. Wu, J.E. Graves and A.J. Cobley, Mechanism for the development of Sn-Cu alloy coatings produced by pulsed current electrodeposition. Mater. Lett. 217 (2018), pp. 120–123.
   Web of Science ®Google Scholar
• S.C. Britton and D.G. Michael, The corrosion of tin and tinned copper in dilute neutral solutions. J. Appl. Chem. 7 (2007), pp. 349–356.
   Google Scholar