References
- T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas, Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions, Prog. Mater. Sci 60 (2014), pp. 130–207. https://doi.org/10.1016/j.pmatsci.2013.09.002.
- J.E. Burke and D. Turnbull, Recrystallization and grain growth, Prog. Met Phys 3 (1952), pp. 220–292. https://doi.org/10.1016/0502-8205(52)90009-9.
- R.W. Cahn, Recrystallization mechanisms, in Recrystallization, Grain Growth and Textures, H. Margolin, editor., ASM, Ohio, 1966, pp. 99–127.
- R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett, Current issues in recrystallization: a review, Mater. Sci. Eng. A 238 (1997), pp. 219–274. https://doi.org/10.1016/S0921-5093(97)00424-3.
- G. Dieter, Mechanical Metallurgy, 3rd ed., McGraw Hill, New York, 1986.
- Y. Liu, Y.C. Lina, and Y. Zhou, 2D cellular automaton simulation of hot deformation behavior in a Ni-based superalloy under varying thermal-mechanical conditions, Mater. Sci. Eng. A 691 (2017), pp. 88–99. https://doi.org/10.1016/j.msea.2017.03.039.
- E.I. Galindo-Nava and C.M.F. Rae, Microstructure evolution during dynamic recrystallization in polycrystalline nickel superalloys, Mater. Sci. Eng. A 636 (2015), pp. 434–445. https://doi.org/10.1016/j.msea.2015.03.121.
- M. El Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado, Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels, Acta Mater. 53 (2005), pp. 4605–4612. https://doi.org/10.1016/j.actamat.2005.06.020.
- F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 1st ed., Pergamon Press, Oxford, 1995.
- S. Gourdet and F. Montheillet, A model of continuous dynamic recrystallization, Acta Mater 51 (2003), pp. 2685–2699. https://doi.org/10.1016/S1359-6454(03)00078-8.
- M. El Wahabi, J.M. Cabrera, and J.M. Prado, Hot working of two AISI 304 steels: a comparative study, Mater. Sci. Eng. A 343 (2003), pp. 116–125. https://doi.org/10.1016/S0921-5093(02)00357-X.
- M.S. Chen, Y.C. Lin, K.K. Li, and Y. Zhou, A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy, Comput. Mater Sci. 122 (2016), pp. 150–158. https://doi.org/10.1016/j.commatsci.2016.05.016.
- J. Liu, Z. Cui, and L. Ruan, A new kinetics model of dynamic recrystallization for magnesium alloy AZ31B, Mater. Sci. Eng. A 529 (2011), pp. 300–310. https://doi.org/10.1016/j.msea.2011.09.032.
- C. Li, L. Huang, M. Zhao, X. Zhang, J. Li, and P. Li, Influence of hot deformation on dynamic recrystallization behavior of 300M steel: rules and modeling, Mater. Sci. Eng. 797 (2020), pp. 139925. https://doi.org/10.1016/j.msea.2020.139925.
- X.M. Chen, Y.C. Lin, D.X. Wen, J.L. Zhang, and M. He, Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation, Mater. Des. 57 (2014), pp. 568–577. https://doi.org/10.1016/j.matdes.2013.12.072.
- H. Hallberg, Approaches to modeling of recrystallization, Metals 1 (2011), pp. 16–48. https://doi.org/10.3390/met1010016.
- W. Roberts and B. Ahlblom, A nucleation criterion for dynamic recrystallization during hot working, Acta Metall. 26 (1978), pp. 801–813. https://doi.org/10.1016/0001-6160(78)90030-5.
- M. Shaban and B. Eghbali, Determination of critical conditions for dynamic recrystallization of a microalloyed steel, Mater. Sci. Eng. A 527 (2010), pp. 4320–4325. https://doi:10.1016/j.msea.2010.03.086.
- R. Ding and Z.X. Guo, Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization, Acta Mater. 49 (2001), pp. 3163–3175. https://doi.org/10.1016/S1359-6454(01)00233-6.
- H.S. Zurob, Y. Bréchet, and J. Dunlop, Quantitative criterion for recrystallization nucleation in single-phase alloys: prediction of critical strains and incubation times, Acta Mater. 54(15) (2006), pp. 3983–3990. https://doi.org/10.1016/j.actamat.2006.04.028.
- D.G. Cram, H.S. Zurob, Y.J.M. Brechet, and C.R. Hutchinson, Modelling discontinuous dynamic recrystallization using a physically based model for nucleation, Acta Mater. 57 (2009), pp. 5218–5228. https://doi.org/10.1016/j.actamat.2009.07.024.
- R.L. Goetz and V. Seetharaman, Modeling dynamic recrystallization using cellular automata, Scr. Mater. 38 (1998), pp. 405–413. https://doi.org/10.1016/S1359-6462(97)00500-9.
- D. Raabe, Cellular automata in materials science with particular reference to recrystallization simulation, Annu. Rev. Mater. Res. 32 (2002), pp. 53–76. https://doi.org/10.1146/annurev.matsci.32.090601.152855.
- C. Zheng, N. Xiao, D. Li, and Y. Li, Microstructure prediction of the austenite recrystallization during multi-pass steel strip hot rolling: a cellular automaton modeling, Comput. Mater. Sci. 44 (2008), pp. 507–514. https://doi.org/10.1016/j.commatsci.2008.04.010.
- A.D. Rollett, Overview of modeling and simulation of recrystallization, Prog. Mater. Sci. 42 (1997), pp. 79–99. https://doi.org/10.1016/S0079-6425(97)00008-X.
- H. Hallberg, A modified level set approach to 2D modeling of dynamic recrystallization, Modell. Simul. Mater. Sci. Eng. 21 (2013), pp. 085012. https://doi.org/10.1088/0965-0393/21/8/085012.
- T. Takaki, T. Hirouchi, Y. Hisakuni, A. Yamanaka, and Y. Tomita, Multi-phase-field model to simulate microstructure evolutions during dynamic recrystallization, Mater. Trans. 49(11) (2008), pp. 2559–2565. https://www.jim.or.jp/journal/e/pdf3/49/11/2559.pdf.
- T. Takaki, Y. Hisakuni, T. Hirouchi, A. Yamanaka, and Y. Tomita, Multi-phase-field simulations for dynamic recrystallization, Comput. Mater. Sci. 45(4) (2009), pp. 881–888. https://doi.org/10.1016/j.commatsci.2008.12.009.
- T. Takaki, A. Yamanaka, and Y. Tomita, Multi-phase-field simulations of dynamic recrystallization during transient deformation, ISIJ Int. 51 (2011), pp. 1717–1723. https://www.jstage.jst.go.jp/article/isijinternational/51/10/51_10_1717/_article.
- N. Moelans, A. Godfrey, Y. Zhang, and D. Juul Jensen, Phase-field simulation study of the migration of recrystallization boundaries, Phys. Rev. B 88 (2013), p. 054103. https://doi.org/10.1103/PhysRevB.88.054103.
- G. Abrivard, E. Busso, S. Forest, and B. Appolaire, Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part I: theory and numerical implementation, Philos. Mag. 92 (2012), pp. 3618–3642. https://doi.org/10.1080/14786435.2012.713135.
- G. Abrivard, E. Busso, S. Forest, and B. Appolaire, Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part II: application to recrystallisation, Phil. Mag.92 (2012), pp. 3643–3664. https://doi.org/10.1080/14786435.2012.717726.
- N. Xiao, P. Hodgson, B. Rolfe, and D. Li, Modelling discontinuous dynamic recrystallization using a quantitative multi-order-parameter phase-field method, Comput. Mater. Sci. 155 (2018), pp. 298–311. https://doi.org/10.1016/j.commatsci.2018.09.001.
- M. Chen, W. Yuan, H. Li, and Z. Zou, Modeling and simulation of dynamic recrystallization behaviors of magnesium alloy AZ31B using cellular automaton method, Comput. Mater. Sci. 136 (2017), pp. 163–172. http://dx.doi.org/10.1016/j.commatsci.2017.05.009.
- M. Wang, C. Sun, M.W. Fu, Z. Liu, and C. Wang, Experimental investigations and constitutive modeling of the dynamic recrystallization behavior of Inconel 740 superalloy, Mater. Sci. Eng. A 793 (2020), p. 139939. https://doi.org/10.1016/j.msea.2020.139939.
- L. Mairea, B. Scholtesa, C. Moussaa, N. Bozzoloa, D.P. Muñoza, A. Settefrati, and M. Bernackia, Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws, Mater. Des. 133 (2017), pp. 498–519. http://dx.doi.org/10.1016/j.matdes.2017.08.015.
- E.I. Galindo-Nava and C.M.F. Rae, Microstructure evolution during dynamic recrystallisation in polycrystalline nickel superalloys, Mater. Sci. Eng. A 636 (2015), pp. 434–445. http://dx.doi.org/10.1016/j.msea.2015.03.121.
- J.S. Blázquez, C.F. Conde, and A. Conde, On the use of classical JMAK crystallization kinetic theory to describe simultaneous processes leading to the formation of different phases in metals, Int. J. Therm. Sci. 88 (2015), pp. 1–6. https://doi.org/10.1016/j.ijthermalsci.2014.09.004.
- G. Shen, S.L. Semiatin, and R. Shivpur, Modeling microstructural development during the forging of waspaloy, Metall. Mater. Trans. A 26 (1995), pp. 1795–1803. https://doi.org/10.1007/BF02670767.
- D. Wen, Y.C. Lin, and Y. Zhou, A new dynamic recrystallization kinetics model for a Nb containing Ni-Fe-Cr-base superalloy considering influences of initial δ phase, Vacuum 141 (2017), pp. 316–327. http://dx.doi.org/10.1016/j.vacuum.2017.04.030.
- A. Laasraoui and J.J. Jonas, Recrystallization of austenite after deformation at high temperatures and strain rates–analysis and modeling, Metall. Trans. A 22 (1991), pp. 151–160. https://doi.org/10.1007/BF03350957.
- S. Serajzadeh and A.K. Taheri, Prediction of flow stress at hot working condition, Mech. Res. Commun. 30 (2003), pp. 87–93.
- R. Kopp, M.L. Cao, and M.M.D. Souza. Proceedings of the Second International Conference on Technology of Plasticity (August 24/28), Lange Kurt, eds., Stuttgart, 1987. pp. 1129–1134.
- R. Kopp, K. Karnhausen, and M.M.d. Souza, Scand. J. Metall. 20 (1991), pp. 351–363.
- B.J. Lv, J. Peng, D.W. Shi, A.T. Tang, and F.S. Pan, Constitutive modeling of dynamic recrystallization kinetics and processingmaps of Mg−2.0Zn−0.3Zr alloy based on true stress–strain curves, Mater. Sci. Eng. A 560 (2013), pp. 727–733. https://doi.org/10.1016/j.msea.2012.10.025.
- S.-I. Kim, Y. Lee, D.-L. Lee, and Y.-C. Yoo, Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation, Mater. Sci. Eng. A 355 (2003), pp. 384–393. https://doi.org/10.1016/S0921-5093(03)00104-7.
- S.-I. Kim and Y.-C. Yoo, Dynamic recrystallization behavior of AISI 304 stainless steel, Mater. Sci. Eng. A 311 (2001), pp. 108–113. https://doi.org/10.1016/S0921-5093(01)00917-0.
- P.M. Ahmedabadi and V. Kain, Kinetics parameters for deformation-induced martensitic transformation in austenitic stainless steels, Philos. Mag. Lett. 100 (2020), pp. 555–560. https://doi.org/10.1080/09500839.2020.1817599.
- P.M. Ahmedabadi and V. Kain, Modelling transformation kinetics of different solid-state reactions using sigmoidal model, Materialia 5 (2019), p. 100235. https://doi.org/10.1016/j.mtla.2019.100235.
- P.M. Ahmedabadi, V. Kain, and A. Agrawal, Modelling kinetics of strain-induced martensite transformation during plastic deformation of austenitic stainless steel, Mater. Des. 109 (2016), pp. 466–475. https://doi.org/10.1016/j.matdes.2016.07.106.
- Y. Xu, L. Hua, and Y. Sun, Deformation behaviour and dynamic recrystallization of AZ61 magnesium alloy, J. Alloys Compd. 580 (2013), pp. 262–269. http://dx.doi.org/10.1016/j.jallcom.2013.05.082.